
11
Boiling water
1.
In the standbymode,press 210°F (100°C).The indicator lights
up.
2.
If you want to keep the water at a set temperature after
boiling,press the relevant temperature button (100,130,160,
185 or 200°F) (40, 55, 70, 85 or 95°С). The indicator lights
up.
The temperature can be set or changed in the same way during
or after boiling.
3. Press and wait about 3 seconds: the indicator lights up
and the water starts to heat up.
4. When the water has boiled, depending on the settings:
• the kettle switches back into the standby mode (no indicator
light);
• the kettle switches into the temperature-maintenance mode
(the and temperature indicators light up).
5. Press to interrupt the heating process or switch off the
automatic temperature-maintenance mode.
Heating water without boiling
This is the recommended mode for bottled artisan or ltered
water.Water which has not been boiled retains its natural proper-
ties,which is particularly important when brewing premium teas.
1. In the standby mode,press .The indicator lights up.
2. Within 5 seconds,press the temperature button to set the
water temperature (100,130,160,185 or 200°F) (40,55,70,
85 or 95°С). The indicator lights up.
If the temperature is not set within 5 seconds, the appliance
switches to the standby mode (no indicator light).The tempera-
ture can also be changed during the heating process by pressing
the relevant temperature button.
3. Press or wait 5 seconds: the indicator lights up and the
water starts heating up. At the same time, the , and
temperature indicators will light up.
4. When the water has been heated, the kettle goes into the
temperature-maintenance mode (the and temperature
indicators light up).
Boil Dry Protection
The kettle switches off automatically after boiling and when it
is removed from its base.
If the kettle is empty or does not have enough water inside, the
dry-boil protection will switch the kettle off automatically.When
it has cooled down,the appliance will again be ready for use.
Try to avoid activating the dry-boil protection as this can reduce
the life of the appliance.
The Ready for Sky technology
The Ready for Sky technology enables to use the software app of
the same name to control the appliance remotely from a smart-
phone or tablet.
1.
Enable the Bluetooth function on the electric kettle (see
«Bluetooth function»).
The remote control of the Kettle SkyKettle RK-M170S-A is only
possible when the Bluetooth function is on.