real living TAUPE BG-102111 User manual

TAUPE










GENERAL BEST PRACTICES FOR ASSEMBLY:
MAINTENANCE:
CARE AND CLEANING:


WARNINGS:



PARTS LIST
x1
A
A
x1
A
B
x2
A
C
x1
A
D
x1
A
E
x1
A
F
x1
A
G
x1
A
H
x1
A
I
x1
A
J
x1
A
K
x1
A
L
x1 x1
A
N
A
M
Top Panel Back Panel Side Frame
Left Front Panel Right Front Panel
Drawer Front Drawer Left Drawer Right Drawer Back
Drawer Bottom
x1
A
O
Support Tube
Left Panel Left Middle Panel
Right Middle Panel Right Panel

HARDWARE LIST
x2
A
1
x20
A
2
x20
A
3
x8
A
4
x2
A
5
HELPFUL HINTS
•Separate parts before starting
HOW TO INSTALL CAM LOCK
x2
A
6
x8
A
7
x14
A
8
x2
A
9
x2
A
10
x2
A
11
x1
A
12
x8
A
13
x4
A
14
x1
A
16
Place the other panel over the panel with the bolt,
then insert the cam lock to join the bolt’s head.
Alignment: The cross
points towards the panel
with the bolt.
Turn the cam lock clockwise.
Slider Cam Bolt Cam Lock Wood Dowel Allen Screw
Allen Screw Phillips Screw
Allen Wrench
Drawer Connector Handle Adjuster
x1
A
17
Phillips head screw Driver
Phillips Screw Phillips Screw Phillips Screw
Allen Screw
x8
A
15
Screw Cap

STEP 1
Assembled View:
STEP 2
Assembled View:
A
1
A
7
x1
x2
A
1
A
7
x1
x2
A
N
A
F
A
1
1-1
1-2 A
7
2-1
2-2
Attach front of Slider (1) to Right Middle Panel (N) with Phillips Screw (7) and fully tighten.
Attach back of Slider (1) to Right Middle Panel (N) with Phillips Screw (7) and fully tighten.
A
7
Attach front of Slider (1) to Left Middle Panel (F) with Phillips Screw (7) and fully tighten.
Attach back of Slider (1) to Left Middle Panel (F) with Phillips Screw (7) and fully tighten.
1
A
7
A
7
Note: The front of the slider is the end
with two bigger holes.
Note: The front of the slider is the end
with two bigger holes.

STEP 3
STEP 4
Assembled View:
Assembled View:
x8
x8
A
2
A
3
2
2
H
G
Insert Cam Bolt (2) into Left Front Panel (G) and Right Front Panel (H) and fully tighten.
Align Cam Bolt (2) in Left Front Panel (G) with the holes in Left Panel (E) and Left Middle Panel (F) as shown in the
diagram and slide together. Secure Left Panel (E) and Left Middle Panel (F) to Left Front Panel (G) with Cam
Lock (3) and fully tighten.
Align Cam Bolt (2) in Right Front Panel (H) with holes in Right Middle Panel (N) and Right Panel (O) as shown in the
diagram and slide together. Secure Right Middle Panel (N) and Right Panel (O) to Right Front Panel (H) with Cam
Lock (3) and fully tighten.
3
N
O
H
3
E
F
G
A
2
A
2

STEP 5
STEP 6
Assembled View:
Assembled View:
x8
x2
A
8
A
6
Align the holes of Back Panel (B) with the holes of Left Panel (E), Left Middle Panel (F), Right Middle Panel (N) and
Right Panel (O), secure the panels together with Phillips Screw (8). Fully tighten Phillips Screw (8).
Attach Support Tube (D) to Left Middle Panel (F) and Right Middle Panel (N) with Phillips Screw (8).
Attach Support Tube (D) to Left Panel (E) and Right Panel (O) with Allen Screw (6). Fully tighten.
8
8
E
F
N
O
B
D
E
F
N
O
8
8
6
6
x2
A
8

STEP 7
2PCS
STEP 8
Assembled View:
Assembled View:
A
14
x4
A
13
x8
Insert Adjuster (14) into Side Frame (C).
Attach Side Frame (C) to Back Panel (B), Left Front Panel (G) and Right Front Panel (H) with Allen Screw (13).
C
B
G
C
H
C
14
13
13

STEP 9
STEP 10
Assembled View:
A
2
x12
x12
A
3
A
4
x8
Assembled View:
Insert Cam Bolt (2) into Top Panel (A) and fully tighten.
Insert Wood Dowel (4) into Top Panel (A) as shown in the diagram.
With assistance, carefully align the holes in the assembled base with Cam Bolt (2) in Top Panel (A) and lower into place.
Secure Top Panel (A) to Left Panel (E), Left Middle Panel (F), Right Middle Panel (N), Right Panel (O), Back Panel (B),
Left Front Panel (G) and Right Front Panel (H) with Cam Lock (3). Fully tighten Cam Lock (3).
A
4
2
B
A
O
H
G
N
F
E
3

STEP 11
STEP 12
Assembled View:
A
8
x4
A
7
A
11
x2 x4
A
11
A
J
A
K
A
L
A
M
A
8
A
7
Assembled View:
Attach Drawer Connector (11) to Drawer Left (J) and Drawer Right (K) with Phillips Screw (7)
and fully tighten. Attach Drawer Left (J) and Drawer Right (K) to Drawer Back (L) with Phillips
Screw (8) and fully tighten as shown in the diagram.
Slide Drawer Bottom (M) into Drawer Left (J), Drawer Right (K) and Drawer Back (L).
J
K
A
L

STEP 13
STEP 14
Assembled View:
Assembled View:
14-1
14-2
A
9
x2
E
5
A
12
x1 x2
Attach Handle (12) to Drawer Front (I) with Phillips Screw (9) and fully tighten.
Attach Drawer Front (I) to Drawer Left (J) and Drawer Right (K) with Allen Screw (5) and
fully tighten.
J
Slide assembled drawer into sliders.
12
A
9
A
I
5
K

STEP 15
A
10
x2
Pull sliders out to front of drawer and secure in place with Phillips Screw (10) and fully tighten.
Assembled View:
STEP 16
A
10
Place Screw Cap (18) onto Allen Bolt (13) and firmly press into place.
Assembly is now complete. A
18
x8
Assembled View:
A
18
13