Rimage Desktop 360i Manual

Prepare the Rimage 360i for shipping
Prepare the Rimage 360i for shipping
Before you begin
-Important! Remove the inkjet cartridges.
Pack the unit
1. Prepare the Rimage 360i.
a. Place a piece of tape on the door
latch at the back of the Rimage
360i.
b. Cover the unit with a packing
bag.
c. Tuck the packing bag under the
unit.
112119_A 1

Prepare the Rimage 360i for shipping
2 112119_A
d. Attach the foam forms.
i. If necessary, turn the tabs
(Qty. 3) on the foam forms
so that the form will fit on the
unit.
ii. Place the foam forms on the
cardboard lift.
 Note: Place the
cardboard lift over the
ridge on the foam form to
secure the cardboard.
Rid
g
e
Tabs
Cardboard Lift
iii. Place the cardboard lift and
foam forms so that the
cardboard lift is under the
foam.
iv. Position the unit on the lift
and forms so that the unit
aligns with the edge of the
foam forms.
v. Lift the foam forms to fit on
the sides of the unit.

Prepare the Rimage 360i for shipping
2. Pack the Rimage 360i.
a. Using the cardboard lift, carefully
lift the 360i and the foam forms.
 Tip: Hold opposite handles of
the cardboard lift.
b. Place the 360i and the foam
forms in the packing box as
shown.
c. Place the accessory box over
the 360i.
Accessory
Box
Front of 360i
112119_A 3

Prepare the Rimage 360i for shipping
4 112119_A
d. Close the flaps in the order
shown.
Front of 360i
3. Tape the box.
-Important! Do not tape over the box
handles.