Rosewill FBM-01 User manual

User’s Manual

1© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Contents
Opening Chassis P. 4
Installing Motherboard P. 5
Installing Power Supply P. 4
Disassemble Chart P. 2
Accessory Box P. 3
Installing 3.5” HDD
Installing External 5.25" Device P. 7
Installing External 3.5" Device P. 8
P. 8
P. 2
Installation Guide
Information P.9
P. 6
Product Overview
Installing Add On Card

2© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Front I/O Pin Define
USB 2.0 CONNECTOR HD CONNECTORAC97 CONNECTOR
PinPin
MIC
AUD GND
RET~R
RET~L
MIC
MIC~BIAA
FPOUT~R
+5V
FPOUT~L
Pin
AUD GND
PRESENCE#
SENSE1_RETURN
SENSE2_RETURN
PORT1L
PORT1R
PORT2R
SENSE_SEND
PORT2L
Pin
Disassemble Chart
Front Panel
Left Side Panel
Right Side Panel Rear 80mm Fan
Front 120mm Fan

3© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Accessory Box
6 x M/B standoff Motherboard
8 x Screw A Power Supply
Add-on Card
18 x Screw C
Motherboard
5.25” Device
Floppy
8 x Screw B 3.5” HDD
1 x PC SPEAKER Motherboard

4© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Unscrew to remove left and right panel.
Place the power supply from the left side into the
chassis and secure with screws.
1
2
1.
2.
Installation Guide

5© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Installation Guide
3.
-Place the motherboard onto stand-offs and secure with screws.
-Install motherboard stand-offs according to your motherboard’s screw holes.

© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
6
Installation Guide
1
2
-Install the add-on card and secure with screws.
-Confirm which slot you want to install an add-on card
then fracture the slot cover with your screwdriver.
4.

User’s Manual
FBM-01CASE
7© All rights reserved by Rosewill
Installation Guide
5.
6.
-Pull to remove the front panel.
-Confirm which bay you want to install device(S) then
remove the bay cover.
-Reinstall the front panel.
-Insert the 5.25” device from the front apnel into the
chassis then secure with screws.

8© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Installation Guide
Insert the external 3.5” device into its position from front
panel and secure with screws.
Insert the 3.5” HDD into its position from inside and secure
with screws.
7.
8.

9© All rights reserved by Rosewill
User’s Manual
FBM-01CASE
Installation Guide
Make sure all necessary cables and wires are
connected, then
reinstall side panels and secure with screws.
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at : http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any question while using our products, please visit our website : www.rosewill.com
for latest driver & user manual or feel free to contact us.
Support Phone Number: 800-575-9885
Support Email: [email protected]
1
2
9.