real living A208023302 User manual

TM
WINE BARREL BAR TABLE
ASSEMBLY INSTRUCTIONS
ITEM#: A208023302
SKU#:810497081
Need help? We are here for you! 1(866)578 – 6569 24/7 • Toll Free

WARRANTY:
WARNINGS:
MAINTENANCE
GENERAL BEST PRACTICES FOR ASSEMBLY:
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Standing on or misuse of this table may result in damage and injury. Read and follow mfg. assembly and use instructions. Not
intended for commercial use.
• Keep all children and pets away from assembly area.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Steel components for this table are treated with rust inhibiting paint that protects it from rusting. However, due to the nature
of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and thus not
covered by the warranty.
• Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
• Keep instruction manual for future reference.
• Surface rust can also be easily removed with a very light application of regular cooking oil or WD-40. If surface oxidation
(rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping onto deck or patio and caused-
damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned measures are taken to
keep the product from oxidizing.
2/12

EXPLODED DRAWING
3/12

PARTS LIST
Label Part Number Description Qty Part Image
A P002100203 Table Top 1
B P005400528 Side Panel 1
P005400532
2
C Side Panel 2 2
D P004200040 Shelf
P004700010
1
E Base 1
F P005000318 Pedal Pipe 1
G P002200056 Connector 6
J P005300057 Foot pad
Pre-assembled 6
4/12

HARDWARE LIST
Label Part Number Description Qty Add Part Image
H1 H010010087 Bolt M6*20 38 4
H2 H010010004 Bolt M6*354 1
H3 H050010025 Flat washer
M6 46 5
H4 H040070002 Nut M6 4 1
HW H090010017 Wrench M6 2 0
5/12

HELPFUL HINTS
• Separating parts before starting
Provided in hardware pack
How many people needed for the installation
6/12

STEP 1
Assembled View:
7/12
Attached Side Panel1(B) to Side
Panel 2(C) with Bolt H2, Flat washer
H3 and Nut(H4), tighten the Bolt
H2 to 80% depth with
Wrench(HW).
2x
2x
4x
8x4x

Assembled View:
8/12
Attached the Base(E) to Side
Panel1/2(B/C) with Bolt H1 and
Flat washer H3, tighten the Bolt H1
to 80% depth with Wrench(HW).
STEP 2
8x
1x
8x

STEP 3
Assembled View:
9/12
Attached Shelf(D) to Side
Panel1/2(B/C) with Bolt H1 and
Flat Washer H3, tighten the Bolt H1
to 80% depth with Wrench(HW).
4x 4x
1x

STEP 4
Assembled View:
10/12
Attached Connector(G) to Side
Panel1/2(B/C) with Bolt H1 and
Flat Washer H3, tighten the Bolt H1
to 80% depth with Wrench(HW).
12x12x
6x