Renogy REGO User manual

VERSION A0
Inverter Charger
REGO
12V 3000W
QUICK GUIDE
AC / INV CHC
OFF
ON
FAULT
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
Pure Sine Wave Inverter Charger

02
This Quick Guide contains important installation, operation, and maintenance instructions for REGO
12V 3000W Inverter Charger, hereinafter referred to as “Inverter Charger”. Please read the Quick
Guide carefully before using the device.
For additional support, contact our customer service through renogy.com/contact-us/.
zThe illustrations in this document are for demonstration purposes only. Details may appear slightly
di󰀨erent depending on product revision and market region.
Visit renogy.com to nd relevant documentation or get more support via "Contact Us".
US www.renogy.com CN www.renogy.cn
UK uk.renogy.com CA ca.renogy.com
AU au.renogy.com JP renogy.jp
FR fr.renogy.com DE de.renogy.com
ES es.renogy.com KR kr.renogy.com
For detailed instructions,
scan the QR code for the User Manual.
Your voice matters! Scan the QR code
to submit your feedback on the product.

Table of Contents
Package Contents .................................................................................................01
Product Overview ..................................................................................................02
External View.....................................................................................................02
Internal View ......................................................................................................03
Wiring Diagram......................................................................................................04
Preparation............................................................................................................05
Components & Tools..........................................................................................05
Mounting Location .............................................................................................07
Mounting ............................................................................................................08
Removing the Plate ...........................................................................................08
Cautions.............................................................................................................09
Ground Cable Wiring.............................................................................................10
Remote Control Wiring ..........................................................................................11
Temperature Sensor Wiring...................................................................................12
Battery Wiring........................................................................................................14
Device-side Wiring.............................................................................................14
Battery-side Wiring ............................................................................................15
AC Output Wiring...................................................................................................18
Device-side Wiring.............................................................................................18
Load Wiring........................................................................................................19
AC Input Wiring ....................................................................................................21

Automatic Generator Start.....................................................................................23
Communication......................................................................................................24
Inter-Device Communication .............................................................................24
Monitoring Device Communication ....................................................................26
Putting Plates Back ..............................................................................................28
Power on ...............................................................................................................29
Main Switch .......................................................................................................29
Wired Remote Control .......................................................................................30
Operation...............................................................................................................31
LCD....................................................................................................................31
Setting Battery Type...........................................................................................35
Working .................................................................................................................37
Power O󰀨...............................................................................................................39
Main Switch .......................................................................................................39
Wired Remote Control .......................................................................................39
Overcurrent Protection ..........................................................................................40
Maintenance..........................................................................................................41

01
Package Contents
AC / INV CHC
OFF
ON
FAULT
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
Quick Guide × 1 Battery Temperature Sensor x 1
AC/INV CHC
OFF
ON
FAULT
ARNING
pleasereadtheinstructions carefully
Beforeworkingonthis product.
Highvoltage,inorderto avoid risks,
PureSine Wave Inverter Charger
VERSION A0
Inverter Charger
REGO
12V 3000W
QUICK GUIDE
Wired Remote Control x 1 RJ11 Network Cable (5m) x 1
ON ERR
RMS-P2

02
Product Overview
External View
AC / INV CHC
OFF
ON
FAULT
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
7 8 9
2 3 4 5 61 6
1110
NO. Part NO. Part
1 Remote & Accessory Cable Entry 7 DC Negative Battery Cable Entry
2 AC Output Cable Grommet 8 DC Cable Plate
3 AC Input Cable Grommet 9 DC Positive Battery Cable Entry
4 Main Power Switch 10 Chassis Ground Lug
5 LCD & Button Panel 11 Top Plate
6 Mounting Holes
External View Internal View

03
Product Overview
External View Internal View
Internal View
WARNING
please read the instructions carefully
Before working on this product.
CHARGER INPUT
PROTECT
INVERTER OUTPUT
PROTECT
BTS
NO
NC
DRY
OUTPUT INPUT
N
NL
L
CONTACT
REMOTE
C
CAN
High voltage,in order to avoid risks,
AC/INV
OFF
ON
CHC FAULT
Pure Sine Wave Inverter Charger
GITIVE
ATIVE
14 15 1613
18 19 20 21 22
12
17
NO. Part NO. Part
12 Wired Remote Port (REMOTE) 18 Battery Temperature Sensor (BTS) Port
13 Dry Contact Relay Terminal Block 19 DC Negative Battery Terminal
14 AC Output Lever Terminal Block 20 Fan
15 AC Input Lever Terminal Block 21 DC Positive Battery Terminal
16 Input Circuit Breaker 22 Output Circuit Breaker
17 Communication Port (CAN Bus)
zPlease inspect the inverter charger for any visible damage including cracks, dents, deformation,
and other visible abnormalities. All connector contacts shall be clean, dry, and free of dirt and
corrosion.
zNo parts inside the inverter charger require maintenance or repair. Do not repair, tamper with, or
modify components of the inverter charger.

04
Wiring Diagram
WARNING
please read the instructions carefully
Before working on this product.
CHARGER INPUT
PROTECT
INVERTER OUTPUT
PROTECT
BTS
NO
NC
DRY
OUTPUT INPUT
N
NL
L
CONTACT
REMOTE
C
CAN
High voltage,in order to avoid risks,
AC/INV
OFF
ON
CHC FAULT
Pure Sine Wave Inverter Charger
GITIVE
ATIVE
Remote control
Temperature sensor
Ground
Negative (DC)
Positive (DC)
Shore Power or Generator
(120V Single Phase, 40A Max.)
AC Load Center
AC Output
(120V Single Phase, 30A Max.)
Battery System (12V) Chassis Ground Lug
+
Wired Remote Control
ON ERR
RMS-P2
Neutral wire (AC)
Live wire (AC)
zAll wiring should be done by qualied personnel to ensure compliance with all applicable
installation codes and regulations.
zPlease wear proper protective equipment and use insulated tools during installation.
zRisk of electric shock! Ensure that all power sources are disconnected before installation.
zDo not connect the AC Load Output to an AC Power Source such as generator or shore power.
Otherwise, severe damage may occur.
zDo not use the temperature sensor on a LiFePO4 (LFP) battery which comes with a Battery
Management System (BMS).

05
Preparation
Components & Tools
Recommended Components
Battery Scenario A: REGO Battery Kit
REGO 12V 400Ah Lithium Iron Phosphate
Battery REGO 4 Ports 400A System Combiner Box
DC-DC Charger
Inverter
Battery Adapter Cable 4/0 AWG (Anderson 350 Connector to Ring Terminal Adapter Cable)
Battery Scenario B: Normal Battery Kit
Normal Battery with +/- Bolts Battery Inverter Cable 4/0 AWG
+
-
Optional Accessories
DC Fuse (400A) Fuse Cable 4/0 AWG
Components & Tools Mounting Location Mounting Removing the Plate Cautions

06
Preparation
Required Tools
Wrench (10mm) Wrench (14mm) Measuring Tape Insulation Tape
10mm
10mm
10mm
14mm
14mm
14mm
3
4
5
6
Phillips Screwdriver
(6mm)
Slotted Screwdriver
(6mm)
Socket Wrench
(12mm) Wire Stripper
Bare Wire
Grounding (6 to 8 AWG) AC Output (10AWG) x 3
zThe AC Output Cable Grommet has an inner diameter of 13mm. Properly select the AC cable
size, ensuring it can run through the grommet.
Components & Tools Mounting Location Mounting Removing the Plate Cautions

07
Mounting Location
zRisk of explosion! Never install the inverter charger in a sealed enclosure with ooded batteries!
Do not install it in a conned area where battery gases can accumulate.
zInstall the inverter charger as close to the battery as possible to avoid voltage drops due to long
cables. It is recommended to use an adapter cable of a maximum of 15 meters. If the length of
the adapter cable is insu󰀩cient, please re-select the installation site.
zKeep the inverter charger away from ammable liquids such as gasoline.
zInstall the inverter charger on a at surface indoors protected from direct sunlight, high
temperature, and water. Make sure there is good ventilation.
zDo not install the inverter charger near ammable fumes or gases.
zEnsure that there is enough space to install the cable. Allow at least 10 inches of clearance at
the fan and at least 7 inches around each side. It is better to have a larger ventilation gap. Do not
obstruct the fan openings.
zThe inverter charger can be xed vertically (terminals facing down) to the wall or horizontally to
the oor.
AC/INV CHC
OFF
ON
FAULT
ARNING
pleasereadthe instructions carefully
Beforeworkingon this product.
Highvoltage,inorder to avoid risks,
PureSine Wave Inverter Charger
1.1.1
≥178mm
(7in)
≥178mm
(7in)
≥254mm
(10in)
≥254mm
(10in)
1.1.2
AC/INV CHC
OFF
ON
FAULT
ARNING
pleasereadthe instructions carefully
Beforeworkingon this product.
Highvoltage,inorder to avoid risks,
PureSine Wave Inverter Charger
Plan the installation site. Measure the length of the adapter cable to see if it can be
connected to the inverter charger.
AC / INV CHC
OFF
ON
FAULT
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
1.1.3
AC / INV
OFF
ON
After the installation site is
determined, please press the
main switch of the inverter
charger to the "OFF" position
and keep it until the inverter
charger is ready to be
powered on.
Preparation
Components & Tools Mounting Location Mounting Removing the Plate Cautions

08
Preparation
Components & Tools Mounting Location Mounting Removing the Plate Cautions
Mounting
Recommended Accessories
Self-tapping Screws
(M8 or M6)
zPlease choose proper self-tapping screws based on the
installation site.
zPlease make sure the inverter charger is rmly mounted on
the installation site to prevent it from sliding or falling o󰀨.
AC/ INV CHC FAULT
ARNING
pleaseread the instructions carefully
Beforeworking on this product.
Highvoltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
M6
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
AC/ INV CHC FAULT
ARNING
pleaseread the instructions carefully
Beforeworking on this product.
Highvoltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
M8
1.2.1
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
OFF
ON
OFF
ON
Align the inverter charger
with the mounting position to
x it with self-tapping screws
through the mounting holes.
Removing the Plate
CHARCER W
PROT
REMOTE
AC / INV CHC FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
LL
N
OUTPUT INPUT
N
AC / INV CHC
OFF
ON
FAULT
ARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
Pure Sine Wave Inverter Charger
1.3.1
ON
ARNING
High voltage,in order to avoid risks,
OFF
ON
Turn the two upper panel
screws counterclockwise by
hand and remove the Top
Plate. Alternatively, you can
use a Phillips screwdriver.
AC / INV CHC FAULT
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCER W
PROT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARCER W
PROT
REMOTE
AC / INV
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
1.3.2
OFF
ON
OFF
ON
Turn the two lower panel
screws counterclockwise by
hand and remove the DC
Cable Plate. Alternatively, you
can use a Phillips screwdriver.

09
Cautions
zMake sure that all adapter cables are not connected to any device before connection. If they are
connected, make sure that all power devices are powered o󰀨.
zConrm the polarity of the cable before connecting it to the auxiliary one. A reverse polarity
contact will result in abnormalities. Damage caused by a reverse polarity contact voids the
warranty.
zPlease ensure that all ring terminals are securely connected.
zColor code and label all AC cables coming to/from the inverter charger. Use colored electrical
tape or heat shrink tubing.
zMake sure all cables have a smooth bend radius and no kinks are present.
Preparation
Components & Tools Mounting Location Mounting Removing the Plate Cautions

10
Ground Cable Wiring
zStrip some insulation o󰀨 the grounding cable by using a wire stripper according to the depth of
the wiring hole.
zThe torque of the cable retainer screw is 13.5N·m. Do not overtighten the screw to prevent
damage.
zWhen connecting the inverter charger to the chassis ground lug of your RV, please consult the RV
supplier to conrm the location of the chassis ground lug. A connection terminal can be installed if
needed.
AC / INV CHC FAULT
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCER W
PROT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
2.1
OFF
ON
2.2
PROT
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
2.3
Turn the cable retainer
screw for Chassis Ground
Lug counterclockwise with a
slotted screwdriver to ensure
that the cable retainer is open.
Insert one end of the bare
wire into the wiring hole of the
Chassis Ground Lug.
Tighten the cable retainer
screw for Chassis Ground
Lug clockwise with a slotted
screwdriver to fasten the
cable.
AC/ INV CHC FAULT
Pure Sine Wave Inverter Charger
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCER W
PROT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
2.4
OFF
ON
Connect the other end of the
ground cable to the Chassis
Ground Lug of the RV.

11
ON ERR
RMS-P2
Remote Control Wiring
You may choose to use the wired remote control of the inverter charger.
AC / INV CHC FAULT
Pure Sine Wave Inverter Charger
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCER W
PROT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
3.1
REMOTE
DRY
CAN
NO
NC
C
CONTACT
L
OUTPUT
OFF
ON
AC/INV
ON
OFF
CHG FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this
product.
High voltage,in
order to avoid risks,
INVERTEROUTPUT
NO
NC
C
DRY
CONTACT
3.2
BTS
CAN
REMOTE
DRY
CONTACT
NC
C
NO
Run one end of the supplied RJ11 cable through the Remote &
Accessory Cable Entry.
Connect the connector
to Wired Remote Port
(REMOTE).
3.3
ON
OFF AC/INV CHG FAULT
Wired Remote Port (REMOTE)
Wired Remote Control
ON ERR
RMS-P2
Connect the connector on the
other end of the RJ11 cable to
the Wired Remote Control.

12
Temperature Sensor Wiring
The temperature sensor measures the temperature of the battery and provides the inverter charger
with a charge voltage calibration mechanism to ensure that the inverter charger can properly charge
the battery within the operating temperature range from -20°C to 60°C or -4°F to 140°F.
zDo not use the temperature sensor on a LiFePO4 (LFP) battery which comes with a Battery
Management System (BMS).
zStrip some insulation o󰀨 the grounding cable with a wire stripper.
zDo not overtighten the cable retainer screws; otherwise it will lead to stripped screws or screw
bending.
zThere is no requirement on polarity for temperature sensor cables.
OFF
ON
AC / INV CHC FAULT
Pure Sine Wave Inverter Charger
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCER W
PROT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
4.1
REMOTE
DRY
CAN
CONTACT
4.2
Run the bare terminal of the temperature sensor through Remote
& Accessory Cable Entry.
Turn the cable retainer screw
for wire harness connector
counterclockwise with a
slotted screwdriver to ensure
that the cable retainer is open.
AC/INV
ON
OFF
CHG FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
ON
OFF
4.3
NO
NC
C
DRY
CONTACT
AC
/INV
ON
OFF
CHG
please read the instructions carefully
Before working on this product.
WARNING
please read the instructions carefully
Before working on this product.
High volt
age,in order to avoid risks,
NO
NC
C
DRY
CONTACT
BTS
CAN
NO
4.4
Insert the bare terminal of the temperature sensor into the
harness connector and tighten it with a slotted screwdriver by
turning the cable retainer screw for wire harness connector
clockwise.
Plug the harness connector
into the BTS Port of the
inverter charger.

13
Temperature Sensor Wiring
+
-
4.5
Place the temperature sensor near the inverter charger and x it
with a cable tie or insulation tape if necessary.

14
Battery Wiring
Device-side Wiring
zThe specication of DC Positive/Negative Battery Terminal is M8. Please select the appropriate
ring terminal.
zThe retaining nut torque of DC Positive/Negative Battery Terminal is 26N·m. Do not overtighten it
to prevent damage.
AC/INV
ON
OFF CHG FAULT
WA
RNING
please r
ead the instructions carefully
Before wor
king on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions
carefully
Before working on this product.
High voltage,in order to av
oid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
AC/INV
ON
OFF CHG FAULT
WARNING
please read the instructions carefully
Bef
ore working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instruct
ions carefully
Before working on this product.
High voltage,in order
to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
5.1.1
Remove the retaining nut of
DC Negative Battery Terminal
by turning it counterclockwise
with a socket wrench and then
remove the gasket.
AC/INV
ON
OFF
CHG FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NC
C
AC/INV
ON
OFF
CHG
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NC
C
5.1.2
Remove the retaining nut of
DC Positive Battery Terminal
by turning it counterclockwise
with a socket wrench and then
remove the gasket.
AC / INV CHC FAULT
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCER W
PROT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
5.1.3
REGO Battery Kit
Normal Battery Kit
OFF
ON
Insert the positive ring terminal
of the battery adapter cable
through DC Positive Battery
Cable Entry of Removable DC
Cable Entry, and the negative
battery ring terminal through
DC Negative Battery Cable
Entry of DC Cable Plate.
Device-side Wiring Battery-side Wiring

15
AC/INV
ON
OFF CHG FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
5.1.4
NO
NC
C
DRY
CONTACT
AC/INV
ON
OFF CHG FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
AC/INV
ON
OFF CHG FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
5.1.5
Connect the negative ring
terminal to DC Negative
Battery Terminal.
Install the gasket and retaining nut, and tighten the nut clockwise
with a socket wrench.
AC/INV
ON
OFF CHG
FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGER INPUT
PROTECT
INVERTER OUTPUT
PROTECT
5.1.6
AC/INV
ON
OFF CHG
FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
AC/INV
ON
OFF CHG
FAULT
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
CHARGERINPUT
PROTECT
INVERTEROUTPUT
PROTECT
NO
NC
C
DRY
CONTACT
5.1.7
Connect the positive ring
terminal to the DC Positive
Battery Cable Entry.
Install the gasket and retaining nut, and tighten the nut clockwise
with a socket wrench.
Battery-side Wiring
zThis inverter charger only supports 12V batteries. Please read the user manual of the specic
battery in use carefully to make sure the battery voltage is 12V before connection.
zMake sure the battery is disconnected from its power supply before connection.
zIdentify the polarity (positive and negative) on the cables used for the inverter charger. A reverse
polarity contact may damage the inverter charger. Damage caused by polarized connections
voids the warranty.
Battery Wiring
Device-side Wiring Battery-side Wiring

16
Battery Scenario A: REGO Battery Kit
zPlease read the REGO 4 Ports 400A System Combiner Box User Manual carefully before
connection.
zWhen connecting the combiner box to the inverter charger via the system hub of Anderson
connector, install a 400A NH fuse in the top disconnection switch.
zIf the inverter charger is connected to the System Combiner Box with a ring terminal adapter
cable, please visit renogy.com for the user manual of the inverter charger.
zIf the REGO 12V 400Ah Lithium Iron Phosphate Battery is wired with Positive/Negative Busbars,
please visit renogy.com for the user manual of the inverter charger for wiring instructions.
zEnsure tight t of Anderson connectors during installation.
AC/ INV CHC FAULT
Pure Sine Wave Inverter Charger
REMOTE
DRY
CAN
NO
NC
C
CONTACT
CHARCERW
PROT
WARNING
pleaseread the instructions carefully
Beforeworking on this product.
Highvoltage,in order to avoid risks,
LL
N
OUTPUT INPUT
N
NEGATIVE
WARNING
please read the instructions carefully
Before working on this product.
High voltage,in order to avoid risks,
5.2.1.1
OFF
ON
Connect Anderson 350 connector of battery adapter cable to System Combiner Box.
Battery Wiring
Device-side Wiring Battery-side Wiring