RH Baby&child SLOANE TWIN User manual

Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts
1. Screw the Allen Head Bolt (2) to the Headboard (A), then stand the Headboard (A) upright and
2. Repeat above procedure to attach the Footboard (C), then tighten all Allen Head Bolts (2) with Allen Key (1).
3. Screw the Slats (D) on the top of the Side Rail’s side slats using Screw (3), as shown in Diagram II.
4. Lay the Platform Panel (E) on the top of the side slats, then fasten with screw (4), as shown in Diagram III.
1 of 2
Screws (4cm)
Screws (3cm)
1 pc
8 pcs
12 pcs
16 pcs
1
2
3
4
attach Side Rails (B), as shown in Diagram I.
PARTS INCLUDED
PARTS INCLUDED
ASSEMBLY INSTRUCTIONS
NO. ITEM DESCRIPTION QT Y.
Allen-Head Bolts (0.8cm Dia.)
SLOANE TWIN BED - ASSEMBLY INSTRUCTIONS
A. HEADBOARD (1)
B. SIDE RAILS (2)
C. FOOTBOARD (1)
D. SLATS (4)
E. PLATFORMS (2)
Philips-Head Screwdriver (not included)
-

2 of 2
Diagram I
Diagram II
A
B
C
Diagram III
1
2
D
3
E
4