real living CAL-602004 User manual

GENERAL BEST PRACTICES FOR ASSEMBLY:
WARNINGS:
To prevent serious injury or death, this product is equipped with a wall
anchoring system. Before this product can be used, the wall anchoring
system must be installed as directed in the assembly instructions.

CARE AND CLEANING:
MAINTENANCE:
Maximum width of The television: 50 INCH

x1
Top panel
1
x1
Left stand panel
5
x1
Right door
9
x1
2
x1
Right side panelLeft side panel
3
x1
Bottom panel
4
x1
Right stand panel
6
x1
Cross panel
7
x1
Left door
8
PARTS LIST
x2
Back panel
10
x2
Block wood
11
x2
Upper/Under decorative panel
12
x1
Insert stop
13
x2
Left/Right decorative panel
14
x1
Bottom Frame Baffle
15
x4
Shelf panel
16
x1
Upper back panel
18
x2
Door stop
17

x16
Cam-bolts
A
x16
Cam-locks
B
x2
Handle
C
x2
Handle
Φ11*1-1/4"
Φ7*5/8"
Φ7*5/8"
Φ6*1"
Φ8*5/8"
D
x6
Bolts
E
x24
Screws
F
x4
Dowel
G
x1
Allen wrench
H
x16
Screws
J
x16
Shelf supports
K
x4
Hinges
L
x1
Cam-tool
I
x2
Plastic tie
N
x4
Flat head screws
O
x15
Bolts
P
x1
Fireplace insert
M
x4
Anchor
R
x11
Spring washer
S
x11
Flat washer
T
x4
Hook
Q
x14
Screws
U
HARDWARE LIST
Φ8*1-1/2"

STEP 1
Insert 2 Cam-Bolts (A) into Left Stand panel (5) as shown and fully
tighten. Align the cam-Bolts (A) in Left Stand panel (5) with the
holes in Cross panel (7) and Slide into place. Secure in place with
2 Cam-Lock (B) using Cam-Tool (I). Insert 2 Cam-Bolts (A) into Right
Stand panel (5) as shown and fully tighten. Align the Cam-Bolts (A)
in Right Stand panel (6) with the holes in Cross panel (7) and slide
into place. Secure in place with 2 Cam-Lock (B) using Cam-Tool (I).
Attach 2 Door stop (17) to Left/Right Stand panel (5/6)
with 4 screws (J) as shown.
x4
A
7
6
7
5
B
A
I
17
17
J
J
5
A
B
I
x4
B
x4
J

STEP 2
Attach Bottom Frame Baffle (15) to Bottom panel (4)
with 5 Bolt (P), 5 Spring washer (S), 5 Flat washer (T)
as shown. Carefully turn the Bottom panel (4)
upright and insert 4 Cam-Bolt (A) as shown and
fully tighten. Align the Cam-Bolts (A) in Bottom
panel (4) with the holes in the bottom of Left Stand
panel (5) and Right Stand panel (6) as shown and
slide into place. Secure the Stand panels to the
Bottom with 4 Cam-Lock (B) using Cam-Tool (I).
x5
P
x4
B
x5
T
x5
S
x4
A
6
4
B
A
I
5
4
15
H
P
S
T

STEP 3
Insert 4 Cam-Bolt (A) into Bottom panel (4) as shown and fully tighten.
Align the holes in Left Side panel (2) with the Cam-Bolts in Bottom
panel (4) and slide into place as shown.
Secure Left Side panel (2) to Bottom panel with 2 Cam-Lock (B) using
Cam-Tool (I). Repeat this process to install Right Side panel (3).
Slide the 2 Back panel (10) into the grooves of the Left and Right
side panel (2/3) and the Left and Right stand panel (5/6)
as shown in the diagram.
x4
B
x4
A
A
B
3
10
10
3
5
2
6
4
2
I

STEP 4
Insert 4 Cam-Bolt (A) into the holes of Top panel (1)
as shown and fully tighten. Align the Cam-Bolts (A)
in Top panel 1 with the holes in the Left and Right
Stand panels (5/6) and slide into place as shown.
Secure Top panel (1) to the Left and Right Stand
panels (5/6) with 4 Cam-Lock (B) using
Cam-Tool (I). Attach Top panel (1) to Left and
Right side panel (2/3) with 4 Bolt (P), 4 Spring
washer (S), 4 Flat washer (T) as shown.
x4
B
x4
P
x4
T
x4
A
A
TS
P
H
1
3
6
5
2
1
x4
S
B
I

STEP 5
Slide the 4 Dowel (G) into the holes on the Left/Right decorative
panels (14) and align with the holes on the Under/Upper Decorative
panels (12). Secure the panels together with 4 screws (J). Place the
assembled Frame into the cabinet and secure it to Cross panel (7)
and Bottom panel with 4 Screw (J). Attach the assembled frame to
the Left and Right Stand panels (5/6) with 4 Bolt (P) as shown.
x8
J
x4
G
12
12
14
14
G
J
P
J6
5
7
x4
P

STEP 6
Attach 4 Hinges (L) to the Left door (8) and the
Right door (9) with 8 Screws (F). Attach 2
Handles (C) and 2 Handles (D) to the Left and
Right Doors with 6 Bolts (E). Attach the Hinges (L)
of Left door (8) to Side panel (2) with 8 Screws (F).
Attach the Hinges (L) of Right door (9) to Side
panel (3) with 8 Screws (F) and fully tighten all
screws. Insert 16 Shelf Supports (K) into
the middle position holes of the Left and Right
Side panel (2/3) and the Left and Right Stand
panel (5/6) as shown.
x6
E
x4
L
x2
D
x16
K
E
D
E
L
CD
8
K
3
F
8
9
F
9
C
x2
C
x24
F
The Hinge May Be Adjusted If The
Door Gaps Are Uneven

STEP 7
Place 4 Shelf panel (16) onto the Shelf supports as shown. Attach
Upper Back panel (18) to the back of the fireplace with 10 Screws (U)
as shown. Attach 2 Hook (Q) to Top panel (1) with 4 Screw (U).
Attach 2 Block wood (11) to Bottom panel (4) with 4 Screw (J)
as shown. x2
Q
x4
J
x14
U
U
1
Q
U
1
J
11
4
16
16
16
16
18

STEP 8
Place the insert from the back. Attach Insert Stop (13) to Left and
Right Stand panel (5/6) with 2 Bolt (P), 2 Spring washer (S),
2 Flat washer (T) as shown.
x2
P
x1
M
x2
T
x2
S
M
H
P
S
T
6
5
13

STEP 9
Once assembly is complete, Place the fireplace in the desired position
along the wall. With a pencil, lightly mark the location where Hook (Q)
meets the wall. Remove the fireplace away from the wall. Place one
of the remaining Hook (Q) just under the marked location and mark
the hole locations with the pencil. Install the Anchor (R) into the wall
at the marked hole locations. Attach the remaining 2 Hook (Q) using
4 Flat Head Screw (O) to the installed Anchors (R). Fully tighten the
screws. Replace the fireplace back into location. Attach the Hook (Q)
on the wall to the Hook (Q) on the fireplace using the
Plastic Cable Tie (N) as shown.
NOTE: Please insure Fireplace insert is plugged in and working
correctly before securing the two hooks together with the Plastic ties (J).
Printed In Vietnam
x4
O
x2
N
x4
R
x2
Q
R
Q
O
Q
N

WARNING
FOR USE WITH STORAGE WEIGHING_66(30)_LBS(KG) OR LESS.
USE WITH HEAVIER STORAGE MAY RESULT IN INSTABILITY CAUSING
TIP OVER RESULTING IN DEATH OR SERIOUS INJURY.
SHELVE TOP PANEL
MAXIMUM LOAD 20 POUNDS MAXIMUM LOAD 66 POUNDS
LOWER SHELVES
MAXIMUM LOAD 35 POUNDS
BOTTOM PANEL
MAXIMUM LOAD 35 POUNDS
MANFACTURER: CHIN-SHU WOODEN LTD.
MODEL:CAL-602004
DISTRIBUTION: Big Lots Stores, Inc.
ADDRESS: P,O. Box28523;Columbus, OH 43228-0523
COUNTRY OF ORIGIN: Vietnam