RH Baby&child WIRE BIN BOOKCASE User manual

W I R E B I N B O O K C A S E
WARNING : ADULT ASSEMBLY ONLY OWING TO THE PRESENCE OF SMALL
PARTS, SHARP POINTS AND EDGES.
!
CUSTOMER SERVICE :
If you are missing parts or have any questions about this product please contact us at : 1-800-762-1751.
WARNING :
Young children may be injured by tipping furniture so proper installation of the mounting hardware for this item is
highly recommended. When properlry installed, this mounting hardware could provide protection against the
unexpected tipping of the furniture piece. This product is only a deterrent. It is not a substitute for proper adult
supervision.
CARE INSTRUCTIONS :
To clean, wipe with a soft cloth.
Avoid use of harsh chemicals or abrasive cleaners as these may damage the finishes.
TOOLS NEEDED :
Phillips head screwdriver (not included)
HARDWARE TO ATTACH UNIT TO WALL :
Page 1 of 2

ASSEMBLY INSTRUCTIONS
1. Determine the final position of the furniture piece. Mark locations on the wall approximately 2” below height
of the iron brackets on the back of the furniture piece.
2. Drill starter holes into the wall stud. If wall studs are not available, drill holes into the wall and insert plastic
anchors. Gently tap the anchors until the flange of the anchors are flush with the wall.
3. Install anti tip hardware with screws.
4. Hook the anchors to the back of the Bookcase.
Thank you for your purchase
www.rhbabyandchild.com
Nylon Strap
Bookcase
Top
1. Install anti tip hardware on wall with screws
at the level of brackets welded on the
Bookcase.
W I R E B I N B O O K C A S E
Page 2 of 2
2 Attach the hooks to the bracket on the back of
the Bookcase.