real living BL20201103-1WH User manual

LEG

Insert Wood Dowel (5) into the
nonthreaded holes in the ends
of Cross Bar (C). Align the holes
in Legs (B) with the Wood Dowel
(5) in Cross Bar (C) and slide into
place. Secure Legs (B) to Cross Bar
(C) with Bolt (1) using Wrench (6).
Fully tighten bolts.

Insert Wood Dowel (5) into the
center holes in Base (D) as shown.
Align the center holes in Legs (B)
with the wood Dowel (5) in Base (D)
and slide into place. Secure Legs
(B) to Base (D) with Bolt (1) using
Wrench (6). Fully tighten bolts.

With assistance from another adult,
Align the holes at the top of Leg (B)
with the threaded holes in the side of
Mirror (A). Secure Mirror (A) to Leg (B)
with Bolt (4). Do not over tighten bolts.

Align the ends of the bottom supports
for Mirror (A) with the threaded holes
in Leg (B). Secure the supports to the
Leg (B) with Bolt (2) using Wrench (6).

Attach Knob (8) to the door
of Mirror (A) with Bolt (7) using
Wrench (6). Assembly is now
complete.