real living A222015500 User manual

TM
2PK AW WICKER WINE BAR STOOLS
ASSEMBLY INSTRUCTIONS
ITEM#: A222015500
SKU#:810497082
Need help? We are here for you! 1(866)578 – 6569 24/7 • Toll Free

WARRANTY:
WARNINGS:
MAINTENANCE
GENERAL BEST PRACTICES FOR ASSEMBLY:
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
•Please read and understand this entire manualbefore attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Stool is for sitting purpose only. Standing on or misuse of stool may result in damage or injury. Not intended for commercial use.
• WEIGHT LIMIT 250 LBS(113KG).
• Keep all children and pets away from assembly area.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Before using, clean the Stool completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
•When not in use, store in a cool, dry area and for best results always cover the chair with an outdoor cover.
2/7

EXPLODED DRAWING
3/7

PARTS LIST
HARDWARE LIST
Label Part Number Description Qty Part Image
A P001600060 Seat 1
B P005400529 Leg4
C Fixed Frame 1
D P005300057
P005000319
Foot pad
Pre-assembled 4
E P005300023 Foot pad
Pre-assembled 4
Label Part Number Description Qty Add Part Image
H1
H2
H3
HW
H010010003 Bolt M6*15 8 1
H010010004 Bolt M6*35 4 1
1 0
H050010025 Flat washer
Wrench M6
M6 12 2
H090010017
4/7

HELPFUL HINTS
• Separating parts before starting
How many people needed for the installation
Provided in hardware pack
5/7

STEP 1
Assembled View:
4x
1x
4x4x
6/7
Attached Leg(B) to the Fixed
Frame(C) with Bolt H2 and Flat
Washer H3, tighten the Bolt H2 to
80% depth with Wrench(HW).

STEP 2
Assembled View:
4x
1x
4x
7/7
Attached Seat(A) to Leg(B) with
Bolt H1 and Flat Washer H3,
tighten all the Bolt to 100% depth
with Wrench(HW) at last.