REID LIFTING 3M Bracket Installation instructions

REIDLIFTING.COM
3M Bracket
Assembly & Operation Guide

Assembly Instructions 4
Porta Gantry Rapide 500 4
Porta Gantry Rapide 1000 6
Porta Gantry; S & M 8
Porta Gantry 10
T Davit 12
Porta Davit 500 14
Porta Davit Quantum 16
Porta Davit Quantum Single Winch 18
Porta Davit Quantum Double Winch 20
Fitting device into Bracket 22
Contents

3
Lightweight.
Portable. Safe.
Please read the following instructions and guidance notes carefully. These have been designed
to aid users in carrying out the correct assembly of the bracket for each of our compatible lifting
systems. Systems compatible with this product are:
•
•
•
•
•

The following instructions detail the assembly of the Bracket Kits 3M Device [RAWB003520] and the 3M Ultra-Lok SRL [RAWB003525] for the Porta Gantry Rapide,
both Small [S] and Medium [M] frame types.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions: 500

Present the bracket to the trap plate, insert and
secure the M12 bolt supplied with the bracket.
Prepare the bracket to recieve the device, remove
the pin supplied with the bracket.
The bracket comes with the bolts supplied, as
shown above.
Remove the top bolt from the trap plate.
31 2
5
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
5
PORTADAVIT QUANTUM
5
Assembling the PORTA GANTRY RAPIDE 500: Bracket kit 3M Device (Sealed Blok Rebel) and 3M Ultra-loK SLR
Bracket Kit 3M Device (Sealed Blok, Rebel) - [RAWB003520]
Bracket Kit 3M Ultra-LoK SRL - [RAWB003525]
4

The following instructions detail the assembly of the Bracket Kits 3M Device [RAWB003520] and the 3M Ultra-Lok SRL [RAWB003525] for the Porta Gantry Rapide,
both Small [S] and Medium [M] frame types.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions: 1000

Present the bracket to the trap plate, insert and
secure the top and bottom M12 bolts supplied
with the bracket.
The bracket comes with the bolts supplied, as
shown above.
31
Prepare the bracket to recieve the device and
remove the pin supplied with the bracket.
2
4
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
7
PORTADAVIT QUANTUM
7
Assembling the PORTA GANTRY RAPIDE 1000: Bracket kit 3M Device (Sealed Blok Rebel) and 3M Ultra-loK SLR
Bracket Kit 3M Device (Sealed Blok, Rebel) - [RAWB003520]
Bracket Kit 3M Ultra-LoK SRL - [RAWB003525]

The following instructions detail the assembly of the Bracket Kits 3M Device [RAWB003520] and the 3M Ultra-Lok SRL [RAWB005022] for the Porta Gantry,
both Small [S] and Medium [M] frame types.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions: ; S & M

Present the bracket to the trap plate, use the
centre holes in the trap plate, insert and secure
the M12 bolt supplied with the bracket.
The bracket comes with the bolts supplied, as
shown above.
Prepare the bracket to receive the device, and
remove the pin supplied with the bracket.
31 2
4
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
9
Assembling the PORTA GANTRY: Bracket Kit 3M Device (Sealed Blok Rebel) and 3M Ultra-loK SLR
Bracket Kit 3M Device (Sealed Blok, Rebel) - [RAWB003520]
Bracket Kit 3M Ultra-LoK SRL - [RAWB005022]

The following instructions detail the assembly of the Bracket Kit 3M devices [RAWB003000] for the Davits & Gantry Winch Column.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions:

Insert pins provided to secure bracket to section.
Prepare the bracket ready to recieve the device.
The bracket comes with the pins supplied, as
shown above.
Present the bracket onto the winch column.
31 2
6
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
Bracket Kit 3M device - [RAWB003000]
11
Assembling the PORTA GANTRY Intermediate and above sizes: Bracket Kit 3M devices
4

The following instructions detail the assembly of the Bracket Kit 3M devices [RAWB003000] for the Davits & Gantry Winch Column.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions:

Insert the pins provided to secure bracket to the
section.
Prepare the bracket ready to recieve the device.
The bracket comes with the pins supplied, as
shown above.
Present to the T-Davit column.
31 2
6
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
Bracket Kit 3M device - [RAWB003000]
13
Assembling the T DAVIT: Bracket Kit 3M Device
4

The following instructions detail the assembly of the Bracket Kit 3M device [RAWB003003] for the Davits & Gantry Winch Column.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions: 500

Insert the pins provided through the bracket.
The bracket is ready to recieve the device.
The bracket comes with the pins supplied, as
shown above.
Present the bracket onto the Porta Davit 500
backstay.
31 2
5
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
15
Assembling the PORTA DAVIT 500: Bracket Kit 3M device
Bracket Kit 3M device - [RAWB003003]
4

The following instructions detail the assembly of the Bracket Kit 3M devices [RAWB003000] for the Davits & Gantry Winch Column.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions:

Insert the pins provided with the bracket.
Present the sheave bracket to the top of the
column.
The bracket comes with the pins supplied, as
shown above.
Present the bracket into the Porta Davit Quantum
column.
31
Insert the pins provided.
2
Prepare the bracket ready to recieve the device.
6
17
Assembling the PORTA DAVIT QUANTUM: Bracket Kit 3M devices
Bracket Kit 3M devices - [RAWB003000]
For this configuration a sheave bracket column is required.
RAWB000095 – Sheave bracket PDQ column Medium sheave (4-7mm). See Page 22 to fit the device onto the bracket.
4 5

The following instructions detail the assembly of the Bracket Kit 3M devices [RAWB003000] for the Davits & Gantry Winch Column.
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions:

Insert the pins provided with the bracket.
Prepare the bracket ready to recieve device.
The bracket comes with the pins supplied, as
shown above.
Present the bracket into the Porta Davit Quantum
backstay.
31 2
5
See Page 22 to view the assembly instructions for
the fitting of the device onto the bracket.
19
Assembling the PORTA DAVIT QUANTUM Backstay Single Winch: Bracket Kit 3M devices
Bracket Kit 3M device - [RAWB003000]
4

The following instructions detail the assembly of the Bracket Kit 3M devices [RAWB003010] for the PORTA DAVIT QUANTUM Backstay (Double Winch).
Appropriate PPE should be worn: Gloves Protective Footwear
Assembly Instructions: