RFI FSA40-67-DIN User manual

ASSEMBLY INSTRUCTIONS
Before assembling your antenna please confirm all the components below are included in the kit.
406-512 MHz
FSA40-67-DIN
0A-40-67-DIN
DIPOLE ASSEMBLY
QTY: 1
LARGE CLAMP PLATE
QTY: 4
M-8563
SCREEN
QTY: 1
M12 STUD ASSEMBLY
QTY: 4
M12 HEX NUT
M12x250 THREADED ROD
M12 SPRING WASHER
M12 FLAT WASHER
INS-40101-9 ©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 1 OF 4

406-512 MHz
$
',32/(
$66(0%/<
SCREEN
90°
2.5
M12 STUD ASSEMBLY
190
135
2MM (5.3")
TOP OF BOOM
TO TOP OF SCREEN
FSA40-67-DIN
ANTENNA ASSEMBLY
STEP 1:
ASSEMBLE THE DIPOLE TO THE SCREEN AS DEPICTED BELOW USING 2 OF THE 4 LARGE CLAMP PLATES
AND THE 4 M12 STUD ASSEMBLIES INCLUDED IN THE KIT. TIGHTEN THE M12 NUTS TO 55Nm (40 lbf.ft). LEAVE
APPROXIMATELY 190mm PROTRUDING OUT THE BACK SIDE.
INS-40101-9 ©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 2 OF 4

406-512 MHz
FSA40-67-DIN
MOUNTING TUBE
(NOT INCLUDED)
ANTENNA MOUNTING
HARDWARE HAS BEEN
DESIGNED TO ACCEPT
MOUNTING TUBE
DIAMETERS IN THE
RANGE OF 50-75mm (2-3")
MOUNTING TUBE LENGTH
TO BE SIZED BY
INSTALLER TO SUIT
INSTALLATION METHOD.
PLEASE NOTE MOUNTING
POLE NOT SUPPLIED.
LARGE CLAMP PLATE
INS-40101-9 ©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 3 OF 4
ASSEMBLY INSTRUCTIONS continued
STEP 2:
WITH THE ANTENNA ASSEMBLY LOCATED ON THE MOUNTING TUBE ATTACH THE REMAINING 2 LARGE
CLAMP PLATES AND TIGHTEN THE M12 NUTS CLAMPING THE ANTENNA ASSEMBLY TO THE MOUNTING
TUBE. TIGHTEN TO 55Nm (40 lbf.ft)

406-512 MHz
FSA40-67-DIN
TYPICAL
INSTALLATION
SIDE VIEW
TOWER
OUTRIGGER
TOWER CLAMPS
MOUNT POLE
SCREENED ARRAY ASSEMBLY
FSA-40-67-DIN
SCREENED ARRAY IS DESIGNED TO BE
FIXED TO A TOWER MOUNTED POLE OR
TOWER LEG.
ENSURE THAT MOUNTING POLE,
CLAMPS AND MOUNTING STRUCTURE IS
APPROPRIATELY SIZED TO SUIT LOCAL
WIND AND ICE INSTALLATION CONDITIONS.
STRAIN RELIEVE FEED CABLE
BACK
TO SUPPORT STRUCTURE.
SEAL
CONNECTOR WITH A
SUITABLE SELF
AMALGAMATING TAPE.
THESE ITEMS
NOT
INCLUDED
IN ANTENNA KIT:
ASSEMBLY INSTRUCTIONS continued
TYPICAL INSTALLATION
INS-40101-9 ©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 4 OF 4