Risco Agility 4 Instruction manual

1
Agility 4
Quick User Guide
This guide describes main user operations. For the full user manual, see our website:
www.riscogroup.com
Away (Full) Arming
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
 Quick mode: Press .
 High security mode: Press ,
then enter code.
[Web application]: Click Full Arm.[SMS]: Enter code + A
Example: 1234A
Press [Smartphone app]: Press .

2
Stay (Home) Arming
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity tag.
 Quick mode: Press .
 High security mode: Press ,
then enter code.
[Web application]: Click Part Arm.[SMS]: Enter code + H
Example: 1234H.
Press [Smartphone app]: Press .
Partition Arming
 Quick mode: Press partition
number (1–3), then press Away
arming ( ) or Stay arming ( ).
 High security mode: Press partition
number (1–3), press Away arming (
) or Stay arming ( ), then
enter code or use proximity tag.
 High security mode: Press partition
number (1–3), press Away arming
( ) or Stay arming ( ), then
enter code.
 Quick mode: Press partition number
(1–3), then press Away arming (
) or Stay arming ( ).
 Quick mode: Press partition
number (1–3), then press Away
arming ( ) or Stay arming ( ).
 High security mode: Press partition
number (1–3), press Away arming (
) or Stay arming ( ), then
enter code or use proximity tag.
[SMS]: Enter code + A(Away) or H
(Home/Stay). Now enter partition
number (1–3). Example: 1234H3.
Partition arming (Away and Stay) via
Smartphone app.

3
Quick Zone Bypass
Press and enter code, at
Activities menu press , at
Bypass Zone press , scroll to
zone to bypass, press .
Quick zone bypass via Smartphone
app.
Press and enter code, at
Activities menu press , at
Bypass Zone press , scroll to
zone to bypass, for each zone
define Y/N using > press
to save.
[SMS]: Enter code + B
+ zone number.
System Disarming
Press then enter code or use
proximity tag.
 Quick mode: Press .
 High security mode: Press ,
then enter code.
Press then enter code or
use proximity tag.
Press .
Press
[SMS]: Enter code + D
Example: 1234D.
[Web Application]: Enter user
code,
then click Disarm.
[Smartphone app]: Press .


4
Partition Disarming
Press partition no. (1–3), press .
Enter code or use proximity tag.
 Quick mode: Press partition
number (1–3), then press .
 High security mode: Press
partition number (1–3), press
enter code.
Press partition no. (1–3), press
. Enter code or use
proximity tag.
Press (for all assigned
partitions)
Press (for all assigned
partitions)
Partition disarming via Smartphone
app.
[SMS]: Enter code + D+ partition
number (1–3). Example: 1234D2
View
/
Hear System Status
NOTE: Short-press for LCD display,
or long-press for display +
announcement.
 Quick mode: Press
High Security mode: Press ,
then enter code or use proximity tag.
View system status via
Smartphone app.
NOTE: Short-press for LCD display,
or long-press for display +
announcement.
 Quick mode: Press
 High Security mode: Press ,
then enter code or use proximity
tag.
[SMS]: Enter code + ST
View Last Alarm
Press for two seconds. View last alarm from Event log via
Smartphone app.
Press for two seconds.
[SMS]: Enter code + AL


5
Panic Alarm
Press and simultaneously.
Press and simultaneously.
Press and simultaneously.
Press and
simultaneously.
Press small button (if installer
defined).
Additional Operations at LCD Keypad
Duress Disarming Press , then enter duress code.
Fire Alarm Press and (LCD Keypad) simultaneously for 2 seconds /
Press and (Panda Keypad) simultaneously for 2 seconds.
Emergency/Medical
Alarm Press and (LCD Keypad) simultaneously for 2 seconds /
Press and (Panda Keypad) simultaneously for 2 seconds.
System Chime On/Off Press for 2 seconds.
Output Control Press , , or (installer-defined) for 2 seconds.
Wake up keypad Press .
Main Panel Speaker
Volume
Press for 2 seconds.
Select volume level (0–4), and then press .
Change keypad and
panel language
Press and simultaneously for 2 seconds.
Scroll to select language, then press .
Additional SMS Commands
Un-bypass Zone: code + UB + zone number
Activate Output: code + UOON + UO number
Deactivate Output: code + UOOFF + UO number

6
Telephone Event Notifications / Command*
When Receiving a Call:
1. Pick up the phone and say “Hello”
or press #;You will then hear an
event announcement message.
2. Now acknowledge the event (see
Acknowledgment menu).
Acknowledgment Menu
 Acknowledge message: Press 1
 Acknowledge and stop all dialing: Press 2 + code + #
 Access Operations menu: Press 3+ code + #
 Listen and Talk: Press 6
 Repeat event message: Press
#
 Repeat the Acknowledgment menu: Press *
Sound Indicators
Intrusion alarm: Continuous, rapid beeping.
Fire alarm: Staggered, rapid beeping.
Exit delay: Slow buzzer beeps until the Exit Delay time period expires.
Entry delay: Slow buzzer beeps until the Entry Delay time period expires.
Confirm operation: 1-second tone.
Reject operation: Three rapid error beeps.
Arm/Disarm chirp: 1 siren chirp = system armed
2 siren chirps = system is disarmed
4 siren chirps = system disarmed after an alarm
\LED Indicators (Wireless Agility Keypad RW132KP)
Power LED (Green)
On: Power OK.
Rapid Flash: AC trouble.
Slow Flash: Low battery
trouble.
Arm/Alarm LED (Red)
On: System fully armed.
Rapid Flash: Alarm.
Slow Flash: System in Exit
Delay.
Ready LED (Green)
On: System ready.
Off: Open zones.
Slow Flash: Ready to arm with
open entry/exit zone.
Trouble LED (Orange)
Rapid Flash: Trouble.
Off: No trouble.
[All LEDS] Learn mode: all
LEDS are flashing, one after the
other.
Stay LED (Red)
On: System partially (Stay) armed.
Off: System disarmed.
\LED Indicators (Wireless Panda Keypad RW332KP)
Cloud Icon
On: System connected to
cloud.
Slow Flash: Cloud
connectivity trouble.
Off: No cloud connectivity
Arm/Alarm Icon
On: System armed.
Rapid Flash: Alarm.
Slow Flash: System in Exit
Delay.
Off: Disarmed
Ready Icon
On: System ready.
Off: Open zones.
Slow Flash: Ready to arm with
open entry/exit zone.
Trouble Icon
On: Trouble.
Off: No trouble.
Tamper Icon
On: Zone/keypad/external
module has been tampered.
Off: Normal operation.
Stay Icon (Red)
On: System partially (Stay) armed
or bypass zones.
Off: No bypass zones.
*Not available during Cloud mode unless a multi-socket communication module is installed.

7
Assign and Edit Users (User Codes) Assign Proximity Tag
1. Press and enter code.
2. Scroll to Codes/Tags, then press .
3. Scroll to User Codes, then press .
4. Scroll to New/Change, then press .
5. Scroll to select the index number (to designate
to a system user), then press .
6. Enter (or re-enter) the new code.
7. Re-enter the new code; the system beeps and
“Accepted” displays.
8. Repeat the above steps for additional codes.
1. Press and enter code.
2. Scroll to Codes/Tags, then press .
3. Scroll to Proximity Tags, then press .
4. Scroll to New/Change, then press .
5. Scroll to select the index number (to
designate to a proximity tag user), then press
.
6. Within 10 seconds, hold the proximity tag; at
1–2 cm from the keypad buttons (LCD
Keypad) / at the right–hand side of the LCD
display (Panda Keypad); a long beep
indicates the tag has been registered.
NOTE: If the tag was already registered, 3
beeps will sound and a message will display.
Registering to the RISCO Cloud
1 Go to www.riscocloud.com and click register
2 Enter your first name and last name.
3 Enter your e-mail address as the Login Name (required for 1st-time activation).
4 Define password (must be: a minimum of eight characters; contain at least one capital letter and
one lower case letter; contain at least one number; and contain at least one special symbol) and
confirm.
5 Enter in the 15 digits Panel ID as it appears: on the postcard that arrived with the panel or
supplied by the installer (also available in the keypad menu as described below).
6 Complete registration form and click Register.
7 To complete registration open the email message received on the email account you defined as
Login Name.
Logging in to the RISCO Cloud / Accessing the Web User Application
1 Go to www.riscocloud.com
2 Enter User Name and Password (same as supplied during the registration process).
3 Enter Passcode/PIN (Agility4 User Code).
4 Click Enter..
iRISCO Smartphone App
Download the iRISCO Smartphone app from the Apple App store or the Android Play Store.

8
© RISCO Group 02/2019. All rights reserved. 5IN2700 C