ROSE DISPLAYS ANOFRAME SQUARE WITH NO HANGING User manual

Parts
35 Congress Street, Salem MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
split rails
solid rail
Figure 2
Step 1
Insert corner brackets into vertical
AnoFrame sides. Fig. 1 & Fig. 2.
Note: Assembly brackets tension
tabs face towards outside of frames.
Split rail side is made up of 2 separate
pieces.
Step 2
Assemble frame following steps in
Fig. 3 sliding sides together in the
order shown.
Step 3
Insert poster. Fig 4.
Note: The AnoFrame shown here is
a square profile. It is available in
either square or round profile.
AnoFrameTM
Square Profile Instruction Sheet
solid rail
solid rail
split rails
Instructions For assembly
Revised 8.15.02
Figure 1
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameSQNoHanging
Corner
Brackets
AnoFrame Rail
12AF-100
AnoFrame
Split Rail
Figure 4
Figure 3

Parts
35 Congress Street, Salem MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
split rails
solid rail
Figure 2
Step 1
Insert corner brackets into vertical
AnoFrame sides. Fig. 1 & Fig. 2.
Note: Assembly brackets tension
tabs face towards outside of frames.
Split rail side is made up of 2 separate
pieces.
Step 2
Assemble frame following steps in
Fig. 3 sliding sides together in the
order shown.
Step 3
Insert poster. Fig 4.
Note: The AnoFrame shown here
is a square profile. It is available in
either square or round profile.
AnoFrameTM
Square Profile Instruction Sheet
Instructions For assembly
Revised 8.15.02
Figure 1
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAluFrameSQNoHanging
Corner
Brackets
AnoFrame Rail
12AF-100
AnoFrame
Split Rail
Figure 4
Figure 3
solid rail
solid rail
split rails