Video Processing Output Connectors
Processing
Supported
Formats
VIDEO
(HD/SD)
RGB
STILL
Composite
S-Video
Analog HD/RGB
Analog SD
Analog HD
(Component)
DVI-D
HD/SD-SDI
Analog RGB
4:2:2 (Y:Pb:Pr), 10 bit
480/59.94i, 576/50i, 480/59.94p, 576/50p, 1080/59.94p, 1080/50p,
1080/59.94i, 1080/50i, 720/59.94p, 720/50p
640 x 480/60 Hz
*1, 800 x 600/60 Hz
*1, 1024 x 768/60 Hz
*1,
1280 x 768/60 Hz
*1, 1280 x 1024/60 Hz
*1, 1600 x 1200/60 Hz,
1920 x 1200/60 Hz
*2
* Conforms to VESA DMT Version 1.0 Revision 10
*1Output refresh rate is 75 Hz when frame rate is set to 50 Hz
*2Reduced blanking
1.0 Vp-p, 75 ohms
Luminance Signal : 1.0 Vp-p, 75 ohms
Chrominance Signal : 0.286 Vp-p, 75 ohms (NTSC)
0.3 Vp-p, 75 ohms (PAL)
0.7 Vp-p, 75 ohms (H, V : 5VTTL)
S-Video (4 pin mini DIN type)x 1
Composite (BNC type)x 1
* Select one from menu
Y/Pb/Pr (BNC type)x 2
D-Sub 15 pin type x 2
* Combined use with analog RGB
R/G/B/H/V (BNC type)x 2
D-Sub 15 pin type x 2
* Combined use with analog HD (Component)
Single Link Type x 2
BNC type x 8
* Conforms to SMPTE 259M-C, SMPTE 292M
Analog SD
Analog HD
(Component)
DVI-D
HD/SD-SDI
S-Video (4 pin mini DIN type)x 1
Composite (BNC type)x 1
Y/Pb/Pr (BNC type)x 1
D-Sub 15 pin type x 1
* D-Sub 15 pin type : combined use with analog RGB
Analog RGB D-Sub 15 pin type x 1
* Combined use with analog HD (Component)
Single Link Type x 2
BNC type x 2
* Conforms to SMPTE 259M-C, SMPTE 292M
TALLY D-Sub 15 pin type x 3 (200 mA, Open Collector type)
Remote MIDI (IN, OUT/THRU)
RS-422 (D-Sub 9 pin type)x 1
USB port (host)A type x 1 for USB memory
REFERENCE BNC type (IN, THRU)
*Black Burst (Sync to Frames), Bi-Level, Tri-Level Sync
Transition Mix, FAM, NAM, Wipe (9 patterns)
Composition PinP, Chroma Key, Luminance Key, Split, DSK
Others Output Fade, Edge Blending, Dual Screen, Span Screen
Power Consumption 90 W
Dimensions 482 (W)x 319.4 (D)x 206.2 (H)mm
19 (W)x 12-5/8 (D)x 8-1/8 (H)inches
Weight 8.1kg
17 lbs 14 oz
Accessories Power Cord,
Owner's Manual
Input/Output Level and Impedance
Input Connectors * Loop thru connectors are equipped for all inputs
Other Connectors
Effects
Others
Windows Bitmap File (.bmp)
* Maximum 1900 x 1200 pixels, 24-bit per pixels, uncompressed
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This product is intended for use in the following Electromagnetic environments:
E1:residential, E2:commercial and light industrial, E3:urban outdoors, E4:controlled EMC environment, ex. recording studio (broadcasting studio) which are specified in EN55103-1 and EN55103-2.