Redmond HB007 User manual

USER MANUAL
HB007
Model: HB-2080
HAND BLENDER
TURBO

DESCRIPTION:
A. Speed Control Dial
B. Switch
C. Switch
D. Motor unit
E. Button
F. Blender stick
G. Chopping bowl lid
H. S” blade
I. Chopping bowl
J. Whisk holder
K. Whisk
L. Milk frother beater
M. Vessel
CAUTION
Please read the instructions carefully and completely before
using the appliance.
1.Before plugging into a socket, check whether the voltage
corresponds to the rating label of the appliance.
2.Always disconnect the blender from the power supply if it is
left unattended and before assembling, disassembling, and
cleaning.
3.Don’t plug the appliance into the power supply until it is fully
assembled and always unplug before disassembling the appli-
ance or handling the blade.
4.Don’t let children play with this appliance.
5.Don’t let the motor unit, cord, or plug get wet.
6.Never use a damaged appliance. If it has been damaged,
please get it to approved service center to be checked or
repaired.
7.If the supply cord is damaged, it must be replaced by
approved service center.
Ⅰ
Ⅱ(TURBO Button)
L
M
TURBO

8.Don’t let any excess cord hang over the edge of the table or
worktop or touch any hot surface.
9.The blades are very sharp!
10.Don’t place the appliance in hot ingredients.
11.The appliance is constructed to process normal household
quantities.
12.Neither the measuring beaker, nor the chopping bowl is
micro-wave proof.
13.Use the appliance for no longer than 1 minute continiously,
and don’t operate on hard food for longer than 15 seconds.
14.This appliance should not be used by children and care
should be taken when used near children.
15.Switch off the appliance and disconnect from supply before
changing accessories or approaching parts which move when
in use.
16.Clean the hand blender with a dry cloth.
17.The user should follow instructions stated in this manual
for details on how to clean surfaces in contact with food, the
operating times and speed for accessories.
18.Do not misuse the hand blender. Care should be taken when
handling the sharp cutting blades, emptying the bowl and
during cleaning
19.This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capacities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
20.Children should be supervised to ensure that they do not
play with the appliance .

The hand blender is perfectly suited for preparing dips, sauces,
soups, mayonnaise and baby food as well as for mixing and
milkshakes.
1.Insert the blender stick onto the motor unit until it locks.
2.Put the hand blender in the mixing container. Then press
switchⅠor switchⅡ.
3.Unplug the appliance, then press the eject button to remove
the blender stick after use.
You can use the hand blender in the measuring beaker and
other vessels.
Caution: The blade is very sharp!
HOW TO USE THE HAND BLENDER
x
TURBO
TURBO
TURBO

The chopper is perfectly suited for hard food, such as chopping
meat, cheese, onion, herbs, garlic, carrots, walnuts, almonds,
prunes etc.
Don’t chop extremely hard food, such as ice cubes, nutmeg,
coffee beans and grains.
Before chopping…
1.Carefully remove the plastic cover from the blade.
Caution: The blade is very sharp! Always hold it by the upper plastic part.
2.Place the blade on the center pin of the chopper bowl. Press down
the blade and lock the bowl in place. Always place the chopper bowl
on the anti-slip base.
3.Place food in the chopper bowl.
4.Place the chopping bowl lid on the chopper bowl.
5.Place the motor unit on the chopper bowl lid until it locks.
6.Press the switch to operate the chopper. During processing, hold
the motor unit with on hand and the chopper bowl the other.
7.After use, unplug the appliance, then press the eject button to
remove the motor unit.
8.Remove the chopping bowl lid.
9.Carefully take out the blade.
10.Remove the processed food from the chopper bowl.
HOW TO USE YOUR CHOPPER
TURBO
TURBO

Use the whisk for whipping cream, beating egg whites and
mixing sponges and ready-mix desserts.
1.Insert the whisk into the whisk holder, and then slot the gear
box onto the motor unit until it locks.
2.Place the whisk in a vessel. Then press switch Ⅰor switchⅡto
operate it.
3.Unplug the appliance, then press the eject button to remove the
gear box after use. Then pull the whisk out of the gear box.
HOW TO USE YOUR WHISK
TURBO
TURBO

HOW TO USE YOUR MILK FROTHER
The milk frother is intended for frothing milk quickly and perfectly.
1. Insert the milk frother beater into the whisk holder unit firmly.
2. Connect the coupling unit to the motor unit.
3. Press the switch to activate the blender，and press the
turbo buttonafter approximately 1 minute to prevent
ingredients splashing.
4. Unplug the appliance, then press the eject button to remove
the gear box after use. Then pull the milk frother beater out of
the gear box.
TURBO
TURBO

CLEANING
Cleaning the motor unit and chopping bowl lid only with a
damp cloth only. Do not immerse the motor unit in water!
1.All other parts can be cleaned in the dish washer. However, after
processing very salty food, you should rinse the blades right away.
2.Also, be careful not to use an overdose of cleaner or decalcifier
in your dishwasher.
3.When processing food with color, the plastic parts of the
appliance may become stained. Wipe these parts with vegetable
oil before placing them in the dishwasher.
4.The blades are very sharp, please pay attention to them when
cleaning.
5.Unplug the appliance before cleaning.
PROCESSING GUIDE (FOR 500ML CHOPPING BOWL)
nut, almonds 150g 15sec
cheese 100g 10sec
bread 80g 10sec
onions 200g 10sec
biscuits 150g 10sec
soft fruit 200 10sec
Food Maximum Operation time
meat 250g 15sec
herbs 50g 10sec
Yeast
dough
flour
water
cream
power
sugar
250g
165g
2.5g
2.0g
1.2g
10sec