real living BG-102110 User manual










GENERAL BEST PRACTICES FOR ASSEMBLY:
MAINTENANCE:
CARE AND CLEANING:


WARNINGS:



PARTS LIST
HARDWARE LIST
x2
A
A
x4
A
B
x4
A
C
x1
A
D
x16
A
1
x4
A
2
x4
A
3
x4
A
4
x1
A
11
HELPFUL HINTS
•Separate parts before starting
Bottom Side Frame Upper Side Frame Shelf Top Shelf
x1
A
12
Allen Bolt Phillips Screw Adjuster
Phillips head screw Driver
Allen Bolt
Allen Wrench
A
5
x16
Screw Cap
A
6
x1
x2
A
7
x1
A
8
x1
A
9
x1
A
10
Phillips Screw
Washer Wall Strap Wall Plug Phillips Screw

STEP 1
Assembled View:
STEP 2
Assembled View:
A
2
x4
A
1
x8
A
A
A
BA
4
x4
A
2
A
4
A
C
Insert Adjuster (4) into Bottom Side Frame (A).
Attach Upper Side Frame (B) to Bottom Side Frame (A) with Phillips Screw (2). Fully tighten.
Attach Shelf (C) to Side Frame assembled in Step 1 with Allen Bolt (1).
A
C
A
C
A
C
Please pay attention to
the direction of the metal plate.
A
1

STEP 3
STEP 4
Assembled View:
Assembled View:
A
1
A
1
x8
D
A
3
x4
A
3
Attach the other Side Frame assembled in Step 1 to Shelf (C) with Allen Bolt (1).
A
C
A
C
A
C
A
C
Attach Top Shelf (D) to the Frame assembled in Step 3 with Allen Bolt (3). Fully tighten.

STEP 5
A
5
x16
Assembled View:
A
5
Place Screw Cap (5) onto Allen Bolt (1) and firmly press into place.
A
1
8
FG
A
6
A
7
A
8
A
9
A
10
x1
x2
x1
x1
x1
A
7
A
6
D
To prevent serious injury or death, this product is equipped with a wall anchoring system.
Before this product can be used, the wall anchoring system must be installed as directed
in the assembly instructions.
Attach Wall Strap (8) to Top Shelf (D) with Phillips Screw (6) and Washer (7).
Place the bookcase in the desired position. Mark the wall just below the point where the
Wall Strap (8) meets the wall. Remove the bookcase. Drill a hole at the marked
location and insert Wall Plug (9). Place the bookcase back into position. Secure the bookcase
to the Wall Plug (9) with Phillips Screw (10) and Washer (7). Fully tighten screw.
Assembly is now complete.