Rice Lake iDimension PWD User manual

iDimension® PWD
Static Dimensioning System
Operation Manual
PN 198811 Rev AJuly 21, 2020

An ISO 9001 registered company
© Rice Lake Weighing Systems. All rights reserved.
Rice Lake Weighing Systems® is a registered trademark of
Rice Lake Weighing Systems.
All other brand or product names within this publication are trademarks or
registered trademarks of their respective companies.
All information contained within this publication is, to the best of our knowledge, complete and
accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make
changes to the technology, features, specifications and design of the equipment without notice.
The most current version of this publication, software, firmware and all other product
updates can be found on our website:
www.ricelake.com

Contents
© Rice Lake Weighing Systems ● All Rights Reserved i
Contents
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com/training
or obtained by calling 715-234-9171 and asking for the training department.
1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 880 Panel Mount Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1.1 Kiosk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Test Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.0 Performing a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1 Triggering Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1.1 Touchscreen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1.2 Demo Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1.3 Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.0 Configuration Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1 Access Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1.1 View EULA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1.2 Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.3 Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.4 Data Extract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.5 Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.1.6 Upgrade Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.1.7 IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2 Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2.1 Device Information Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2.2 Weights and Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.0 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.1 Remote Sensors Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.2 Set Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.0 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.1 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.2 Component Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.2.1 Scale Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6.3 System Log Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.4 Debug Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.4.1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.5 Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6.5.1 Extended Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.5.2 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.6 API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

iDimension PWD Operation Manual
ii Visit our website www.RiceLake.com
Rice Lake continually offers web-based video training on a growing selection
of product-related topics at no cost. Visit www.ricelake.com/webinars

Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 1
1.0 Introduction
This manual provides an overview of the iDimension PWD operation instructions.
Ensure the iDimension PWD unit is fully assembled by following the instructions of the iDimension PWD Assembly Instructions
(PN 198812).
When interfacing this device to a third party program, please reference the software manufacturer’s documentation for setup
and configuration parameters as necessary.
Manuals and additional resources are available from the Rice Lake Weighing Systems website at www.ricelake.com
Warranty information can be found on the website at www.ricelake.com/warranties
1.1 Additional Resources
For additional resources, see the following information:
iDimension PWD Assembly Instructions
The iDimension PWD Assembly Instructions (PN 198812) provides an overview on how to assemble the iDimension PWD.
iDimension PWD Setup Manual
The iDimension PWD Setup Manual (PN 199543) provides an overview on how to setup QubeVu Manager for the iDimension PWD.
iDimension PWD Managers Guide
The iDimension PWD Managers Guide (PN 198680) provides an overview of the installation requirements, operation of the
iDimension PWD and configuration parameters to change in the QubeVu Manager to alter the performance of the unit.
The iDimension PWD Managers Manual is provided with each unit.
880 Performance™ Series Controller and Indicator Technical Manual
The 880 Performance Series Controller and Indicator Technical Manual (PN 158387) provides a detailed overview of the 880
indicator installation, configuration and operation procedures.
SUMMIT® 3000 Installation Manual
The SUMMIT 3000 Installation Manual (PN 76012) provides an overview of the SUMMIT 3000 installation procedure.
1.2 Regulatory Information
This product is a Class 1 Laser Product according to IEC 60825-1:2007 Ed. 2.0 and complies with 21 CFR 1040.1 pursuant to
Laser Notice No. 50. A laser source with a diffraction optical element is embedded in the product, which produces a maximum
output power of 1.1 mW at the aperture with a maximum wavelength of 825 nm.
FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense. Changes or modifications not expressly approved by Postea, Inc. could void the user’s FCC
granted authority to operate the equipment.

iDimension PWD Operation Manual
2 Visit our website www.RiceLake.com
1.3 Safety
Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or corruption
to and loss of data.
General Safety
Do not operate or work on this equipment unless this manual has been read and all instructions are understood.
Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake
Weighing Systems dealer for replacement manuals.
Failure to heed could result in serious injury or death.
Electric shock hazard!
For pluggable equipment the socket outlet must be installed near the equipment and must be easily accessible.
Always disconnect from main power before performing work on the device.
Do not allow minors (children) or inexperienced persons to operate this unit.
Do not operate without all shields and guards in place.
Do not place fingers into slots or possible pinch points.
Do not use this product if any of the components are cracked.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning labels.
Do not use near water, avoid contact with excessive moisture.
Keep the unit dry.
Never use damaged power cords, plugs or loose electrical sockets.
Never touch the power cord with wet hands.
Mount on a flat surface.
Never use product for anything other than its intended purpose.
Follow OSHA regulations for installation and use of equipment.
DANGER
WARNING
CAUTION
IMPORTANT
WARNING

System Overview
© Rice Lake Weighing Systems ● All Rights Reserved 3
2.0 System Overview
This section provides an overview of iDimension PWD kiosk indicator and control instruction.
The iDimension PWD kiosk houses the electrical components required to power and operate the iDimension PWD touchscreen
display and 880 Panel Mount Indicator.
Instructions for operation and use of the 880 Indicator are included with the iDimension PWD system.
Figure 2-1. Overview
Note
Kiosk
880 Front Panel Display
Touchscreen Display
IFM Sensors
Optional IFM Sensor
IFM Sensors
SUMMIT 3000 Floor Scale
Tower Assembly
Kiosk Mounting Bracket
Forklift Bumper Guard

iDimension PWD Operation Manual
4 Visit our website www.RiceLake.com
2.1 880 Panel Mount Indicator
For detailed information regarding the indicator setup and calibration, see the 880 Performance Series Controller and Indicator
Technical Manual (PN 158387).
2.1.1 Kiosk
For information regarding the iDimension PWD Kiosk, see the following information:
Figure 2-2. Kiosk
Connections
See the following information for details regarding kiosk connections:
Item Description
On/Off Switch Controls the power to the device and all electronics, including sensors, for the iDimension PWD; If used to power
cycle the system, ensure the system is powered down for 30 seconds and that the scale is clear during power up
USB Connector Connect optional wireless barcode scanner or use for firmware upgrade with USB thumb drive
Network Connection For connection to network or use as a service port for installation and troubleshooting
Table 2-1. Kiosk Connections

System Overview
© Rice Lake Weighing Systems ● All Rights Reserved 5
Front Panel Display
The front panel consists of a six-button keypad and a six-digit, 14-segment LED display. The Universal front panel includes a
numeric key pad.
The numeric display consists of six 14-segment LED digits. If a negative number is displayed, the first digit is used to display -,
reducing the number of available digits to five.
The symbols on the keys in Figure 2-3 (representing up, down, enter, left, right) describe the key functions when in
configuration mode. The keys are used to navigate through menus, select digits within numeric values, and increment/
decrement values, see Section 4.2 on page 13 for information about using the front panel keys in configuration mode.
Figure 2-3. 880 Front Panel Display (Universal Model Shown)
Not Applicable Keys
Tare, Print, Gross/Net are not applicable to the iDimension PWD.
Ensure the indicator is in the Gross Weight Mode to transmit the weight correctly to the iDimension display and API.
2.2 Test Object
A 20'' x 20'' test object is provided to periodically check calibration of the iDimension PWD. Calibration is only required if the IFM
sensors have adjusted from the initial installation.
Item No. Key Function
1 Returns the scale to 0 weight; Used to navigate to other menus or to select another digit when editing a value
2 Not applicable for this application
3 Not applicable for this application; Ensure the indicator is in the Gross Weight Mode to transmit the weight correctly to the iDimension
display and the API; Instructions for operation and use of the 880 Indicator are included with the iDimension PWD unit
4 If configured, toggles displayed weight between lb and KG; Switches the weight display to an alternate unit, defined in the format
menu (Section 4.2.2 on page 14); Units available: lb, kg, oz, metric ton, ton, gram; Used to navigate to different menus or to select
another digit when editing a value
5 Not applicable for this application
6 Allows access to the user setup menu; Also acts as the cancel key when editing parameter values, or Exit key when in the
configuration or user setup menus
Table 2-2. Key Functions
MENU
TARE
UNITS
ZERO
PRINT
GROSS
NET
B/N
Gross
Brutto
Net
lb
Series
kg
T
PT
R1 R2 R3
1
2
5
3
6
4
ZERO
PRINT
GROSS
NET
B/N
UNITS
TARE
MENU
Note

iDimension PWD Operation Manual
6 Visit our website www.RiceLake.com
3.0 Performing a Measurement
This section provides an overview of how to perform a measurement with the iDimension PWD.
To perform a measurement, see the following procedure:
1. Ensure the scale displays a 0 weight. Press on the 880 Indicator to return the scale to zero weight.
2. Place the pallet or box centered on the floor scale. Ensure the forklift or operator is clear within the 6' x 6' target area.
3. Trigger the dimension pressing the scan button on the touchscreen display, connected optional bar code scanner or
scan button from the Demo Display.
3.1 Triggering Methods
The iDimension PWD includes two standard methods of triggering the device to perform a measurement:
3.1.1 Touchscreen Display
The touch-screen display is used to navigate QubeVu. The Power button for the USB display is located on the back of the unit.
The USB operator display can be configured in QubeVu Manager.
Figure 3-1. Touchscreen Display
Function keys allow the iDimension PWD to be managed via the touchscreen display.
Item No. Function Function
1 Out of Bounds Indication For an example of an out of bounds indication, see Figure 3-2 on page 7
2 Displayed Dimensions Displayed Dimensions
3 Weight Display The weight display is used to indicate to weight of the item at the time of the item at the time of the dimensions were
captured; Use the 880 Indicator weight display to view live weight data, including negative weight
4 Information Button Provides access to configuration menu to set-up of time and date, display configured IP address and firmware
updates via USB thumb drive
5 Zero Height Key Not applicable to this application
6 Scan Button Trigger the iDimension PWD to dimension
7 Help Key Displays the Issue Review menu; Provides real time feedback to the operator of the unit; Provides step by step instructions
on how to clear conditions such as started, stopped, wait or remove condition with no object in the scan area
8 Live Image The weigh area provides a real-time view of the scanning area from the scanning head onto the USB display
Table 3-1. Key Functions
ZERO
5
2
1
4
3
6 7
8

Performing a Measurement
© Rice Lake Weighing Systems ● All Rights Reserved 7
Customer Display Icon – Out of Bounds Indications
Out of bounds indication provide a visual indication if the placement of the pallet or box is within a 72''x 72'' work area.
Figure 3-2 indicates the pallet is out of bounds on the left edge, when facing the scale:
Figure 3-2. Out of Bounds Indication – Left
Barcode Scanner
An optional USB barcode scanner, using keyboard wedge mode, can be attached directly to the iDimension PWD Kiosk Internal
PC. Use the scanner to scan a barcode and trigger a dimensioning transaction. The barcode scanned will also be included in
the API.
3.1.2 Demo Display
The Demo Display menu is intended for use during demonstrations and testing the effects of configuration changes.
The Demo Display menu can be used to help the Rice Lake Weighing Systems technical support team in troubleshooting.
• Press from the Display Pages menu (Figure 5-1 on page 15) to enter the Demo Display menu
Press to manually trigger a dimension.
Figure 3-3. Demo Display
Status messages are displayed within display screen menus. Messages displayed on screen are not error messages.
See Section 6.5 on page 36 for displayed status, extended status and error status messages.
Note

iDimension PWD Operation Manual
8 Visit our website www.RiceLake.com
3.1.3 Images
The iDimension PWD provides images in .jpg or .bmp format that are available to capture using the API.
There are two types of images:
IFM Sensor Low Resolution Intensity Images
The IFM sensors provide images with configurable bounding box and dimensioning data indications provided on each image.
The bounding box provides an indication of how the system has measured the object.
The images provided can become deteriorated as the object becomes closer to the sensor.
Below is an example of a bounding box when the cartons is aligned with the edge of the pallet:
Figure 3-4. Aligned Bounding Boxes
Below is an example of a bounding box when the cartons are not aligned with the edge of the pallet:
Figure 3-5. Unaligned Bounding Boxes
Optional High Resolution Image
When an optional Axis 2.4 mm with 3-axis camera angle adjustment is purchased, a color image is available from the API
(Figure 3-6). The image is used for freight identification and damage claims and does not have bounding boxes or dimensioning
data available.
Figure 3-6. High Resolution Image
Configuration settings are available using the QubeVu Manager’s Capture Definitions feature.
Note
Note

Configuration Menu
© Rice Lake Weighing Systems ● All Rights Reserved 9
4.0 Configuration Menu
This section provides an overview of iDimension PWD Configuration menu instructions.
4.1 Access Configuration Menu
To access the Configuration menu, see the following procedure:
1. Select the Device Information function key located at the bottom of the screen (Figure 4-1).
Figure 4-1. Select Device Information
2. The Device Info menu displays. For Device Info information (Section 4.2 on page 13).
Figure 4-2. Device Information
3. Select the Configuration function key from the Device Info menu.

iDimension PWD Operation Manual
10 Visit our website www.RiceLake.com
4. The Configuration Menu displays. For additional Configuration Menu information (Section 4.2.1 on page 13).
Figure 4-3. Configuration Menu
4.1.1 View EULA
The View EULA button displays the Software End User License Agreement.
Figure 4-4. End User License Agreement
Item Description Reference
Setup Wizard Not applicable –
View EULA Displays the Software End User License Agreement information Section 4.1.1
Time Zone Displays the current time zone and allows for time zone configuration Section 4.1.2 on page 11
Date & Time Allows the adjustment of date and time Section 4.1.3 on page 11
Data Extract View the configuration settings and the current and previous status;
Must be configuration in administration mode
Section 4.1.4 on page 11
Scan Zone Not applicable –
Restart Select to reboot the iDimension PWD unit Section 4.1.5 on page 12
Enable Flats Not applicable –
Upgrade Firmware Allows for a connected USB thumb drive to kiosk drive update the current device firmware Section 4.1.6 on page 12
IP Address Select to view the current IP address of the iDimension PWD unit Section 4.1.7 on page 13
Table 4-1. Configuration Menu Keys

Configuration Menu
© Rice Lake Weighing Systems ● All Rights Reserved 11
4.1.2 Time Zone
The Time Zone button allows configuration of the current time zone.
Figure 4-5. Time Zone
4.1.3 Date & Time
The Date & Time button allows configuration of the date and time.
Figure 4-6. Date & Time
4.1.4 Data Extract
If Long Terms Store and Daily Extract are enabled by the system administrator, the operator can view the configuration
settings and current/historical status. All settings are configured in the administrator mode of QubeVu Manager.
Figure 4-7. Extract Data
1. Select to refresh.
2. Select to perform a manual export.
3. Select the ruler icon to return to normal operating mode.

iDimension PWD Operation Manual
12 Visit our website www.RiceLake.com
4.1.5 Restart
Select Restart for confirmation before restarting the device. Select to confirm or to cancel the process.
Figure 4-8. Restart
4.1.6 Upgrade Firmware
Updated firmware may be available at www.ricelake.com. When upgrading the unit, the firmware release must be downloaded
to a USB drive.
1. Select Upgrade Firmware.
2. Attach the USB drive to the iDimension PWD USB port. Press to continue.
3. Firmware upgrade files contained on the USB drive are displayed.
4. Select the firmware upgrade required. Press to continue.
Figure 4-9. Connect USB Drive to Upgrade Firmware
The firmware update is copied from the USB drive to the iDimension PWD. The file checksum is used to validate the file.
Figure 4-10. Firmware Uploading Messages
5. Select when Uploaded file checksum displays to proceed with upgrade or to cancel the process.
The update process takes a few minutes. Do not interrupt the process. The iDimension PWD reboots.
Note
Uploaded File Checksum
Calculating Checksum
Uploading Firmware

Configuration Menu
© Rice Lake Weighing Systems ● All Rights Reserved 13
4.1.7 IP Address
The IP address displays the current IP address defined by the system administrator or network. Use the displayed IP address to
configure the network port to access the Administrative QubeVu Manager software for full system setup and configuration.
Figure 4-11. IP Address
4.2 Device Information
Provides access to a weights and measures inspector, important information about the device.
Figure 4-12. QubeVu Inspector Device Information Tab
Select the ruler icon to return to the normal operating mode.
4.2.1 Device Information Key
The Device Information function key displays the Device Info Menu.
Press to enter into the Device Info menu on the USB touchscreen display. The menu provides access to a weights and
measures Inspection menu and Configuration menu for setup of standard user functions.

iDimension PWD Operation Manual
14 Visit our website www.RiceLake.com
4.2.2 Weights and Measures
Legal-for-trade devices using category 3 audit trail, this screen is must be accessed by a local weights and measures inspector.
From the Device Info menu, select the Inspection button .
Figure 4-13. Inspection Menu
Certification Change Log
The Certification Change Log provides a log of configuration and calibration changes for weights and measures inspectors.
Figure 4-14. Certified Change Log
• Select or arrows to scroll up through the log
• Select the ruler icon to return to normal operating mode
• Select to return to previous screen
Transaction Log
For specific applications and International approvals, requires long term storage audit trail to be configured in the QubeVu
Manager Measurement Settings tab. If not configured, No LTS data is available displays.
Figure 4-15. Transaction Log

Calibration
© Rice Lake Weighing Systems ● All Rights Reserved 15
5.0 Calibration
This section provides an overview of iDimension PWD Calibration menu instructions.
The Calibration menu provides access to the following information:
• Calibration settings for the Sensor Calibration and Set Work Area configuration
• Camera calibration – if required, calibrates the iDimension PWD using the calibration object
To enter the Calibration menu use the following procedure:
1. Connect the iDimension PWD via ethernet to a computer.
2. Open a web browser and enter: http://192.168.0.2. QubeVu Manager displays. If IP static address has been set
different from the factory default, use the USB touchscreen display to identify IP address.
Figure 5-1. QubeVu Manager Home Page
Parameter Description
Displays Display information (iDimension PWD Managers Guide (PN 198680))
Operator Tools Operator tools information (iDimension PWD Managers Guide (PN 198680))
Admin Tools Admin tools instructions (iDimension PWD Managers Guide (PN 198680))
License License information (iDimension PWD Managers Guide (PN 198680))
Table 5-1. QubeVu Manager Home Page Navigation

iDimension PWD Operation Manual
16 Visit our website www.RiceLake.com
3. Press from the QubeVu Manager menu ( Figure 5-1 on page 15 ) to enter the Admin Tools menu
(Figure 5-2).
4. The QubeVu Manager login screen displays. The default username and password are admin and password.
Figure 5-2. Admin Tools Menu
Parameter Description
Setup General (optional and scale), time and date, data extraction and long term storage, measurement, network settings
( iDimension PWD Setup Manual (PN 199543))
Calibration Calibration settings, define work area and calibrate cameras (Section 5.0 on page 15)
Capture Definitions Capture definitions for QubeVu (iDimension PWD Managers Guide (PN 198810))
Firmware Upgrade Update firmware (Section 4.1.6 on page 12)
Backup Backup and restore settings (iDimension PWD Managers Guide (PN 198810))
Diagnostics Diagnostics settings (Section 6.1 on page 27)
Table 5-2. Admin Tools Navigation