Rifton Blue Wave E541 User manual

Blue Wave
Bathing System
E541, E542, & E543 Product Manual
E541, E542 & E543

2© 2015 Rifton Equipment
Contents
Important information 3
Safety messages 4
Recommended use and item dimensions 5
Check your order 6
Basic components
Legs 6
Seat and back 7
Head blocks 7
Standard fabric cover 8
Soft fabric cover 9
Leg straps 10
Accessories
Tub stand 11
Shower stand 12
Conversion kit 12
Operation and maintenance 13
Cleaning and warranty 14
Materials and user modifications 15

3
IMPORTANT
Please save this product manual for future reference. Additional copies are
available at http://www.rifton.com/customer-service/product-manuals.
Key for users
Use this key to determine which sections of this product manual apply to you.
Technical Users For professionals who order and set up Rifton products.
Home Users For care-givers who use Rifton products on a regular basis.
Maintenance Personnel For anyone who is responsible for service or
re-ordering of Rifton products and parts.

4
• Thoroughly read and understand the information in this product manual before
attempting to use this product. If the procedures and instructions in this product manual
are not followed, serious injury or death could occur.
• A qualified professional must assess the appropriateness and safety of all equipment for
each user.
• This product is intended for use by clients of unreliable judgment. Adult supervision is
required at all times.
• To prevent falls and injuries:
○Do not use this product on rough and uneven terrain, around swimming pools, or
near stairways.
○Ensure the appropriate use of straps and supports at all times. Straps and supports
are provided for the safety of the user and must be carefully adjusted for comfort and
security.
○Tighten all adjustment knobs before use and immediately after making any
adjustments.
• Do not use this product for clients outside the height and weight limits specified in this
manual.
• To prevent pinching or crushing, ensure that all hands and feet are clear of moving parts
during adjustment.
• To prevent structural failure, which may result in serious injury or death:
○Inspect this product and accessories regularly for loose or missing screws, metal
fatigue, cracks, broken welds, missing attachments, general instability or other signs
of excessive wear.
○Immediately remove this product from use when any condition develops that might
make operation unsafe.
○Do not use Rifton components or products for any purpose other than their
intended use.
WARNING

5
Recommended use
The Blue Wave bathing system is a Class 1 medical device. The basic bath chair, with the
optional tub stand or rolling shower stand, provides a stable, quick-drying seat for bathing.
It provides safety and comfort for both bather and caregiver. Two types of fabric, either
standard or soft, are available to meet the needs of different clients.
User dimensions – inches (cm) small medium large
Height up to 36 (91) 32-50 (81-127) 46-68 (117-173)
Key user dimension: height
Select the appropriate bath chair by the user’s overall height. Choose the size that allows for
growth.
Important: Make sure that seat depth, width, and back height are adequate. The user’s weight must
not exceed the maximum working load.
Item dimensions – inches (cm) small medium large
Seat depth 13 (33) 13 (33) 16½ (42)
Seat width 14½ (37) 14½ (37) 14½ (37)
Back height 18 (46) 25 (64) 32 (81)
Seat height 2-7 (5-18) 2-7 (5-18) 2-7 (5-18)
Seat height (incl. tub stand) 11-17 (28-43) 11-17 (28-43) 11-17 (28-43)
Seat height (incl. shower stand) 28 (71) 28 (71) 28 (71)
Length of mesh area when flat 32½ (83) 38½ (98) 49½ (126)
Width of base 17 (43) 17 (43) 17 (43)
Length of base when flat 30 (76) 30 (76) 30 (76)
Tub stand height 10 (25) 10 (25) 10 (25)
Tub stand length 32 (81) 32 (81) 32 (81)
Tub stand width 17 (43) 17 (43) 17 (43)
Shower stand height 21 (53) 21 (53) 21 (53)
Shower stand width 27 (69) 27 (69) 27 (69)
Shower stand length 33 (84) 33 (84) 33 (84)
Max. working load - Lbs. (kg) 60 (27) 120 (54) 160 (73)
Back and seat angle adjustments 0°, 22°, 45°, 67°, and 90°
User and item dimensions

6
Check your order
Your Blue Wave bath chair, tub stand, or shower stand comes completely assembled.
The chair ships with the legs in the collapsed position and the headblocks attached
underneath. Reposition before use.
If your shipment is incomplete or in any way damaged on arrival, please call
Customer Service, 800.571.8198.
Figure 6a
1
1
3
3
2
2
Figure 6b
The Blue Wave bath chair comes in small,
medium, and large sizes. It can be used
with or without a stand. Standard or soft
fabric is available for all sizes.
Legs
The bath chair legs adjust to raise or lower
the chair by 7" (18 cm).
To raise or lower the chair (see Figure 6a):
1. Pull crossbar outward.
2. Rotate legs up or down.
3. Push crossbar in to engage.
The bath chair folds flat for storage
(see Figure 6b).
Basic components

7
Figure 7a
Trigger
Figure 7b
Seat and back
The seat and back adjust in 22˚ increments
to accommodate a variety of users. To
adjust the seat (see Figure 7a):
1. Pull red triggers on both side
of the frame.
2. Rotate seat and/or back to
appropriate position.
3. Release the triggers.
Head blocks
Slide the head blocks in and out on the
strap to adjust spacing. They can also be
positioned at any height using the hook
and loop fasteners at the back
(see Figure 7b).

8
Covers
Standard fabric
The vinyl-covered polyester mesh provides
a taut, firm surface that dries quickly (see
Figure 8a).
Chest straps
The standard fabric cover comes with
one chest strap, which may be used to
position and support the user. Additional
straps may be ordered if needed.
(see Figure 8b).
Leg straps
Fasten the leg straps to support the user’s
legs. Leg straps can be used for abduction
by wrapping ends of straps underneath
seat (see Figure 8c).
Figure 8b
Figure 8c
Figure 8a

9
Soft fabric
The soft polyester-knit is suitable for
younger clients, or for clients with sensitive
skin (see Figure 9a).
Chest strap
The soft fabric cover has a polyester
knit chest strap providing a comfortable
‘hug’ for secure lateral positioning. Extra
padding between fabric and frame softens
surface contact.
Attach the chest strap (see Figure 9b). The
inside strap goes around the chair and is
attached with hook and loop fasteners. The
outer strap goes around the user’s chest,
and side straps provide additional lateral
support (see Figure 9c).
Figure 9b
Figure 9c
Figure 9a

10
Figure 10a
Figure 10b
Leg straps
The leg straps thread through loops in
the cover and can be adjusted around the
user’s legs (see Figure 10a and 10b).
All straps can be removed. Adjustments
can be made with user in chair.

11
Accessories
To prevent falls, make
sure all four chair
legs are firmly latched in the sockets on
the stand before using the tub stand or
shower stand.
Blue Wave tub stand
The Blue Wave tub stand (see Figure 11a)
raises the chair to a working height of 9”
(23 cm), for the caregiver (see Figure 11b).
Small, medium, and large bath chairs fit on
the same stand.
To install the chair on the tub stand:
1. Put the legs in the down position.
2. Insert into sockets.
3. Press down firmly until the red levers
click into place.
To release (see Figure 11c):
1. Press down on each red lever and
2. Pull up to release each leg.
The tub stand is not sized
to fit onto the shower
stand or another tub stand.
WARNING
NOTICE
1
1
Figure 11c
Figure 11a
Figure 11b

12
Figure 12b
Figure 12a
Blue Wave shower stand
To prevent falls, lock
the four casters on the
shower stand during use.
The Blue Wave shower stand (see Figure
12a) puts the bath chair on wheels (see
Figure 12b), at standing height for the
caregiver. All three sizes of bath chair fit on
the same stand.
To install the chair on the shower stand:
1. Put the bath chair legs in the down
position.
2. Insert into the sockets.
3. Press down firmly until the red levers
click into place.
To release (see Figure 11c):
1. Press down on each red lever and
2. Pull up to release each leg.
Conversion kit
The tool-free conversion kit converts the
Blue Wave chair to a larger size: the small
chair to medium or the medium chair to
large. Call Customer Service to order.
WARNING

13
Operation
The Rifton Blue Wave bath chair is intended for use in a bathtub or shower. Its adjustability
and accessories enable bathing for clients with a wide range of disabilities. The seat
and backrest are angle adjustable to accommodate positioning needs. Head blocks,
chest straps and leg straps are designed for the safety of the client and must be carefully
adjusted for comfort and security. The frame legs can be placed securely in two positions
to raise or lower the bath chair prior to use. Frame legs are inserted into sockets when
the bath chair is positioned onto the tub or shower stand prior to use. The optional tub
stand is designed to raise bath chair height for an improved working position of the
caregiver. The optional shower stand places the bath chair on wheels at standing height
for the caregiver, for use in a shower. (See pp 6 – 12 for detailed instructions on product
adjustments.)
Maintenance
This product is designed and tested for an expected life of 5 years when used and
maintained in accordance with this manual. At all times, users must ensure that the
product remains in a safe and useable condition, including regular maintenance and
inspections as specified in this manual.
To prevent structural failure, which may result in serious injury or death:
• Inspect this product and accessories regularly for loose or missing screws, metal
fatigue, cracks, broken welds, missing attachments, general instability or other signs of
excessive wear.
• Immediately remove this product from use when any condition develops that might
make operation unsafe.
• Do not use Rifton components or products for any purpose other than their
intended use.
• Replace or repair components or products that are damaged or appear to be unstable.
• Use only Rifton authorized replacement parts. Order information for replacement parts
is provided on the back of this product manual.

14
Figure 14a
Cleaning
The Rifton Blue Wave bathing system is
designed for easy cleaning.
Remove the bath chair cover by rotating
both the seat and back to the vertical
position and pulling cover from frame,
seat-first (see Figure 14a).
Fabric parts should be washed and dried
at a warm (100°F/40°C) setting. Use mild
detergent. Rinse well. Disinfect frame and
fabric with a commercial disinfectant, or a
solution of up to 10% bleach. Rinse well.
The straps with hook and loop closures
may be laundered. Engage the closures
before washing. Do not iron.
Excessive use of bleach and high
temperatures may damage the fabric.
Do not iron.
Tub stand, shower stand and frame
parts may be cleaned using normal
cleaning products. Casters will give the
best performance if cleaned regularly by
spraying from underneath with a high-
pressure water hose. Do not use chemicals
or lubricants.
Warranty Statement
If a Rifton product breaks or fails in service during the first year, we will replace it
free of charge.

15
Materials
• Steel hardware items (nuts, bolts, screws, etc) are stainless steel.
• Upholstery items are reinforced vinyl (standard fabric) or polyester knit (soft fabric).
Soft fabric is cushioned with polyester spacer fabric.
• Straps are typically made of polypropylene or nylon webbing.
• Plastic components are typically injection molded from a variety of
industrial resins.
All materials are latex, lead and phthalates free.
User modifications
To prevent serious injury or death, do not modify or alter Rifton
products or components, or use Rifton products or components
in conjunction with products from other manufacturers. Rifton does not accept
responsibility for any modifications or alterations made to our components or products
after they leave our premises. Customers modifying or altering our components or
products, or using them in conjunction with products from other manufacturers, do so
at their own risk.
WARNING

16
Rifton Contact Information
Mail
Rifton Equipment
PO Box 260
Rifton NY 12471– 0260
Fax
800.865.4674
Phone
800.571.8198
9–5 EST
Online
www.Rifton.com
To order replacement parts
1. Locate the ID number of the product on the small white label.
2. Have this number available when you call 800.571.8198 for your
customer service representative.
Use only replacement parts supplied by Rifton Equipment.
We are glad to supply replacement parts. Although Rifton makes every effort to
supply correct parts and instructions for repairing or refurbishing your equipment,
you are responsible to make sure that the repairs or modifications are correctly and
safely completed.
@
Email
[email protected]
UA04 ECO 3388 Revision J
Find letters of medical necessity
and informative articles at:
www.rifton.com/bathchair