ResMed airsense 10 autoset Guide

My sleep therapy:
ResMed
equipment start guide
AirSense™10 AutoSet™CPAP machine
AirFit™P10 mask

BResMed equipment start guide
Getting started with your
new equipment
Watch the video
For an overview on how to set up
your ResMed equipment, visit
ResMed.com/RemoteSetUp

1ResMed.com/RemoteSetUp
Treating your sleep apnoea plays such
an important role in improving your
energy and health,
1and you’re in good
hands with your ResMed AirSense 10
machine and AirFit P10 mask.
This setup guide will walk you through how to use your new equipment.
Please read the user guide included in your package carefully and refer to it for
detailed information about product use and related precautions.

2ResMed equipment start guide
What’s inside AB
C
Shipping box
ADevice travel bag
BStart guide
CAirFit P10 nasal pillows mask
Device travel bag
DAirSense 10 machine
EHumidAir™humidifier tub*
FAir tubing
GPower transformer and power cord
HSD card (not available in all devices)
IUser guide
My sleep therapy:
ResMed CPAP
equipment start guide
AirSense™10 AutoSet™CPAP machine
AirFit™P10 mask
*only if you have been prescribed a humidifier with your machine.

3ResMed.com/RemoteSetUp
ED
G
F
I
AirSense™ 10 AUTOSE T
AUTOSET FOR H ER
ELITE
CPAP
User Guide
English
I
Francais
I
Español
I
Português
MAX
H

4ResMed equipment start guide
Setting up your
AirSense 10
machine
Let’s begin by setting up your
AirSense 10 machine.
AInsert the power cord into the back
of your machine using the round plug.
BConnect the power cord to the power
supply and plug the other end into
an electrical outlet.
CYour machine will power on and
display the Home screen.
AB
C
STEP 1
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home

5ResMed.com/RemoteSetUp
AB
C
STEP 2
Attaching your
air tubing
AYou can find your air tubing in the
zippered pocket of your AirSense10
travel bag.
BConnect your air tubing by holding
the cuff and lining it up with
the connector port on the back
of the machine.
CIf you have a ClimateLineAir™tubing,
be sure to line up the connector
pin on the tubing cuff to the
corresponding slot on the
connector port.
DPush until it clicks into place.
ClimateLineAir
connected
Complete
My Options
ClimateLineAir
connected
Complete
My Options
Note: The air tubing included
with your machine may
not include the connector
port shown in images
B and C (this is only for
ClimateLineAir tubing).
If that’s the case, simply
connect the air tubing firmly
to the air outlet located on
the back of the machine.

6ResMed equipment start guide
AB
C
STEP 3
Preparing your
HumidAir
humidier tub*
ASnap open the lid of the water tub.
BFill with water to the maximum water
mark on the tub. Do not use hot
water.
CClose the lid until it snaps shut.
Gently push the water tub into the
side of the machine until you feel it
slide down and lock into place.
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
*If your machine does not have a humidifier, please do not put water in to the machine. Water should not go inside the
black outer housing.

7ResMed.com/RemoteSetUp
Navigating
your AirSense 10
machine
AThe START/STOP button located on
the top of your machine is used to
begin and end therapy.
BThe dial on the front is used to adjust
comfort settings and access your
sleep therapy data. Turn it to navigate
the menu, and press it to confirm
your choice.
CThe HOME button sends you back to
the Home screen, regardless of where
you are in the menus.
Note: All of your other machine settings
are pre-set to your personal therapy needs per
your healthcare provider. You should not need
to make any additional setting adjustments.
AB
C
STEP 4
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home

8ResMed equipment start guide
Unboxing
your mask
STEP 5
AB
C
L
L
R
S
L
R
AMask system
BAdditional cushions*
CRemove your mask from
the packaging.
DYour P10 mask is fully assembled
out of the box (no additional
assembly required).
D
* Additional cushions not for resale

9ResMed.com/RemoteSetUp
How to t
your mask
AHold the pillows away from your nose
ensuring the pillow size (eg, M) with the
left (L) and right (R) indicators are facing
towards you. Then guide the nasal
pillows into your nostrils (L into your left
nostril, R into your right nostril).
BPut the headgear on by holding the
bottom band and stretching it around the
back of your head. The top band should
sit comfortably on top of your head.
Tip! There are raised logos at the top of
the frame so you can feel the right way
up if fitting in the dark.
CMove the mask away from your face
then place it back to get a comfortable
fit. Ensure both nasal pillows are secure
in your nostrils and positioned upright.
AB
C
STEP 6

10 ResMed equipment start guide
A B
C
STEP 7
Connecting
your mask to
your machine
AWith your mask on your face,
connect the tube from your machine
to your mask.
BOn the Home screen, turn the dial
to My Options and press the dial
to confirm your choice.
CScroll down to the Run Mask Fit
option and press the dial. The machine
will start blowing air and a green happy
face will automatically appear on the
screen. Wait a few seconds to ensure
the screen does not change; a happy
face indicates that your mask is fitted
properly.
Ramp Time Auto
4Humidity Level
Full FaceMask
OAirplane Mode
Run Mask Fit
Run Warmup
Home
Sleep Report
My Options
Home My Options
Mask Fit
Adjust
Stop Mask Fit
My Options
Mask Fit
Good
Stop Mask Fit
My Options
Ramp Time Auto
4Humidity Level
Full FaceMask
OAirplane Mode
Run Mask Fit
Run Warmup
Home
Sleep Report
My Options
Home My Options
Mask Fit
Adjust
Stop Mask Fit
My Options
Mask Fit
Good
Stop Mask Fit
My Options
Ramp Time Auto
4Humidity Level
Full FaceMask
OAirplane Mode
Run Mask Fit
Run Warmup
Home
Sleep Report
My Options
Home My Options
Mask Fit
Adjust
Stop Mask Fit
My Options
Mask Fit
Good
Stop Mask Fit
My Options

11ResMed.com/RemoteSetUp
D E
GF
DIf the happy face screen changes to a
red sad face, this indicates your mask
may be leaking. You may need to make
small adjustments.
ETo readjust your mask, pull it away
from your face and gently let it fall
back against your skin.
FWhen your mask is properly fitted,
you’ll see the happy face appear back
on the screen.
GWhen you’re ready to start therapy,
press the START/STOP button.
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Ramp Time Auto
4Humidity Level
Full FaceMask
OAirplane Mode
Run Mask Fit
Run Warmup
Home
Sleep Report
My Options
Home My Options
Mask Fit
Adjust
Stop Mask Fit
My Options
Mask Fit
Good
Stop Mask Fit
My Options
Ramp Time Auto
4Humidity Level
Full FaceMask
OAirplane Mode
Run Mask Fit
Run Warmup
Home
Sleep Report
My Options
Home My Options
Mask Fit
Adjust
Stop Mask Fit
My Options
Mask Fit
Good
Stop Mask Fit
My Options

12 ResMed equipment start guide
Getting used to your therapy
STEP 8
Breathe normally
When you use your machine for
the first time tonight, remember
to breathe normally. Focus on
breathing in and out through
your nose only.
Pressure may feel
strange at first
It may feel easier than normal to
inhale, but harder than normal
to exhale. Take your time – even a
few minutes of breathing normally
with your machine will help you
relax and get used to therapy.
If you find yourself struggling and
thinking about breathing, consider
deep meditation breathing as
this helps to increase relaxation.
Remember, you can stop and start
therapy at any time by using the
START/STOP button on the top
of your machine.
Check for leaks
Check for leaks and make any
necessary mask adjustments
before falling asleep. Adapting
to therapy takes time, so be
patient with yourself. The best
way to adjust to therapy is
to use your machine nightly.

13ResMed.com/RemoteSetUp
myAir score
A daily snapshot of
how well you slept.
Badges
Celebrate reaching milestones
in your treatment.
Tips
Learn ways to improve your
comfort and sleep better,
sent by email.
Alerts
Know if something is wrong
with your mask or machine,
and how to fix it.
Personalised sleep tools
How-to instructions, videos
and personalised information.
!
!
!
!
!
STEP 9
Download myAir
Discover myAir™from ResMed,
a free, personalised monitoring
and coaching app that’s designed
to optimise your CPAP therapy
experience.
Start using myAir by downloading
the app or scanning the QR code.
S
C
A
N
M
E
!

14 ResMed equipment start guide
Caring for your equipment
Maintaining and caring for your CPAP equipment is an important step to help you
get the most out of therapy.
Mask care
Over time, your skin may release facial oil that can reduce the quality and performance of
your mask, so it’s important to clean it daily with mild soap. Avoid harsh cleaning products,
which may damage your mask or leave harmful residue. We also recommend cleaning
your mask shortly after use and allowing it to dry away from direct sunlight.
For more information on how to clean and care for your mask, please refer to your
AirFit P10 Nasal Pillows System user guide.

15ResMed.com/RemoteSetUp
Machine care
To deliver consistent, high-quality therapy, your CPAP machine needs to be well-maintained.
A blocked air filter may impact the pressure delivered to you. It’s important to regularly
examine the air filter for holes or dust build-up. Refer to your AirSense 10 series user guide
for specific recommendations on how to keep your machine performing at an optimal level.
Humidifier care
Maintaining your HumidAir humidifier tub can prevent the buildup of deposits and help
ensure comfortable therapy.
Each week, we recommend washing the water tub with a mild detergent and warm water.
Then thoroughly rinse and dry it away from direct sunlight. The tub should also be checked
regularly for wear and deterioration. Replace it if there are any holes, tears or cracks.
Please note that this cleaning information is only a summary. For more detailed information on cleaning
your ResMed CPAP equipment, refer to the product’s individual user guide.

16 ResMed equipment start guide
Benets of sleep apnoea treatment
When left untreated, sleep apnoea can negatively affect your energy levels,
productivity
and mental well-being.
1It can also have long-term, adverse effects on your heart, 1
metabolism and health.
1Sleep apnoea can affect anyone 1– fit or overweight, old or young,
male or female. A few of the common symptoms are:
•Loud snoring
1
•Lack of energy
1
•Daytime sleepiness
1
•Morning headaches
1
•A partner or family member notices that you stop breathing during sleep
1
Effective treatment of sleep apnoea has been shown to help alleviate these symptoms,
which can lead directly to a healthier mental outlook and improved well-being.
2,3

17ResMed.com/RemoteSetUp
For more ResMed CPAP equipment information,
visit ResMed.com/RemoteSetUp
For specic questions about your equipment,
contact your equipment provider or
ResMed customer support: 0800 917 7071

See ResMed.com for other ResMed locations worldwide. Air10, AirFit, AirSense, ClimateLine Air, HumidAir and myAir are trademarks and/or registered trademarks of the ResMed family of companies. Specifications may change without notice. For patent and other intellectual property information, see
ResMed.com/ip. © 2023 ResMed. 10112064/2 2023-09
Please refer to the user guide for relevant information related to any warnings and precautions to be considered before and during use of the product.
References:
1. Memon J, Manganaro SN. Obstructive Sleep-disordered Breathing. In: StatPearls. StatPearls Publishing, Treasure Island (FL); 2022. PMID: 28722938.
2. Schwartz DJ & al. For individuals with obstructive sleep apnea, institution of CPAP therapy is associated with an amelioration of symptoms of depression which is sustained long term. J Clin Sleep Med. 2007;3(6):631-635.
3. MFarrell PC, Richards G. Recognition and treatment of sleep-disordered breathing: an important component of chronic disease management. J Transl Med. 2017;15(1):114. Published 2017 May 25. doi:10.1186/s12967-017-1211-y.