RGBlink MSP 210V User manual

MSP 210V User Manual 1
MSP 210V
User Manual
Manual #: RGB-RD-UM-M210V E001
Revision: V1.0

MSP 210V User Manual 2
MSP 210V·User Manual
Thank you for choosing our products!
In order to allow you to learn how to use the Mini Converter quickly, we
bring you the detailed user Manual. You can read the introduction and
directions before using the video processor, please read all the information
we provide carefully to use our products correctly.
Copyright
©2015 All rights are reserved by RGBLINK.
This document is done independently by Xiamen RGBlink Science &
Technology Co.,LTD. No part can be copied, reproduced or translated
without permission.
Notice
RGBlink provides this manual ―as is‖ without warranty of any kind, no
matter expressed or implied, including but not limited to the implied
warranties or merchantability and fitness for a particular purpose. RGBlink
may make improvements or changes to the products and the programs
described in this publication at any time without notice.
This publication would contain technical inaccuracies or typographical
errors. Changes are periodically made to the information in this publication;
these changes are incorporated in new editions of this publication.
Federal Communications Commission
(FCC) Statement
This equipment has been tested and found to comply with the limits for a
classAdigital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses and radiates radio frequency energy and, if not
installed or used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area may cause harmful interference, in which case the
user will be responsible for correcting any interference.

MSP 210V User Manual 3
Guarantee and Compensation
RGBlink provides a guarantee related to perfect manufacturing as part
of the legally stipulated terms of guarantee. On receipt, the purchaser
must immediately inspect all delivered goods for damage incurred
during transportation, as well as for material and manufacturing faults.
Please complain to RGBlink by written notice.
The period of guarantee begins from the date of transfer of risks, in the
case of special systems and software on the date of commissioning, at
latest 30 days after the transfer of risks. In the event of justified notice of
compliant, RGBlink can repair the fault or provide a replacement at its own
discretion within an appropriate period. If this measure proves to be
impossible or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract.All other claims, in particular
those relating to compensation for direct or indirect damage, and also
damage attributed to the operation of software as well as to other service
provided by RGBlink, being a component of the system or independent
service, will be deemed invalid provided the damage is not proven to be
attributed to the absence of properties guaranteed in writing or due to the
intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on
goods delivered by RGBlink, or if the goods are handled incorrectly, in
particular if the systems are commissioned operated incorrectly or if, after
the transfer of risks, the goods are subject to influences not agreed upon in
the contract, all guarantee claims of the purchaser will be rendered invalid.
Not included in the guarantee coverage are system failures which are
attributed to programs or special electronic circuitry provided by the
purchaser, e.g. interfaces. Normal wear as well as normal maintenance are
not subject to the guarantee provided by RGBlink either.
The environmental conditions as well as the servicing and maintenance
regulations specified in this manual must be complied with the customer.
Trademark
Brand and product names mentioned in this manual may be trademarks,
registered trademarks or copyrights of their respective holders. All brand
and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or
their manufactures.

MSP 210V User Manual 4
Company Address
Xiamen RGBlink Science & Technology Co., Ltd.
Headquarter: S603~604 Wei ye Building Torch Hi-Tech Industrial
Development Zone Xiamen, Fujian Province, P.R.C
Shenzhen office: Floor 11, A1 Building, Baiwang R&D Building,
Shahe West Road, Xili Town, Nanshan District, Shenzhen,
Guangdong Province, P.R.C
Beijing office: Room 602, Building 7, CaiManJie, No.67 Chao yang
Road, Chao yang District, Beijing, P.R.C
Shanghai office: Building 3, 1358 Nong, Tong pu Road, Shanghai,
P.R.C
Tel: [phone]
Fax: [phone]
Customer Hotline: [phone]
Websites:
~http://www.rgblink.com
~http://www.rgblink.cn
E-mail: [e-mail]

MSP 210V User Manual 5
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top
cover will expose dangerous voltages. To avoid personal injury, do not
remove the top cover. Do not operate the unit without the cover installed.
Power Source
This product is intended to operate from a power source that will not apply
more than 230 volts rms between the supply conductors or between both
supply conductor and ground. A protective ground connection by way of
grounding conductor in the power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conductor of the power
cord. To avoid electrical shock, plug the power cord into a properly wired
receptacle before connecting to the product input or output terminals. A
protective-ground connection by way of the grounding conductor in the
power cord is essential for safe operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product. Use only
a power cord that is in good condition. Refer cord and connector changes
to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating,
and current rating characteristics. Refer fuse replacement to qualified
service personnel.
Do Not Operate in Explosive
Atmospheres
To avoid explosion, do not operate this product in an explosive
atmosphere.

MSP 210V User Manual 6
Terms in This Manual and Equipment
Marking
WARNING
Highlight an operating procedure, practice, condition,
statement, etc, which, if not strictly observed, could result in
injury or death of personnel.
Note
CAUTION
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Highlights an essential operating
procedure, condition or statement.

MSP 210V User Manual 7
Amendment Records
The table below lists the changes to the Mini Converter User Manual.
Format
Time
ECO#
Description
Principal
V1.0
2014-01-10
0001#
Release
Vira

MSP 210V User Manual 8
CONTENT
CONTENT.......................................................................................... 8
1. Brief Introduction....................................................................... 10
Chapter Structure.............................................................................11
How to Use the Manual...................................................................12
Term and Definitions........................................................................13
System Overview .............................................................................19
Application Questions .........................................................................20
2. Hardware Orientation................................................................ 21
In This Chapter.................................................................................21
Interface Description........................................................................22
INPUT Interface........................................................................................ 22
1: VGA Input.............................................................................................. 22
2.3: Audio Input Interface........................................................................ 22
4.5: Indicator............................................................................................. 22
OUTPUT and Other Interface................................................................ 23
3: SDI Output Interface........................................................................... 23
5: USB Interface....................................................................................... 23
1: Power .................................................................................................... 23
2.4.6: Indicator.......................................................................................... 23
Dial Switch ........................................................................................24

MSP 210V User Manual 9
1. Dial Switch............................................................................................ 24
3. Functional Description ............................................................. 25
Functional Description.....................................................................25
Functional Description Block Diagram...........................................25
4. Dial Switch Function................................................................. 26
Functional Description Block Diagram...........................................26
Instructions........................................................................................27
5. Communication Software Guideline....................................... 30
Running Software.............................................................................30
Use............................................................................................................. 30
Audio.......................................................................................................... 30
Version....................................................................................................... 31
Output Format .......................................................................................... 31
[Video Processor] Options...................................................................... 31
Language .................................................................................................. 31
Admin......................................................................................................... 32
Help............................................................................................................ 33
A. Specification.............................................................................. 34
B. Contact Information.................................................................. 35

MSP 210V User Manual 10
1. Brief Introduction
This chapter is designed to introduce you to the MSP 210V User Manual.
Areas to be covered are:
Chapter Structure
How to Use The Manual
Terms and Definitions
System Overview
Application Questions