Redgum SE95036 User manual

User guide for Seat Walkers
SE95035 - 100kg Maximum User Capacity
SE95036 - 100kg Maximum User Capacity
SE95074 - 100kg Maximum User Capacity
WARNING
DO NOT USE THIS WALKER AS A WHEELCHAIR OR TRANSPORT CHAIR.
NOT TO BE OPERATE ON ESCALTORS OR STAIRCASES.
ONLY USE THE SEAT WHEN THE WALKER IS STATIONARY.
DO NOT SIT AND PUSH WALKER WITH YOUR FEET
Warranty
1. REDGUM warrants their range of seat walkers for a period of 12 months from the date
of purchase. (You must provide proof of purchase when claiming warranty)
2. REDGUM must inspect the product within the warranty period. Redgum is not liable for
any return freight costs of non conforming products.
3. REDGUM’s warranty doesn’t include product damaged accidentally through misuse or
neglect.
4. REDGUM will not warrant any products that have been modified in any form.
5. All issue’s relating to warranty Must be referred to the place of purchase, where the
Dealer will place an official warranty claim to Redgum.
6. Regular checks to ensure all nut and bolts are tight is recommended .
Contents of Each Box
# 1 x User Guide
# 1 x Seat Walker Frame
# 2 x Handles
# 2 x Hexagonal Head Bolts & Black Plastic Hand Adjusting Nuts
# 1 x Backrest (SE95036S & SE95074 models only) needs to be fitted

Assembly Instructions
1. Insert handles in to the frame and place the hexagonal bolt in to the bolt hole in the frame
at the appropriate height to the User.
2. From the outside of the frame attach and tighten the Black Plastic Hand Adjusting Nut on to
the Hexagonal Head Bolt.
3. The carry bag has already been installed.
4. Fit the Backrest securely using the Bolts & Tool supplied.
SE95036 / SE95074 SE95035
HOW TO SIT DOWN
1. To sit down on Models SE95036/SE95077 please ensure the locking hand brake is in the locked
position(gently push the brake handle down to activate)
2. Do not support your total body weight on the handles, push down gently when sitting, on the push-
down brake model SE95035.
3. Keeping in contact with the handles (not the brake levers), turn around and make contact with the seat
front with the back of your legs.
4. Slowly lower yourself on to the seat.
5. Now in the sitting position evenly distribute your body weight. Do not lean to one side or you may
affect the walkers balance.
Moving with your Seat Walker
1. Place your Seat Walker so that its rear wheels are a few centimetres in front of your feet.
2. Take your first step, this should bring you in line with the rear wheels.
3. Moving at a pace you are comfortable with, maintain a consistent roll forward keeping your lead
foot in line with the rear wheels.
Folding of Walker Frame
1. Lift the seat.
2. Remove the contents of the carry bag.
3. Pull the centre bar in an upwards direction and the walker will fold up.
Brake Adjustment
1. If the hand brake is to loose on your Seat Walker turn the tension adjustment screw (located at the
front of the hand brake) Clockwise one full turn at a time.
2. If the hand brake is too tight or hard to engage turn the tension screw in a Anti–Clockwise
direction
The brakes should have already been pre set at the manufacturer.
Clockwise & Anti – Clockwise are noted from standing in front of the Seat Walker.
Locking hand brake
Push down
hand brakes
Black plastic hand
adjusting nut
Lift up padded seat
Removable carry bag