ROSE DISPLAYS ANOGOTCHA ROUND WITH WALL HANGERS User manual

Parts
Step 1
Insert T-Top Gotcha Holder into AnoGotcha
Shell. Fig. 1
Step 2
Push end caps into place. Fig. 2
Step 3
Snap the AnoGotcha Holder completely
open so that hinge is turned up as far as
possible. Insert poster into holder until top of
poster meets top of holder. To close snap the
AnoGotcha Holder shut. Fig. 3
With large or curling graphics, it may be
easier to insert graphic at one end and slide
into holder from one end to another.
Step 4
Install Wall Mounting Hangers using
wood screws and a Phillips head screwdriver.
Make sure that the Wall Mounting Hangers
are level. Fig. 4
Note: The use of Molly Anchors are recom-
mended for drywall installations (predrilling 3/
16” holes is necessary).
Step 5
Suspend poster.
Important note:
Please save and reuse the AnoGotcha Holder,
End Caps and MultiClips for future projects.
Instruction Sheet
AnoGotcha™
Instructions for Hanging
Incept-9.9.02
AnoGotcha™is a trademark and Gotcha®is a registered trademark of Rose
Displays, Ltd. Neither the manufacturer nor any sales agent may be held
liable for injury, loss or damage resulting from the use
of these products. Part #02INSAnoGotchaWallHangers
Figure 4
Figure 2
Figure 1
35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Figure 3
End Caps
06-5525 AnoGotcha Shell
12AG400 T-Top Gotcha
Frame Wall
Mounting
Hangers
06-6067
Wood Screws or
Molly Anchors
2010SC
16-0016