real living OAKMONT GB19-516 User manual

STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAY.
SPILLS: Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushion to air dry.
FABRIC CARE: Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.
ALL WEAHTER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water,
rinse thoroughlyand dry completely. Do not use strong detergent or abrasive cleaners. Over time nuts and screws can loosen. Occasinally, check nuts and screws on
the sofa, re-tighten if necessary.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product construction.
Keep assembly area at leat 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safetyprecautions should always be followed to reduce the risk of personal
injury and damage to the product. Please read all instructions before assembly and use.
The sofa is for sitting purpose only, is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
The sofa is not a toy. Sofa tested for use at weight of 350 lb (158.7kg). Improper use of this product or failure to use as directed may result
in injury.Not intended for commercial use.
CARE & MAINTENANCE
DO NOT RETURN THIS PRODUCT TO THE STORE. FOR MISSING PARTS OR QUESTIONS TO THIS PRODUCT PLEASE CALL US AT 1-888-733-8169
OR EMAIL US AT [e-mail] OR [e-mail] OR customerservice_[email protected]
IMPORTANT:
Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, please install all the screws on the product
before fully tighten, and note to put the washer to the screw before putting the screw into the screw hole.
WARNING:
Use the correct screws as indicated. All screws should be hand tight untill the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tight all screws with provided tool.
ASSEMBLY INSTRUCTION
ITEM# GB19-516 / GB19-516-NAVY
SKU# 810414476 / 810460102
OAKMONT TWO SEAT SOFA

NO. Part Qty Image NO. Part Qty Image
A1 Left Arm 1A2 Right Arm 1
BSofa back 1 C Seat Panel 1
DWasher 11 EScrew(φ6x15mm) 8
FScrew(φ6x35mm) 3 G Allen Wrench 1
HSeat Cushion 2 I Back Cushion 2
Do not fully tighen now.
PARTS LIST
STEP 1
Do not fully tighen now.
STEP 2

STEP 4
Do not fully tighen now.
STEP 5
Verify the alignment and adjust, fully tighten all the
screws now. Put seat cushion (H) and back cushion (I)
on the sofa. The sofa is assembled.
STEP 3
Do not fully tighen now.