Campfire™ - Big Table & Big Table with Trough
November 2018 Page 1 of 12
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always
be followed, including the following: Read all instructions before using
the Campfire powered table system.
DANGER
To reduce the risk of electric shock: Always unplug this furnishing
from the electrical outlet before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer.
3. Never operate this furnishing if it has a damaged cord or plug.
Return the furnishing to a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never operate the furnishing with the air openings blocked. Keep
the air openings free of lint, hair, and the like.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
9. Risk of Electric Shock - Connect this furnishing to a properly
grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
This appliance is intended for commercial and residential use only.
Connect this appliance to a properly grounded outlet only. See
grounding Instructions.
Operating Instructions
Please refer to the attached Installation Instructions.
User-Maintenance Instructions
The receptacle power block is equipped with a circuit breaker that
will shut off power in an overload condition. Press to reset the circuit
breaker to restore power.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local
codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or
serviceman if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if
it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal120-V circuit and has a
grounding plug that looks like the plug illustrated in sketch A in Figure
1. Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with this
product.
GROUNDED
OUTLET
GROUNDING
PIN GROUNDED
OUTLET BOX
Figure1
Grounding methods
(A) (B)
METAL
SCREW
ADAPTER
TAB FOR
GROUNDING
SCREW
