RH Baby&child SLOANE User manual

PARTS INCLUDED
TOOLS NEEDED
Phillips-head Screwdriver (not included)
ASSEMBLY INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
1. Stand the Headboard (C) upright and attach Side Rails (A), as shown in Diagram I.
2.
3.
Page 1 of 2
5.
4.
CARE INSTRUCTIONS
Spot clean only with a soft, damp cloth.
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts.
Hook the Front rail (B) to the Side Rails (A), then tighten the bolts by using Allen Key (1), as shown in Diagram II.
Place the Slats (D) on the top of the Side Rail s'' side slats and fasten using Screw (3), as shown in Diagram III.
Lay the Platform Panels (E) on the top of the Slats (D), then fasten using Screw (2), as shown in Diagram IV.
Push the Trundle (F) into the daybed frame, making sure the Trundle front panel is flush with the daybed
A.SIDE RAILS (2)
B.FRONT RAIL (1)
C.HEADBOARD (1)
D.SLATS (4)
E.PLATFORM PANELS (2)
F.TRUNDLE (1)
Screws (3cm)
Screws (4cm)
Allen key (0.5cm Dia.) 1 pc.
8 pcs.
16 pcs.
DESCRIPTION
3
2
1
SLOANE TRUNDLE DAYBED FULL - ASSEMBLY INSTRUCTIONS
'
Front Pane;l (B).

Page 2 of 2
Diagram III
E
②
Diagram I
C
A
CD
③
Diagram IV
A
C
A
B
F
F
F
A
C
A
B
Diagram II
①
A
B