Ricoh HP4-R2 User manual

21/12/2009
Page 1
HP4-R2 TRAINING
DUPLICATOR ENGINE
COURSE OVERVIEW
The course is broken up into several modules. This section outlines these modules.
The course covers the HP4-V2 and the optional peripherals. Software is covered in
separate courses.
The mechanisms are very similar to the Pink Gold/HP4 and Silver duplicator series.

21/12/2009
Page 2
Course Overview
Product Outline
Specifications
Installation
Operation
Machine Overview
Scanning
Image Processing
PRODUCT OUTLINE
The model will be introduced to the class.
The optional peripherals will be introduced to the class.
The product concept, sales points, and targets will be presented.
SPECIFICATIONS
Significant items will be discussed.
INSTALLATION
The class will install their machines and the peripherals.
The class will learn how to access SP modes and user tools.
The class will study how to upgrade the firmware.
OPERATION
This part of the course will cover some points about operating the machine.
MACHINE OVERVIEW
The components will be discussed.
The paper feed path and printing process will be outlined.
SCANNER
The scanner mechanism will be discussed.
IMAGE PROCESSING
This section explains the image processing done inside this machine.

21/12/2009
Page 3
Course Overview
Master Ejection
Master Feed
Drum
Paper Feed
Paper Delivery
Maintenance
Troubleshooting
Optional ADF
MASTER EJECT
This section explains how the used master is removed from the drum before the
new master is wrapped around the drum.
MASTER FEED
This section explains how the new master is wrapped around the drum.
DRUM
This section describes drum drive, ink supply, and the detection of masters on the
drum.
PAPER FEED
This section describes the paper feed, printing pressure, and paper table
mechanisms.
PAPER DELIVERY
This section explains how the printed page is fed out of the machine.
MAINTENANCE
PM is described briefly.
TROUBLESHOOTING
Basic points concerning service codes, diagnostics, and other troubleshooting tools
will be covered.
OPTIONAL ADF
The mechanisms of the optional ADF will be explained.

21/12/2009
Page 4
HP4-R2 TRAINING
DUPLICATOR ENGINE
PRODUCT OUTLINE

21/12/2009
Page 5
PRODUCT CONCEPTS AND MAIN
SALES POINTS

21/12/2009
Page 6
Appearance
Paper delivery
table
(capacity 1,000) Paper feed
table
(capacity 1,000)
Operation Panel
with Large LCD
Screen
The LCD is not a touch-panel.

21/12/2009
Page 7
Product Concept
Mid-range model with more capabilities than current
models in this range
zReplacement for the HP4 and Pink Gold models
zThe engine is based on the Pink Gold series.

21/12/2009
Page 8
Options
50-sheet Document Feeder
Colour Drum
A4 Drum (black only)
Tape Dispenser
Platen Cover
There is no sorter, Opal, or LCS.
The drums cannot be used with the Opal or HQ-Opal.
Introduce the range of available options.
¾The document feeder is the same as used with the Sapphire 2 and HP4.
¾The tape dispenser is almost the same as used with previous models. It is
modified for RoHS compliance.
¾The platen cover is the same type as used with previous models.

21/12/2009
Page 9
Platen Cover/ADF
The customer needs one of the above options.
This is because a platen cover is not installed at the
factory.

21/12/2009
Page 10
Sales Points
Good image quality
zHigh-quality ink and masters
Quiet
zSound-proofing materials are added to areas where
noise occurs
zNoise-generating mechanisms are modified
Reliable
zImproved paper delivery table
zPaper feed retry
Ink and masters: Same as the HP4
Slightly quieter than HP4, because of these modifications
Paper delivery table: The new mechanisms from the Emerald are used.