Redgum BASICS B4204S User manual

redgumbrand.com.au
USER MANUAL
Please read and keep these instrucons
SEAT
WALKER
B4204S

redgumbrand.com.au
BASICS by Redgum owns the copyright to the Seat Walker user manual.
Any informaon contained in this user manual shall not be photocopied, reproduced or
translated into any other languages without the prior wrien consent of BASICS by Redgum.
BASICS by Redgum strives to provide the highest quality products possible.
Product is subject to change without noce.
© Copyright BASICS by Redgum 2021
BASICS by Redgum is part of FOR-DE Group Pty Ltd

redgumbrand.com.au
CONTENTS
1. INTRODUCTION - INTENDED USE
2. PRODUCT OVERVIEW - FEATURES / SPECIFICATIONS
3. SET UP - UNPACK and INSPECT SUPPLIED PARTS
4. ASSEMBLY - UNFOLD FRAME
5. ASSEMBLY - INSTALL HANDLES
6. ASSEMBLY - INSTALL HANDLES (connued)
7. ASSEMBLY - INSTALL PADDED BACKREST
8. SET UP - HANDLE HEIGHT ADJUSTMENT
9. OPERATION - HAND BRAKES
10. OPERATION - HAND BRAKE ADJUSTMENT
11. OPERATION - FOLDING SEAT WALKER
12. USAGE GUIDELINES - DO’s + DON’Ts
13. PRODUCT CARE - INSPECTIONS / CLEANING
14. WARRANTY
15. BASICS by Redgum - PRODUCT RANGE
16. NOTES

redgumbrand.com.au
INTRODUCTION
Thank you for purchasing this quality BASICS by Redgum product.
If you have any issues or quesons about the Seat Walker
please contact your supplier or BASICS by Redgum direct:
T: [phone]
E: [e-mail]
A: 1 Business Way, Malaga Western Australia 6090
INTENDED USE
This product has limitaons and should be used in accordance to these guidelines.
Failure to follow these guidelines may result in damage to the product and injury to
the user. It is the responsibility of the user to ensure the suitability of this product
for its intended use. The user should consult their appropriate healthcare professional
if unsure of the correct product usage for their unique circumstances.
Only use the Seat Walker for its
intended purpose which is as
stability aid on which to lean on
for support to maintain balance
whilst standing or walking.
Refer to usage guideline page for
informaon on how to use the
Seat Walker in a safe manner.
IMPORTANT NOTE
This equipment MUST
be set up for use by a
competent person.
1.

redgumbrand.com.au
PRODUCT OVERVIEW
FEATURES
Great walking aid
User friendly loop brakes
Height adjustable handles
Ergonomic handgrips to reduce pressure
Comfortable padded seat
Storage bag underneath seat.
Padded backrest
Simple brake cable adjustment
Large diameter wheels for excellent mobility
Flat free tyres
Swivelling front wheels
Folds up for transit or storage
SPECIFICATIONS (All dimensions shown are nominal)
Overall Width: 620mm
Depth Unfolded: 650mm
Depth Folded: 230mm (with handles removed)
Overall Height: 840mm (handles at lowest seng)
Handle Height: 840 - 990mm (8 sengs)
Seat: 360mm (W) x 310mm (D)
Seat Height: 570mm (from oor to top of seat)
Wheel Diameter: Ø200mm / 8”
Product Weight: 8.7kg
Maximum User Weight: 136kg
Please contact BASICS by Redgum if you would like any further informaon
on the Seat Walker .
2.

redgumbrand.com.au
SET UP- UNPACK and INSPECT SUPPLIED PARTS
Ensure you have been supplied with the following parts:
We recommend that you visually
inspect the Seat Walker
parts prior to assembly:
3.
IMPORTANT NOTE:
If you see any damage
suspect a fault
or parts are missing
DO NOT ASSEMBLE THE PRODUCT
and contact your supplier for support.
BACKREST
(x1)
FRAME
(x1)
HANDLES
(1 x LEFT)
(1 x RIGHT)

redgumbrand.com.au
4.
ASSEMBLY- UNFOLD FRAME
Please follow these steps to unfold the
Seat Walker frame correctly:
1. Posion the Seat Walker so all four wheels
are touching the ground.
2. Push down and pull out on the cross bars
as shown to open up the frame.
3. Press down on the outer leg braces to
ensure frame has fully opened out.
4. Gently lower seat down onto cross tube.
Leg braces

redgumbrand.com.au
ASSEMBLY- INSTALL HANDLES
Please follow these steps to install the handles
onto the Seat Walker correctly:
1. Undo the handwheel and remove the
saddle washer and bolt from frame.
IMPORTANT NOTE
The handles are le and right handed
and need to be ed to the correct
side of frame. Ensure the brake lever
is facing outwards.
2. Slide handle down into open tube
on frame.
Refer to next page for further instrucon...
5.
Bolt
Slide handle
down into tube
on frame
Saddle
Washer
Hand
wheel
Brake lever
facing outwards

redgumbrand.com.au
6.
ASSEMBLY- INSTALL HANDLES (connued)
3. Posion handle to the required height seng.
by aligning holes in handle and frame. (Refer to page 8.)
4. Insert the bolt through the
hex hole in the frame. Line
up bolt head with hex hole.
5. Fit saddle washer
onto bolt with the
curved face
toward frame.
6. Screw handwheel
onto bolt to x
handle into posion.
7. Repeat process to t other handle.
Line up
bolt head
with
hex hole
Aach brake
cables to
plasc clips
on rear legs
of Seat Walker
to keep cables
in place.

redgumbrand.com.au
ASSEMBLY- INSTALL PADDED BACKREST
Please follow these steps to install the padded backrest correctly onto the Seat Walker:
1. Line up the tubes
on the padded
backrest with
the pivot brackets
on the frame.
2. Push the backrest tubes
into the pivot brackets
3. Press in both large
buons on either side
of the backrest and
connue to slide the
backrest tubes into
the pivot brackets.
4. Connue to push the
backrest in unl you
hear 2 audible “CLICKS”.
These clicking sounds
conrm that the
backrest is properly
ed to the Seat Walker.
7.
Large
buon

redgumbrand.com.au
Refer to page 6. for
informaon on how
to set handle height
SET UP - HANDLE HEIGHT ADJUSTMENT
It is very important that the handles on the Seat Walker are set to the correct height to
suit the user. Follow these steps to set the handle height to provide the best support:
1. Stand behind the walker with your shoulders relaxed
and your arms hanging loosely at your sides.
2. The height of the handles should be adjusted so that they
are level with your wrists. This will posion the arms at the
recommended 20 degree bend in the elbow when using
the Seat Walker.
8.
Handles should be set
at same height as your
wrists when standing
behind Seat Walker.

redgumbrand.com.au
OPERATION - HAND BRAKES
The Seat Walker has closed loop
hand brakes on both handles.
IMPORTANT NOTE
Both hand brakes should be used
simultaneously to ensure your
seat walker stops as required and
you are in control.
To STOP, gently pull upwards
on both brakes simultaneously.
This will slow down and stop
the seat walker.
Release both brakes to
allow the seat walker
to become mobile again.
The brakes on your seat walker
also have a park brake opon.
To engage the park brake:
Push downwards on both brakes
simultaneously. Push the brakes
down unl you hear a click.
To unlock, simply pull the brakes
up. You will hear a click as the
‘park lock’ disengages.
9.

redgumbrand.com.au
OPERATION - HAND BRAKE ADJUSTMENT
The Seat Walker brake system might require adjustment
from me to me.
Adjustment is required when either the brake
or park brake no longer stops the rear wheel
from spinning.
To adjust the brake:
1. Carefully release the locking screw using
a suitable allen key (not supplied).
2. Adjust the brake arms unl it clear
the wheel by approx. 3 mm.
3. Re-posion the locking boss to be
hard up against the brake body.
4. Reghten the locking screw.
5. Check the brake to ensure the wheel
stops spinning when the brake is on.
6. Repeat the brake adjustment
procedure if required unl
brakes work as required.
10.
Locking
Boss
Locking
Screw
3mm GAP

redgumbrand.com.au
OPERATION - FOLDING SEAT WALKER
Your Seat Walker can be folded up to
reduce the amount of room it takes
up when being transported or stored.
Please follow these steps to fold
the Seat Walker correctly:
1. Rotate the padded backrest up.
2. Rotate the padded seat up.
3. Pull up on the fabric strap.
As you pull up, the frame will start
to come together.
Refer to page 4. to unfold frame
properly.
11.
Take care when Seat Walker is in the folded
posion as it will fall over if not supported
or laid down.

redgumbrand.com.au
USAGE GUIDELINES - DO’s + DON’TS
Please follow these guidelines to get the opmal
benet from the Seat Walker.
Failure to follow these guidelines may
result in damage to the Seat Walker
and put the user at risk.
The Seat Walker is designed to take
136kg Maximum Load.
Do not overload the product!
Do not overload the storage bag under seat.
(Max. load: 5kg)
The Seat Walker is designed to be used indoors and outdoors.
Periodically inspect to the Seat Walker prior to use to ensure it is in good working order.
(Refer to page 9)
Always check that brakes are working prior to using the Seat Walker.
Take care when using the Seat Walker on uneven or wet ground.
Never self propel the Seat Walker while seated. (The Seat Walker is not a wheelchair)
Always adjust the handles to the correct height to suit the user.
(Refer to page 8)
Take care when Seat Walker is in the folded posion as it will fall over if not supported
or laid down.
Never hang any objects o the side of the Seat Walker as it may p over.
Ensure all four legs remain in contact with the ground when the Seat Walker is in use.
Do not lean too far to one side or lean backwards causing the legs to leave the ground.
If you have any issues or quesons about the Seat Walker please contact your supplier
or BASICS by Redgum direct.
12.

redgumbrand.com.au
13.
PRODUCT CARE - INSPECTIONS / CLEANING
INSPECTIONS
We suggest that the Seat Walker is visually checked periodically for signs
of damage or wear prior to use. Overall check the following:
- Frame has no distoron.
- Plasc components (brakes / handgrips etc) are not damaged or cracked.
- Brakes work as required. (Refer to page 10. for brake adjustment informaon)
- Seat is not damaged or split.
- Wheels are not damaged and spin freely (remove any hair or lint).
Withdraw the Seat Walker immediately if you suspect
damage or any other fault. If in any doubt, please do not issue or use,
but immediately contact your supplier for service support.
CLEANING
Clean the Seat Walker using a
non-abrasive cleaner or mild
detergent with a so cloth.
Abrasive cleaners or abrasive
cleaning pads could damage the
Seat Walker and should not
be used.
If you have any issues or quesons
about the Seat Walker
please contact your supplier or
BASICS by Redgum direct.

redgumbrand.com.au
14.
WARRANTY
The BASICS by Redgum:
B4204S - SEAT WALKER
is covered by a 12 Month Warranty from the date of purchase.
If the product has any manufacturing faults during this period contact the place of
purchase for assessment. Failures as a result of ACCIDENTAL MISUSE, MODIFICATION
OR WEAR AND TEAR ARE NOT COVERED BY THIS WARRANTY.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entled to a replacement part for a major failure and for
compensaon for any other reasonably foreseeable loss or damage. You are entled
to have the goods repaired or replaced if the goods fail to be of acceptable quality
and failure does not amount to major failure.
If you have any issues or quesons about the Seat Walker
please contact your supplier or BASICS by Redgum direct on:
T: [phone]
E: [e-mail]
A: 1 Business Way, Malaga
Western Australia 6090
Please keep this
User Manual
in a safe place
for future reference.

redgumbrand.com.au
15.
BASICS by Redum - PRODUCT RANGE
BASICS by Redgum oer a range of products including:
Please contact BASICS by Redgum for further informaon:
T: [phone] E: [e-mail]
A: 1 Business Way, Malaga Western Australia 6090
W: www.redgumbrand.com.au
Step
B68H
Step with handle
B68SH
Walking frame
with 5” wheels / rear glides
B4070WS
Bedside commode
B580
Bariatric commode chair
B588

redgumbrand.com.au
NOTES
16.

redgumbrand.com.au
DISTRIBUTOR:
Proudly Australian Owned and Operated