RH Baby&child DEVYN TUFTED DAYBED TWIN User manual

Page 1 of 2
DEVYN TUFTED DAYBED TWIN & FULL - ASSEMBLY INSTRUCTIONS
A. SIDE RAILS (2)
B. FOOTBOARD (1)
C. HEADBOARD (1)
E. CROSS SUPPORT SLAT (10)
D. CENTER SUPPORT SLAT (1)
F. CENTER SUPPORT SLAT FOOT (WITH ADJUSTABLE GLIDE) (10)
Phillips-Head Screwdriver (not included)
Place the Headboard (C) flat on the floor covered with a protective material to prevent damage.
Stand the Headboard (C) upright and hook Headboard (C) into Side Rails (A), as shown in
Diagram I.
Repeat the procedure with the Footboard (B), as shown in Diagram II.
Attach the Center Support Slat Foot (F) to the Center Support Slat (D), as shown in Diagram III.
Place the Center Support Slat (D) into the U-shaped brackets on Side Rails (A), as shown in
Diagram IV.
Place the Slat Roll (E) into the cleats on the inside of the Headboard (C) and Footboard (B). Screw
the ends of the Slats into the cleats using Screw (1), as shown in Diagram V.

B
A
A
B
C
A
C
A
Diagram I Diagram V
Diagram IV
Diagram II
Diagram III
CARE INSTRUCTIONS
Spot clean only with a soft,damp cloth.
Spot clean only with a soft, damp cloth.
Page 2 of 2
Thank you for your purchase
www.rhbabyandchild.com
D
D
2
F