real living FAUX H22WK0102-W User manual

TM
FAUX WOOD
ADIRONDACK CHAIR
ASSEMBLY INSTRUCTION
ITEM#: H22WK0102-W
SKU# 810581103
Need help? We are here for you! 1(877)800 – 6021 •Toll Free
[email protected] • Email Address

Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Chair is for sitting purposes only. Standing on or misuse of chair may result in damage or injury.
Not intended for commercial use. Weight limit is 250 lbs (113.5 kg).
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference
PAGE 1 OF 4
Regularly check hardware and tighten if necessary
Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your chair.
In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected
area during off season periods.

PAGE 2 OF 4
PARTS LIST
500 10 20 30 40 60 70 80 90
mm 100
PARTS REQUIRED: 2, 3, 4, 9, 11, & 12
Keep the bolts loose.
x6 x6
9 11
Tools
2
3
4x6
12
STEP 1
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
HKWW629E-BB-FM01
HKWW629E-ZB-FM01
BACK ASSEMBLY
SEAT ASSEMBLY
1 1
1
1
12
3
4
LEFT LEG
RIGHT LEG
LEFT ARM
HKWW629E-ZJG-FM01
HKWW629E-YJG-FM01
1
HKWW629E-ZSB-FM01
5
BOLT M6*40
8
10
2
LS-M6-40-Y3
9
LS-M6-45-Y3 2
BOLT M6*45
7
2
LS-M6-60-Y3
BOLT M6*60
LS-M6-55-Y3 6
BOLT M6*55
WASHER d6.5*D13*1.0
DP-d6.5-D13-Y3 811
12
RIGHT ARM
1
HKWW629E-YSB-FM01
68
LM-M6-Y3
JAM NUT M6*1.0
9
11
12
L
R
Note:
The labels marked “L” and “R” on the legs (#3 and #4)
should coincide with Step 1 to ensure proper assembly.

PARTS REQUIRED: 1, 2, 5, 6, 7, & 8
Tighten all bolts by using the supplied Hex key.
x2 x2
7 8
8
7
1
5
6
2
PAGE 3 OF 4
STEP 3
STEP 2
3
4
PARTS REQUIRED: 3, 4, 5, 6, 10, 11, & 12
Keep the bolts loose.
5
6
10 11 12
x2 x2
10 11
x2
12
L
R
Note:
The labels marked “L” and “R” on the arms (#5 and #6)
should coincide with Step 2 to ensure proper assembly.

PAGE 4 OF 4
STEP 4
Warranty
•One–year limited warranty.
•Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from the service center.
The store where you made your purchase does not stock parts for this item.
If you need parts, whether they are missing or damaged,
STOP!
Missing A Part? No Need To Go Back To The Store
Call us between 9:00 AM and 4:30 PM Eastern Time Monday through Friday
For further assistance, please visit us at [email protected]
Call Toll Free:
TEL: [phone]