Regulus VZK 3-230-1P R Series User manual

www.regulus.eu
VZK 3xx - 230 - 1P R - 001
VZK 3xx - 230 -1P R - 001
EN
Instruction Manual
MOTORIZED 3-WAY ZONE BALL VALVE
VZK 3xx - 230 - 1P R - 001

1 – APPLICATION
Motorized valves of VZK 3xx - 230 - 1P R line can be used in connection with any controller that is tted
with a 230 V switch.
2 - FEATURES
The actuator is designed for easy on-site installation. When the actuator reaches either end position the
voltage supply is interrupted by limit switches. In case of a controller failure the actuator can be put into
a manual mode by turning the knob “e” on the housing cover with a screwdriver which will disengage the
gears. The actuator can now be set in any position by turning the knob “h” and this position is indicated on
a scale.
3 – TECHNICAL DATA
Actuator
Power supply: 230 V, 50 Hz
Power consumption (operation):4VA
Power consumption (stand-by): 2,5 VA
Microswitch rating: 1 (1) A, 250 V, 50 Hz
Electrical protection: IP42
Protection class: II
Rotation time: 60 s/90° (17177 -15 s/90°)
Torque: 15 Nm
Ambient temperature: 0 °C to 40 °C
Connection cable: 2 m long, 3 x 0,5 mm2
Model Code G DN
[mm]
A
[mm]
B
[mm]
C
[mm]
Kvs
[m3/h]
Weight
[kg]
VZK 315 - 230 - 1P R - 001 13602 1/2” 15 145 48,5 67 10.5 1.15
VZK 320 - 230 - 1P R - 001 13603 3/4” 20 145 50.5 69.5 10.5 1.1
VZK 325 - 230 - 1P R - 001 13604 1” 25 156 60 82 14 1.3
VZK 325 - 230 - 1P R - 15 17177 1” 25 156 60 82 14 1.3
2|
4 – DIMENSIONS
Valve
Type: 3-way ball valve,
connection with inner
thread
Fluid temperature: 110 °C max.
Max. working pressure: PN16
Fluid: Sanitary/drinking water
and non-aggressive
uids, glycol up to 30%.
A
C84
B
100

Mounting positions
Valve
Type: 3-way ball valve,
connection with inner
thread
Fluid temperature: 110 °C max.
Max. working pressure: PN16
Fluid: Sanitary/drinking water
and non-aggressive
uids, glycol up to 30%.
|3
5 – CONNECTION
a
bf
j
k
„h“
d
„e“

6 - OPERATION
7 - VALVE POSITION
The knob“h”position indicates clearly if the valve is open or closed.
B
AB
A
AB
Control o (indicator - blue) Control on (indicator - red)
Automatic operation
Manual operation
LED controls:
When the knob “e“ is in position
actuator runs in automatic operation.
the motorized
the motorized
actuator is o.
The valve position is set by a knob.
The actuator is tted with 2 LED controls,
left and right. They display the rotation direction of the
motorized actuator.
Orange (turning anti-clockwise)
Orange (turning clockwise)
When the knob “e“ is in position
Turning anti-clockwise
Knob “e“
4|

8 - ACTUATOR ELECTRICWIRING, ADJUSTING ITS
SENSE OF ROTATION
Controlled by a switch in a controller or thermostat
(single-pole wiring)
In order to change the sense of rotation, it is necessary to remove the front cover of the actuator rst, see
Fig. below.
|5
230 V (24 V) ~
N
1 2 3
NL
L
1 2 3

6|
In order to change the sense of rotation, pull out and reposition the jumper.
Right-hand rotation (vertical jumper) Left-hand rotation (horizontal jumper)

Motorized 3-Way Zone BallValve
VZK 3xx - 230 - 1P R - 001
WARRANTY CERTIFICATE
Seller: ................................................. Date of Purchase: ......................................
1. The Seller grants the Buyer a Guarantee period of 24 months from the date of purchase.
2. The product will be installed and commissioned by a competent company or a person trained
by the manufacturer.
3. When claiming warranty, this Warranty Certicate must be submitted together with the purchase
receipt.
4. The warranty is valid only when the technical conditions set by the Manufacturer, installation
manual and instructions in the documentation and on the product itself are maintained.
5. The warranty does not cover defects caused by external conditions or improper working
conditions, defects caused by normal wear and tear, further when the product is not used
in compliance with its purpose and when the defect was caused by mechanical damage to
the product, improper handling, tampering by a third person, improper installation, improper
stocking, natural disaster etc.
COMMISSIONED BY
Company name: ………………………………..
Date: ……………………..
Rubber stamp print and signature of the installer:
WARRANTY CONDITIONS
|7

©2019 We reserve the right to errors, changes and improvements without prior notice.
REGULUS spol. s r.o.
E-mail: [e-mail]
Web: www.regulus.eu
v2.3-04/2019