INTRODUCTION
SONY CYBER-SHOT DSC-RX100 III Waterproof Housing WHS-RX100Mk III
※Thank you for purchasing the WHS-RX100Mk III Waterproof Housing.
※ To ensure proper and safe use, please thoroughly read this manual.
※ Improper use may cause leakage causing irreparable damage to your digital camera.
※ Please check, and test the housing according to this manual prior to use.
※Neither NTF Corporation, Seatool/Resea nor their agents shall warrant or bear any
responsibility for any incident related to water leakage, damage or loss of data,
unauthorized modification, disassembly and repair; or any accident causing physical or
material damage while using this product.
※This product is manufactured by machining methods. s a result, there may be minor
scratching or tool marks. These are a normal part of the manufacturing process, do not
effect operation of the housing or camera, and are not subject to warranty or any other
claims.
W RNING!
※ Do not store or leave housing in reach of infants or small children. The strap may cause
chocking and suffocation, or small parts may be swallowed causing injury.
※Please remove digital camera from housing when not in use. Battery malfunction or
damage may cause fire.
※The housing body is made of corrosion-resistant aluminum. However, saltwater can cause
rusting so be sure to rinse thoroughly using fresh water without fail.
C UTION!
※ To prevent water leakage and damage, DO NOT disassemble or modify this housing.
※ Do not store the housing in areas of high humidity, high or low temperatures, or areas of
extreme temperature fluctuation. Doing so may cause deterioration of parts.
※ When diving, use a method of water entry that protects the housing from shock, which can
cause water leakage. If at all possible have housing handed to you after entering the
water.
※ This housing is designed to withstand depths of 100 meters (328 feet). Using the housing
at deeper depths may cause damage and water leakage. Use caution and monitor depth.
※Remove O-ring or leave housing slightly open when transporting by plane. Pressurization
of a sealed housing during transport may cause damage or make it difficult to open.
※ When opening and closing the housing be mindful of dust and other contaminants, which
may adhere to the to the O-ring, possibly causing water leakage and damage.
※ lways check O-ring prior to each use. Pay special attention to the grease condition and
that the O-ring is seated uniformly in the O-ring groove with no twists or bulges. Neglecting
to check the O-ring prior to each use may result in water leakage and damage.
FE TURES OF THIS PRODUCT
※Compact and durable, CNC precision machined corrosion-resistant aluminum housing.
※Lightweight, ergonomically designed.
※Maximum Operating Depth (MOD) of 100 meters (328 feet).
※Fixed Lens Port.
※Half-Press Shutter Trigger for precise camera shutter control.
※Front Port Control Ring and Rear Control Dial with push-button function.
※Original Secure-Latch locking mechanism for easy opening and closing.
※Quality silicone O-ring with wider Back Cover contact surface for added protection at
greater depths.
※Complete camera function control.
※Wide variety of supported RECSE original options.
1
