Reebok iRun 3.0 User manual

HRC (Heart Rate Control) PROGRAMS:
1) Function: The hand pulse sensors can detect the user’s actual heart rate and treadmill
will adjust the speed to increase/decrease user’s actual heart rate to reach the value of
Pre-set Target Heart Rate. If user’s actual heart rate is lower than the Pre-set Target
Heart Rate, treadmill will increase the speed as step by step automatically till the actual
user’s heart rate reaches the Pre-set Target Heart Rate. If user’s actual heart rate is
higher than the Pre-set Target Heart Rate, treadmill will lower the speed as step by step
automatically till the actual user’s heart rate reaches the Pre-set Target Heart Rate.
There are 3 groups of default setting on HRC programs as Hr 1 , Hr 2 and Hr 3 programs.
2) Press “PROGRAM”button to select Hr 1 – Hr 3 while the treadmill is under standby
mode, Press the “MODE” button to enter the HRC program, the PULSE window will show
“ 25 ” and blink which is default user age, you can adjust the user age by pressing “+/-”
buttons (Range : 13 - 80) then press “MODE” to confirm. The PULSE window will show
the numbers of Pre-set Target Heart Rate and blink that according to user age, you can
adjust the pre-set target heart rate numbers if necessary then press “MODE” button to
confirm. The TIME window will show 30:00 and blink which is default exercise time, you
can adjust the exercise time by pressing “+/-”buttons (Range 5-99minutes) then press
“MODE”button to confirm. Press “START”to start the HRC program.
3) Please firmly hold the hand pulse sensors when you are using the HRC programs.
**WARNING : Please be aware that treadmill speed will be adjusted automatically in
these HRC programs.

0.6 1.0