real living SC-K-152SF/2 User manual

TM
QUAIL HOLLOW SET
OF 2 CHAIRS
ASSEMBLY INSTRUCTION
ITEM#: SC-K-152SF/2
SKU# 810588195
Big Lots Stores, Inc. P.O. Box 28523; Columbus, OH 43228-0523 / Made In China
Need help? We are here for you!
Please email us at
[email protected] for assistance
TM
1

MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
* Determine you have adequate space for assembly from any obstruction, including buildings, tree limbs,
and electrical wires.
* Assembly by two adults is recommended.
* Keep children away during assembly. This item contains small parts which can be swallowed by children. Children
should always be under adult supervision while using this product.
* Always inspect the furniture during each use for any obstructions.
* Do not discard any of the packaging until you have checked that you have all the parts and fittings.
* Retain the assembly instructions for future reference.
* The manufacturer will not accept responsibility for unauthorized repairs or modifications to this product.
Weight limit: 250lbs.
This product is for residential use only, not for commercial use.
Do not stand on product or use as a step ladder.
For optimum safety, use on even surface only!
Improper use of this product or failure to use as directed may result in injury.
* Annually:
* Check all nuts and bolts for tightness each season and more often if used frequently.
* Oil all metal moving parts with a general purpose lubricating oil to ensure proper performance and safety.
* To clean, wash frame and fabric with mild soap and water; rinse thoroughly. Dry frame completely
and allow the fabric to drip dry away from direct sunlight.
* Do not use bleach, acid, or other solvents on the fabric or frame parts.
* To prolong the life of your furniture we recommend storage in a dry area when not in use or during
austere weather conditions.
2

PARTS LIST
HARDWARE LIST
BC
DE
A1
x 2
Right Arm
x 2
Seat
x 2
Back
x 2
Seat Cushion
x 2
Back Cushion
Fa Fc Fd
x 12 + 1 spare
Short Bolt
Fb
x 8 + 1 spare
Long Bolt
x 20
Metal Washer
x 1
Allen Wrench
3
STEP 1
Fc
x 6 x 6
Fa
Attach 1 left arm (A2) to the seat (B) with 3
short bolts (Fa) and 3 metal washers (Fc).
Do not tighten completely.
Repeat procedure for the right arm.
A2
x 2
Left Arm
A2
A1
B
Fa
Fc
A2
B

STEP 2
4
STEP 3
A1
A2
C
Fb Fc
C
Fc
x 4 x 4
Fb
Attach the back (C) to the right arm (A1) with
2 long bolts (Fb) and 2 metal washers (Fc).
Do not tighten completely.
Repeat procedure for the left arm.
Securely tighten all bolts.
Put the cushions (D&E) on the chair frame.
Repeat procedure for the other chair.
E
D