Rocket Fish RF-SH230 User manual

Wireless Bluetooth® Headset
Casque d'écoute sans fil
BluetoothMD
Auricular inalámbrico con
Bluetooth®
RF-SH230
User Guide Guide de l’utilisateur Guía del Usuario

2
Rocketfish RF-SH230
Wireless Bluetooth®
Headset
Contents
Introduction ................................................................. 3
Features ......................................................................... 3
Setting up the headset............................................. 6
Using the headset....................................................12
Using the menus ......................................................15
Maintaining................................................................17
Using the headset safely........................................18
Troubleshooting.......................................................19
Specifications.............................................................19
Legal notices..............................................................20
1 Year Limited Warranty.........................................23
Français........................................... 26
Español ........................................... 53
Bluetooth is a registered trademark owned by Bluetooth SIG,
Inc. U.S.A.

3
RF-SH230
Introduction
Thank you for choosing the Rocketfish RF-SH230 Wireless
Bluetooth® Headset. This user guide provides the
information you need to use and care for your headset.
Features
• Interchangeable color plates
• Favorite (speed dial) number (user configurable)
• Favorite number calling identification
• Noise shield audio design for optimum voice quality
• Easy pairing (automatic pairing at power-on)
• Automatic call answer (configurable)
• Power save mode for extended use (auto power off after
12 hours)
• Left or right ear wearable, with or without the ear hook
• 12 configurable ring tones
Package contents
•Headset
• Power supply
• Two removable color faceplates
• Earpiece hook
•Headsetclip
•Userguide

4
Identifying parts (top)
#Part
1 Multi-function button/Indicator light
2 Headset charging socket
3Vol–
4Earhook
5 Headset cord
54
3
2
1

5
RF-SH230
Identifying parts (bottom)
#Part
6Speaker
7Multi-functionarm
8Microphone
9Vol+
9
6
7
8

6
Setting up the headset
Charging the headset
Before using the headset, you need to charge the battery.
To charge the battery:
1Plug the power supply into a power outlet.
2Plug the other end of the power supply into the headset
charging socket [2]. The indicator light [1] turns green to
indicate the headset battery is charging.
3Unplug the headset from the power supply after the
indicator light turns off. The headset is fully charged.
Note:
The headset does not work while charging.
If the indicator light remains off when you connect it to the
power supply, the battery is already fully charged and does
not require further charging.
To maximize battery life, do not charge the headset longer
than necessary.
When your battery is completely discharged, it takes up to
three hours to fully charge your headset.

7
RF-SH230
Battery life may seem short when you first use the headset.
The battery will fully charge after two or three complete
charge/discharge cycles.
Pairing the headset
Auto-pairing
For added convenience, your headset has an auto-pairing
function so that when you turn the headset on for the first
time, it is already in pairing mode. Your headset should beep
every two seconds to indicate that it is in pairing mode, and
can be paired to your mobile phone.
To pair your headset:
1Put the mobile phone into pairing mode (see your
mobile phone user manual). Make sure that the mobile
phone is no more than three feet (one meter) away from
the headset.
2Select the headset name “RF-SH230”.
3Enter the PIN number: 0000. If pairing is successful, the
beeping stops and the indicator flashes every three
seconds.
Normal pairing
Complete this procedure if you want to pair your headset
with another mobile phone.
To pair your headset:
1Make sure that the headset is turned off.
2Put the headset in pairing mode by pressing and holding
the multi-function button for about five seconds. The
indicator light should flash twice every second and you
should hear a series of beeps every two seconds.
3Complete the auto-pairing procedure.

8
Changing the color plates
Your headset comes with two additional interchangeable
color covers to suit your style.
To remove a color cover:
• Place your finger on the end of the cover, close to the
microphone, and gently swing it up.

9
RF-SH230
To install the new cover:
• Insert the cover side with the larger tabs first, then
swing the other side down and press smaller tabs into
the corresponding slots.
Wearing and carrying the headset
You can wear your headset on either ear and carry it in
different ways using the rotating multi-function arm [7].
Wearing the headset without the earhook
You can wear the headset without using the earhook.

10
To wear the headset without the earhook:
1Gently place the speaker [6] into your ear canal.
2Rotate the headset forward and backward to find the
most comfortable position.
Wearing the headset with the earhook
The earhook may be used for maximum comfort and
adjustability.
To mount the earhook:
• Rotate the multi-function arm [7] upwards and slide it
inside the earhook [4] jack.
To place the earhook on your ear:
1Rotate the earhook [4] slightly forwards.
2Gently place the speaker [6] into your ear canal.
3Rotate the earhook [4] backwards and adjust it behind
your ear.