real living BQ092-1321 User manual

Page 2 of 8
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Regularly check hardware and tighten if necessary.
Use dry cloth to wipe surfaces.
Keeping Away from water and fire.
SUGGEST 2 ADULTS TO ASSEMBLE THIS PRODUCT IN AN OPEN AREA.
DO NOT USE POWER TOOLS TO ASSEMBLE
TO PREVENT SERIOUS INJURY OR DEATH, THIS PRODUCT IS EQUIPPED WITH A WALL ANCHORING SYSTEM.
BEFORE THIS PRODUCT CAN BE USED, THE WALL ANCHORING SYSTEM MUST BE INSTALLED AS DIRECTED IN
THE ASSEMBLY INSTRUCTIONS.
Read all instructions before starting
Clear a flat covered space to begin
Two adults are recommended for assembly
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its number in the package
Helpful hints provided along the way

Page 3 of 6
Page 3 of 8
NO QTY DESCRIPTION
A 2pcs
B3pcs
C2pcs
D1pc
E1pc
F 3pcs
G 3pcs
PARTS LIST
Large Shelf Panel
Small Shelf Panel
Front Upper Frame
Back Upper Frame
L Shape Tube 1
L Shape Tube 2
H2pcs
I 2pcs
J 2pcs
Left Link Tube
Right Link Tube
Short Link Tube
K1pc
L 1pc
Bottom Metal Leg
G
G
G
A
A
J
J
L
C
C
B
B
B
D
F
F
F
E
H
H
K
I
I
Front Bottom Frame
Back Bottom Frame

Page 4 of 8
Screw(4×35mm)
4
54pcs
20pcs
38pcs
HARDWARE LIST
NO QTYPARTS DESCRIPTION
1 24pcs
224pcs
9
10 4pcs
2pcs
81pc
6 2pcs
74pcs
Allen Wrench
HELPFUL HINTS
Bolt(6×10mm)
Bolt(6×35mm)
Rubber Feet Sticker
Cam Lock
Cam Bolt
Plastic Lock Strap
Plastic Plug
Anchor Bracket
HOW TO INSTALL THE CAM BOLT AND CAM LOCK
a b c
•A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
•Separate parts before starting.

Page 5 of 8
2
1
3
444
8
4
4
J
J
J
J
G
G
G
F
F
F
44
G
G
FF
4x
28x 1
4x
28x1
4x28x1
Attach L Shape Tube 1 (F) and L Shape Tube 2 (G) to Short Link Tube (J) with Bolt (4) using Allen Wrench (8) separately.
TIP: All the holes for cam bolts should be facing the same direction.
Attach L Shape Tube 1 (F) to L Shape Tube 2 (G) and attach L Shape Tube 2 (G) to L Shape Tube 1 (F) with Bolt (4) using
Allen Wrench (8) as shown in the diagram. Fully tighten bolts.
TIP: All the holes for cam bolts should be facing the same direction.
Attach L Shape Tube 1 (F) to L Shape Tube 2 (G) and attach L Shape Tube 2 (G) to L Shape Tube 1 (F) with Bolt (4) using
Allen Wrench (8) as shown in the diagram. Fully tighten bolts.
TIP: All the holes for cam bolts should be facing the same direction.
J
J
G
F

Page 6 of 8
5
4
44
33
3
8
3
3
K
L
J
J
4
4
3
33
3
6
D
4x
68x 1
3x
44x 28x 1
3x
44x 28x 1
4
4
4
4
4
4
G
G
F
H
F
H
F
G
I
I
H
H
H
H
I
I
I
I
E
1. Attach Left Link Tube (H) to L
Shape Tube 1 (F), attach Right
Link Tub (I) to L Shape Tube 2 (G)
using Allen Wrench (8) as shown
in the diagram. Fully tighten bolts.
2. Attach Left Link Tube (H) to L
Shape Tube 2 (G), attach Right
Link Tub (I) to L Shape Tube 1 (F)
using Allen Wrench (8) as shown
in the diagram. Fully tighten bolts.
TIP: All the holes for cam bolts
should be facing the same
direction.
1. Insert Left Link Tube (H) and Right Link Tube (I) into Front Bottom Frame (K) and Back Bottom Frame (L) as shown in the
diagram.
2. Secure Frames (K or L) and Tubes (H and I) with Bolt (3), secure Frames (K or L) and Short Link Tube (J) with Bolt (4) using
Allen Wrench (8) as shown in the diagram. Fully tighten all the bolts.
Tip: 1. The Bolt holes on the Frames (K and L) and Tubes (H and I) need to be facing the same direction.
2. All the holes for cam bolts should be facing the same direction.
1. Insert Front Upper Frame (D) and Back Upper Frame (E) into Left Link Tube (H) and Left Link Tube (I) as shown in the
diagram.
2. Secure Frames (D or E) and Tubes (H and I ) with Bolt (3), secure Frames (D or E) and L Shape Tube (F or G) with Bolt (4)
using Allen Wrench (8) as shown in the diagram. Fully tighten all the bolts.
Tip: 1. The Bolt holes on the Frames (D and E) and Tubes (H and I ) need to be facing the same direction.
2. All the holes for cam bolts should be facing the same direction.
GF

Page 7 of 8
9
7
8
111
1
1
111
1
2
2
2
2
2
2
222
2
2
2
2
2
22
2
A
A
B
BB
E
L
G
G
F
G
K
D
F
F
A
A
BB
B
1x
24
2x
12
2x
12
Insert Cam Bolt (1) into Assembled Front and Back Frame. Fully tighten using Phillips
screwdriver (not provided).
1. Align Cam Bolt (1) in Back Upper Frame (E), Back Bottom Frame (L), L Shape
Tube 1 (F) and L Shape Tube 2 (G) with the holes in the edge of Large Shelf
Panel (A) and Small Shelf Panel (B) and slide into place.
2. Secure the panels and the Assembled Back Frame together with Cam
Lock (2) using Flat Head screwdriver (not provided).
G
G
F
H
I
F
H
FG
I
E
L
D
K
1. Align Cam Bolt (1) in Front Upper Frame (D), Front Bottom Frame (K),
L Shape Tube 1 (F) and L Shape Tube 2 (G) with the holes in the edge of
Large Shelf Panel (A) and Small Shelf Panel (B) and slide into place.
2. Secure the panels and the Assembled Front Frame together with Cam
Lock (2) using Flat Head screwdriver (not provided).

Page 8 of 8
11
10
K
L
C
C
4
4
10
10
10
10
10
4x48x110 x4
5x
4
6x
2
7x
4
9x
2
E
D
5
5
6
6
6
6
6
7
7
7
7
9
9
step 2
step 1
step 3
step 4
step 6
step 5
E
1. Attach Bottom Metal Leg (C) to the Front Bottom Frame (K) and Back Bottom Frame (L) with Bolt (4) using
Allen Wrench (9). Fully tighten bolts.
2. Attach Rubber Feet Sticker (10) to the bottoms of Bottom Metal Leg (C).
1. Place the assembled Bookcase in the desired
position. Mark where the Bookcase meet the wall.
Remove the Bookcase.
2. Place the Anchor Brackets (6) below the mark
on the wall. Mark the position of the holes in the
Anchor Bracket (6) on the wall.
3. Drill holes in the marked position.
4. Insert the Plastic Plugs (7).
5. Attach the Anchor Bracket (6) to the Plastic
Plugs (7) with Screw (5). Fully tighten screws.
6. Return the Bookcase to the desired position and
attach the Anchor Brackets (6) and Back
Metal Frame together with Plastic Lock Strap (9).
Assembly is now complete.