RH Baby&child CALLUM User manual

PARTS INCLUDED:
A [1] EXTRA-WIDE DRESSER
TOOLS NEEDED:
PHILLIPS-HEAD SCREWDRIVER (NOT INCLUDED)
page 1 of 2
CALLUM EXTRA-WIDE DRESSER – ASSEMBLYINSTRUCTIONS
1
2
3
4
Metal Base 2 pcs.
2 pcs.
2 pcs.
Metal Plug
Phillips Screws M4 x 37mm
5
2 pcs.
Phillips Screws M4 x 16mm
1 pc.
Metal Cable
NO. ITEM DESCRIPTION QT Y.
WALL
4
3
A
ASSEMBLY INSTRUCTIONS:
YOUNG CHILDREN MAY BE INJURED BY TIPPING
FURNITURE. THE USE OF AN ANTI-TIPPING
RESTRAINT IS HIGHLY RECOMMENDED. WHEN
PROPERLY INSTALLED, THIS RESTRAINT COULD
PROVIDE PROTECTION AGAINST THE UNEXPECTED
TIPPING OF FURNITURE DUE TO SMALL TREMORS,
BUMPS OR CLIMBING. WE RECOMMEND
ATTACHMENT TO A WALL STUD WHERE
POSSIBLE OR INSTALLATION BY A
PROFESSIONAL WHEN ATTACHING THE ANTI-
TIP KIT TO MASONRY OR CONCRETE WALL.
ANTI-TIPPING RESTRAINT:
THE ANTI-TIPPING RESTRAINT IS ONLY A DETERRENT.
IT IS NOT A SUBSTITUTE FOR PROPER ADULT
SUPERVISION.
WARNING:
1. ATTACH THE METAL BASES TO THE
EXTRA WIDE DRESSER (A) AND
THE WALL USING THE SCREWS
PROVIDED (3, 4).
2. PLACE THE TWO ENDS OF THE METAL
CABLE (5) IN THE MIDDLE OF THE
METAL BASE AND CONNECT THEM
WITH METAL PLUGS (2) THROUGH
THE HOLES IN THE METAL BASE AND
WIRE HEAD.

page 2 of 2
CALLUM EXTRA-WIDE DRESSER – ASSEMBLYINSTRUCTIONS
2
2
1
1
5
A
A
5
WALL
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT-FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANSERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.

CALLUM EXTRA-WIDE DRESSER TOPPER – ASSEMBLY INSTRUCTIONS
WARNING:
FALL HAZARD - To prevent death or serious injury from falls, always keep child within arm's reach.
NEVER LEAVE CHILD UNATTENDED and always use restraining system.
This changing table is intended for use with children weighing up to 30 pounds.
CALLUM DRESSER TOPPER will be used with CALLUM EXTRA-WIDE DRESSER (sold separately)
with size 72"W x 20"D x 30"H. Cushion pad size is 72"L x 17 3/4"W x 3"H.
Do not use the CALLUM EXTRA-WIDE DRESSER or CALLUM DRESSER TOPPER if damaged or broken.
Customer Service:
- If you are missing parts or have any questions about this product, please contact us at : 1-800-762-1751
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions before use of the Dresser or Topper. For your safety, assembly by two or more adults is
recommended. Keep instructions for future use.
PRE-ASSEMBLY:
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Remove all parts and hardware from the box and lay out on a carpeted or scratch-free work surface.
The shipping box provides an ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts on the hardware list to identify and separate each of the pieces included prior to starting assembly.
Note: Do not fully tighten the screws until all parts are in place. Failure to follow these instructions may cause the
screws to misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
Page 1 of 2

CALLUM EXTRA-WIDE DRESSER TOPPER – ASSEMBLY INSTRUCTIONS
PARTS INCLUDED:
A [1] DRESSER TOPPER
B [1] 9 DRAWER DRESSER
TOOLS NEEDED:
Phillips-head screwdriver (not included)
1
2
B
A
Metal Brackets
8 pcs.
2 pcs.
Screws 7 x 15mm
NO. ITEM DESCRIPTION QT Y.
ASSEMBLY INSTRUCTIONS:
1. To connect CALLUM DRESSER TOPPER (A) to CALLUM
EXTRA-WIDE DRESSER (B), place Metal Brackets (2) over
the pre -drilled holes on back of topper and secure to
dresser with Screws (1).
2. The adjustable levelers should be used when the object is
placed on an uneven floor.
Page 2 of 2
1
2
2x
Phillips-head screwdriver
(not included)
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT-FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP
CLOTH.
3. DO NOT USE CHEMICAL CLEANSERS, ABRASIVES OR
FURNITURE POLISH ON THE LACQUERED FINISH.