real living BQ092-1702AC User manual

l i v i n gTM
ONE DRAWER DESK
ASSEMBLY INSTRUCTIONS
ITEM#:BQ092-1702AC/BQ092-1702WH/BQ092-1702BK
SKU#:810529561/810529568/810529569

Page 2 of 8
Read all instructions before starting
Clear a flat covered space to begin
Two adults are recommended for assembly
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its number in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Regularlycheck hardware and tighten if necessary.
Use dry cloth to wipe surfaces.
Keeping Away from water and fire.
SUGGEST 2ADULTSTO ASSEMBLE THIS PRODUCT IN AN OPEN AREA.
DO NOT USE POWER TOOLSTO ASSEMBLE

Page 3 of 8
NO QTY DESCRIPTION
A 1pc
B1pc
C1pc
D1pc
E1pc
F 1pc
G 1pc
PARTS LIST
Top Panel
Left Side Panel
Right Side Panel
Under Top Bar
Left Front Panel
Right Front Panel
Left Divider
H1pc
I 1pc
J 1pc
Right Divider
Back Panel
Bottom Support Panel
K2pcs Back Slat
L1pc Back Bottom Slat
M1pc Drawer Front Panel
N1pc Drawer Back Panel
O1pc Drawer Left Side Panel
P1pc Drawer Right Side Panel
Q1pc Drawer Bottom Panel
A
F
G
H
I
J
K
K
L
M
O
NP
B
C
D
E
Q
R
S
S

Page 4 of 8
Wooden Dowel
312pcs
Cam Lock
Cam Bolt
NO QTYPARTS DESCRIPTION
1 23pcs
223pcs
HARDWARE LIST
NO QTY DESCRIPTION
S2pcs
PARTS LIST
Glider
R1pc Drawer Handle
Rubber Feet Sticker
Nut
14
4pcs
10pcs PVC Sticker
Screw(4×35mm)
Screw(4×25mm)
Screw(4×55mm)
2pcs
10pcs
8
9
10 10pcs
11 10pcs
Bolt(6×55mm)
12
13
1pc
Screw(3×12mm)
4
5
6
2pcs
6pcs
1pc
2pcs
7
Bolt
Bolt
Allen Wrench

Page 5 of 8
44
44444
3
3
3
3
3
3
8
8
8
4
HOW TO INSTALL THE CAM BOLT AND CAM LOCK
a b c
8x2
HELPFUL HINTS
•A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
• Saperate all parts before starting
3x2
3
Important: Press a nut into the hole
in the part, making sure the “-“ pattern
is facing up.
!
Important: Using a standard screw
driver, turn the nut until the “-” is
inline with the hole for the bolt.
!
HOW TO INSTALL NUTS
8x2
23x4
4x6
1
8
G
G
G
H
H
H
S
S
I
J
Spreading the Glider (S), attach the Glider (S) onto the Left Divider (G) and Right Divider (H)
with Screws (4). Fully tighten all the Screws.
Please note the orientation of the glider in the diagram.
S
4 4 4
1. Insert Wooden Dowel (3) into the end of Left
Divider (G) and Right Divider (H) .
2. Align the Wooden Dowels (3) in the end of Left
Divider (G) and Right Divider (H) with the holes in
the Back Panel (I) and slide into place.
3. Secure the panels together with Screws (8).
1. Insert Wooden Dowel (3) into the end of Left
Divider (G) and Right Divider (H) .
2. Align the Wooden Dowels (3) in the end of Left
Divider (G) and Right Divider (H) with the holes in
the Bottom Support Panel (J) and slide into place.
3. Secure the panels together with Screws (8).

11
11
11
11
1
1
11
11
3
32
2
8
52x
4
1x
2
Page 6 of 8
6
4
1x
4
3x
2
11 x
10
7
8x2
3x49x2
11
G
G
H
H
I
J
J
F
F
E
E
88
9
9
3
3
3
3
K
G
H
I
I
K
K
K
L
L
F
E
B
C
Insert Cam Bolt (1) into Left Front Panel (E) and Right Front Panel (F).
Fully tighten.
1. Insert Wooden Dowel (3) into the end of Left Divider (G)
and Right Divider (H) .
2. Align the Cam Bolts (1) in Left Front Panel (E) and Right
Front Panel (F) with the holes in the edge of Left Divider (G)
and Right Divider (H) and slide into place.
3. Secure the panels together using Cam Lock (2).
1. Insert Wooden Dowel (3) into the end of Back Slat (K).
2. Align the Wooden Dowels (3) in the end of Back Slat (K) with
the holes in the Back Panel (I) and slide into place.
3. Secure the panels together with Screws (8).
4. Insert Wooden Dowel (3) into the other end of Back Slat (K).
5. Align the Wooden Dowels (3) in the end of Back Slat (K) with
the holes in the Back Bottom Slat (L) and slide into place.
6. Secure the panels together with Screws (9).
Insert Cam Bolt (1) into Left Side
Panel (B) and Right Side Panel (C).
Fully tighten.
Insert Nut (11) into the holes of Back
Panel (I), Back Bottom Slat (L), Left Front
Panel (E) and Right Front Panel (F).
TIP: The line on top of Nut (11) must be in
line with the bolt.

Page 7 of 8
10
10
10
10
10
10
10
11
13
12
2x 15 13 x 4
10 10 x 5
E
910 x512 x 1
7
7
1
11
11
2
2
2
2
2
1x
13
7x 2
12 x 1
A
D
13
13
13
13
13
G
H
F
E
I
B
C
A
G
H
F
I
B
C
A
D
B
C
I
I
LL
J
J
10
12
12
E
E
F
Secure the Left Side Panel (B) to Back Panel (I), Back Bottom
Slat (L), and Left Front Panel (E) with Allen Bolt (10) using
Allen Wrench (12).
Secure the Right Side Panel (C) to Back Panel (I), Back Bottom
Slat (L), and Right Front Panel (F) with Allen Bolt (10) using Allen
Wrench (12).
1. Secure the Under Top Bar to the Top Panel (A) with
Screws (7). Fully tighten.
2. Insert Cam Bolt (1) into Top Panel (A). Fully tighten.
With assistance, lift the assembled base from Step 10
and align the holes in the edge of Left Side Panel (B),
Right Side Panel (C), Back Panel (I), Left Front Panel (E)
and Right Front Panel (F) with the Cam Bolts in Top
Panel (A) and slide into place.
1. Secure the panels together using Cam Lock (2).
2. Apply the Rubber Feet Sticker (13) to the bottom of each leg.

Page 8 of 8
6
6
1
2
2
22
1
11
14
14
14
14
14
14
14 8x
4
14
14
R
17
16
15
1x 4
2x 4
6x 1
5x 2
8
8
8
8
M
M
O
OO
O
NP
P
P
P
Q
Q
R
14 x 10
5
5
5M
Align the Drawer Left Side Panel (O) with the Drawer Back Panel (N) and secure in place with Screw (8).
Fully tighten screws. Repeat process for Drawer Right Side Panel (P).
Note: Make sure the grooves in all panels are aligned.
1. Insert Cam Bolt (1) into Drawer Front Panel (M) and fully tighten.
2. Attach the Drawer Handle (R) to the Drawer Front Panel (M) with Bolt (6).
Fully Tighten.
1. Slide the Drawer Bottom Panel (Q) into the grooves of Drawer Left Side Panel (O) and Drawer
Right Side Panel (P) until it is fully inserted into the groove of Drawer Back Panel (N).
2. Align the Cam Bolts in Drawer Front Panel (M) with the holes in Drawer Left Side Panel (O) and
Drawer Right Side Panel (P) and slide into place until Drawer Bottom Panel (Q) is fully inserted
into the groove.
3. Secure the panels together with Cam Lock (2).
NN
1. Slide the completed Drawer in Step 17 into
desk.
Note: the end of active side of the Glider (S)
should be tight against the Front of the
Drawer Left Side Panel (O) and Drawer
Right Side Panel (P).
2. Attach the Drawer Left Side Panel (O) and
Glider (S), Drawer Right Side Panel (P) and
Glider (S) with Bolt (5). Fully Tighten.
3. Cover the visible bolts in the side panels
with PVC Sticker (14).
Assembly is now complete