ROOMS TO GO KIDS IVY LEAGUE 2.0 3502360P User manual

WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
-
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
-
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
for replacement parts and instructional literature if needed.
-
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
DO NOT REMOVE WARNING LABEL FROM BED.
-
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
of entrapment or falls.
-Ensure thickness of mattress and foundation combine does not exceed 10 inches (255mm) and
mattress surface is at least 5 inches (127mm) below upper edge of guardrails.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
-
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
-
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
IVY LEAGUE 2.0 COLLECTION
THANK YOU FOR YOUR PURCHASE
1/11/2021 Page 1 of 32

FULL LOFT W/CHEST-BOOKCASE FULL STEP LOFT W/CHEST-BOOKCASE FULL STEP LOFT W/CHEST-BOOKCASE & DESK ATTACHMENT
Reference page 13-16 for assembly steps Reference page 17-23 for assembly steps Reference page 24-32 for assembly steps
3502360P WALNUT 3501326P WHITE 3572360P WALNUT 3571326P WHITE 3582360P WALNUT 3581326P WHITE
CONFIGURATIONS
TWIN LOFT W/CHEST TWIN STEP LOFT W/CHEST TWIN STEP LOFT W/CHEST & DESK ATTACHMENT
Reference page 9-12 for assembly stepsReference page 6-8 for assembly stepsReference page 3-5 for assembly steps
Choose your configuration, read all the instructions, identify all components, and be sure you have all parts prior to assembly
3542360P WALNUT 3541326P WHITE 3632360P WALNUT 3631326P WHITE 3642360P WALNUT 3641326P WHITE
1/11/2021 Page 2 of 32

TWO PEOPLE ARE NEEDED TO ASSEMBLE
DO NOT TIGHTEN COMPLETELY UNTIL ALL PIECES
RTG SKU # STYLE # ITEM DESCRIPTION
RTG SKU # STYLE # ITEM DESCRIPTION
44 Pc
Slats
38000232 100-645 TWIN SLAT PACK (4)
TOOLS NEEDED
Phillips screwdriver (not included)
Allen wrench (included)
TWIN BUNKBED END
36713267 3261720 LADDER
35613264
51 Pc
Ladder
1 1/4" Screws
61 Pc
16 Pcs
5 Drw Loft chest Metal pin
50 mm Bolts
Twin top bunk bed end
1 Pc
32
1/11/2021 Page 3 of
6 Pcs
1 " Screws
2 Pcs
Ladder hook
ARE CONNECTED TOGETHER
PARTS LIST QTY PARTS LIST QTY HARDWARE LIST QTY
22 Pc Headboard/footboard Allen wrench
71 Pc
8 Pcs
Side rails
32 Pc 2 Pcs
11 Pc
Guardrails
3261705 TWIN TOP BUNKBED END
36513263 3261731 2 SIDE RLS/2 GUARD RLS
38000232 100-645 TWIN SLAT PACK (4)
3261706
35913260 3261711 5 DRW. LOFT CHEST
P A R T S L I S T
3502360P TWIN/LOFT W/CHEST WALNUT
35423603 3260706 TWIN BUNKBED END
35923603 3260711 5 DRW. LOFT CHEST
36723600 3260720 LADDER
35623607 3260705 TWIN TOP BUNKBED END
36523606 3260731 2 SIDE RLS/2 GUARD RLS
3501326P TWIN/LOFT W/CHEST WHITE
35413260
A
B
C
D
E
F

32
ASSEMBLY INSTRUCTIONS
Assemble guardrails and tighten all bolts.
Assemble loft chest and top bunkbed end.
Assemble top side rails. then fasten with 1 1/4" screws.
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Screw ladder hooks to pre-drilled holes on top of ladder.
1/11/2021 Page 4 of
Install slats, one on each end, two equally spaced in the middle,
STEP 5
STEP 4
STEP
C
B
D
D
A
B
A
A
D
STEP
STEP 2
B
AC
F
E
E
F
C
A
A
A
A
F
E
A
B
B
A

Twin size mattress- 74" - 75" long and 37-1/2" - 38-1/2" wide
Twin size Bunkie board- 74" long and 37-1/2" wide
Full size mattress- 74" - 75" long and 52-1/2" - 53-1/2" wide
Full size Bunkie board- 74" long and 52-1/2" wide
ASSEMBLY INSTRUCTIONS
Screw ladder to guardrail as shown.
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
1/11/2021 Page 5 of 32
Place Bunkie boards (required, sold separately) on top of the slats
Use only correct mattress dimensions and Bunkie board:
STEP 6
STEP 7
E
E
E