Rockwell Automation Allen-Bradley 140G-G-RMB User manual

DIR 1000719R0604 Version 02 - 140G-G-RMB, 140G-G-RMY, 140G-H-RMB, 140G-H-RMY
Publication 140G-IN080C-EN-P - November 2020
Required Tools
Label
WARNING: To prevent electrical shock, disconnect from power source before
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
70E requirements
Per prevenire infortuni, togliere tensione prima dell'installazione o
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
WARNUNG: Vor Installations- oder Servicearbeiten Stromversorgung zur
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden.
AVERTISSEMENT: Avant le montage et la mise en service, couper l'alimentation
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire
appropriée. Protéger le produit contre les environnements agressifs.
ADVERTENCIA: Desconéctese de la corriente eléctrica, antes de la instalación o
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes.
ATENÇÃO: Para evitar choques, desconectar da corrente elétrica antes de fazer a
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes.
警告：感電事故防止のため、取付けまたは修理の際は電源から取り外してく
ださい。適切なケース内に取付けてください。また、汚染物質がないことを
確認してください。
警告：为了防止触电，在安装或维修之前必须先切断电源。安装在合适的设备
箱内。防止接触污染物。
Installation - Installazione - Installation - Installation -
Instalación - Instalação - -
Comando a maniglia rotante diretto
Drehhebelantrieb direkt
Commande par poignèe rotative directe
Mando giratorio directo
直接旋转手柄控制
Bul. 140G/140MG
Direct Rotary Operating Mechanism for 140G-G, 140G-H, 140G-I, 140G-J
140G-G 140G-I
CLACK
1
140G-H 140G-J
xx lb-in
xx Nm
1
Escutcheon
1
140G-H
140G-I
140G-J
140G-G 3
LENGTH M
36 mm (1.42") M3
1
Screw
Handle
2
LENGTH dia.
9.5 mm (0.37") 3.5
Screw
1
Door
interlock
11
4
121
A B C D E F
PH 1
PH 2

2
DIR 1000719R0604 (Version 02)
12
3 4
Publication 140G-IN080C-EN-P - November 2020
Direct Rotary Operating Mechanism for 140G-G, 140G-H, 140G-I, 140G-J
Fastener location
PH 1PH 1
1.1 Nm
9.7 lb-in
LENGTH M
36 mm (1.42") M 3
140G-G
Fastener location
PH 1
1.1 Nm
9.7 lb-in
LENGTH M
36 mm (1.42") M 3
140G-H
Fastener location
PH 1
1.1 Nm
9.7 lb-in
LENGTH M
36 mm (1.42") M 3
140G-I

3
7
56
Direct Rotary Operating Mechanism for 140G-G, 140G-H, 140G-I, 140G-J
Fastener location
140G-J
APPLY
LABEL
Provided by the Customer.
A carico del Cliente.
Vom kunden Beizustellen.
À la charge du Client.
A cargo del Cliente.
客户自备
from dia. 6 mm to dia. 7 mm
from dia. 0.236" to dia. 0.275"
max N°3
1.1 Nm
9.7 lb-in
LENGTH M
36 mm (1.42") M 3
PH 1
DIR 1000719R0604 (Version 02)
Publication 140G-IN080C-EN-P - November 2020

DIR 1000719R0604 (Version 02)
Copyright © 2020 Rockwell Automation, Inc. A l l Rights Reserved. Printed in USA.
Product certificates are located in the Rockwell Automation Literature Library: rok.auto/certifications.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
EEE Yönetmeliğine Uygundur.
For Technical Support, visit rok.auto/support.
AMERICAS
EUROPE/MIDDLE EAST/AFRICA
ASIA PACIFIC
expanding human possibility
TM
(ECN000110918) - ECN000127783
8
Publication 140G-IN080C-EN-P - November 2020
140G-G 140G-H 140G-I 140G-J
2.07" 2.15" 1.94" 2.15"
52.8 mm 54.8 mm 49.3 mm 54.8 mm
2.34" 2.42" 2.20" 2.42"
59.5 mm 61.5 mm 56 mm 61.5 mm
4.25" 4.72" 4.25" 4.72"
108 mm 120 mm 108 mm 120 mm
A
B
C
C
0.55"/14 mm
0.57"/14.5 mm
dia.0.12"
B
A
3.46"/88 mm
1.59"/40.5 mm
3.18"/81 mm
R min. 7.87"/200 mm
80°
dia. 0.13"/ø 3.5 mm
XX
X
X
Y
Y
= =
Ø 3.25mm
Compartment door interlock
Blocco della porta della cella
Verriegelung der Schaltfeldtür
Verrouillage de la porte du compartiment
Bloqueo (enclavamiento) de la puerta de la celda
4Direct Rotary Operating Mechanism for 140G-G, 140G-H, 140G-I, 140G-J
1.1 Nm
9.7 lb-in
LENGTH dia.
9.5 mm (0.37") 3.5
PH 2