ResMed AirFit P10 Assembly instructions

Distributed by:see ResMed.com for ResMed locations worldwide. ActiveAir, AirFit, AirMini, HumidX, QuickFit and Swift are trademarks and/or registered trademarks of the ResMed
family of companies. For patient information, see ResMed.com/ip.See ResMed.com for other ResMed locations worldwide. © 2017 ResMed Ltd. Specifications may change without
notice. 10110062/1 2017-05
1
• Align your left (L) and right (R) pillows with
your left and right nostrils.
• To insert your waterless humidifier, simply
open your vent module with a twist.
Fitting guide for AirFit P10 for AirMini
Inserting HumidX or HumidX Plus
2
• Pull the headgear straps over your head.
Your lower headgear strap should sit
comfortably at the back of your head.
The top strap should sit comfortably
on your crown.
• Insert your choice of humidifier: HumidX
or HumidX Plus. It’s recommended to
begin therapy with HumidX and switch
to HumidX Plus if necessary.
5
• Your mask is now fitted and ready to use.
When the device is running, a light breeze
should be felt near the venting area around
the tube connection.
4
• To ensure a comfortable fit, briefly pull your mask away from your nose and reseat the pillows.
• Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
3
• To achieve a comfortable fit, adjust the
headgear straps. For a looser fit, spread the
upper and lower straps apart. To tighten,
draw them closer together.
• Reassemble your module with another
twist.
Note: For complete user instructions, refer to the AirFit P10 for AirMini User Guide.
A simple and easy design
AirFit P10 for AirMini™offers an expanded feature-set – combining the
pocket-sized portability and the new HumidX™waterless humidification
of ResMed’s AirMini Solution with the comfort and visual freedom of
the existing AirFit P10 mask design.
Available exclusively with AirMini, AirFit P10 for AirMini helps deliver
compact, travel-friendly therapy – for patients who want to enjoy the
benefits of therapy wherever they go.
ResMed.com/AirFitP10forAirMini
12 3
ResMed Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia

QuickFit elastic headgear
62935
62936 (for Her)
AirFit P10 headgear clip(s)
62962 (1 pk of 2 clips)
62965 (10 pk of 2 clips)
Pillows
62930 (XS) Extra Small
62931 (S) Small
62932 (M) Medium
62933 (L) Large
HumidX
38846 (1 pk)
38809 (3 pk)
38810 (6 pk)
38808 (50 pk)
HumidX Plus
38847 (1 pk)
38812 (3 pk)
38813 (6 pk)
38811 (50 pk)
QuickFit™ elastic headgear
with split-strap design provides
stability and adjustability with minimal
facial contact.
HumidX waterless humidification
designed to minimise heat and moisture
loss to deliver warm, comfortable air
throughout therapy for most climates and
sleep environments.
HumidX Plus is available for dry climates
and high altitude environments where
humidity levels are very low, e.g., aircraft.
Compact, under-the-nose frame
delivers visual freedom for reading
or watching TV before bed.
Key-clip nasal pillows
offer effortless assembly with
left/right orientation to assist
patients in fitting the mask with
accuracy and ease.
ActiveAir™advanced venting
enables our latest therapy technologies
to be delivered in a compact system.
Dual-wall technology
with trampoline action designed to
seal on contact and disperse air gently
to the nose.
Designed for easy
tting, cleaning and
assembly
Headgear clips
included with every AirFit P10 for
AirMini package allow for further
mask adjustment for those
who need it.
The legacy of AirFit P10
Designed to be 50%
1quieter and 50% lighter than ResMed’s most popular mask at the time,
itself the winner of a 2014 reddot award, the AirFit P10 has grown to be one of our most
celebrated mask products. A clinical study found that 79% of patients who were using the
AirFit P10 after 2 weeks were still using therapy after 8 months.2On average, patients slept
more than 40 minutes longer per night using the AirFit P10.1
With its elegant design and popularity, it was ideally positioned to be redesigned and updated –
as the ultimate companion mask for the new portable AirMini travel system.
Product codes
AirFit P10 for AirMini Mask Pack:
- AirFit P10 for AirMini mask x1
- HumidX x1
- HumidX Plus x1
- AirMini Tube x1
38824
P10 Connector for AirMini 38845
1 ResMed internal clinical study comparing AirFit P10 to Swift™FX.
2 Al. Wimms, K. Hall, C. Ziegenbein, H. Woehrle - Increase in the number of patients remaining on CPAP therapy.ResMed White Paper, ResMed Science Centre,
ResMed, Munich, Germany.