Rosewill FBM-05 User manual

FBM-05

1© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
Contents
Opening the Unit P. 4
Installing the Motherboard P. 5
Installing the Power Supply P. 4
Product Diagram P. 2
Accessory Kit P. 3
Care
Installing the 5.25" Device P. 7
Installing the 3.5" Device P. 8
P. 9
Specification Table P. 10
P. 2
Installation Guide
P. 6
Product Overview
Installing the Add-in Card
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at : http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any questions while using our products, please visit our website : www.rosewill.com
for latest driver & user manual.
Support Phone Number: 800-575-9885
Support Email: [email protected]

2© All rights reserved by Rosewill
Front I/O Pinout
USB 2.0 CONNECTOR HD CONNECTORUSB 3.0 CONNECTOR
Pin
AUD GND
PRESENCE#
SENSE1_RETURN
SENSE2_RETURN
PORT1L
PORT1R
PORT2R
SENSE_SEND
PORT2L
Pin
User’s Manual
FBM-05CASE
Product Diagram
Front Panel
Left Side Panel
Right Side Panel Rear 80mm Fan
Front 120mm Fan
VBUS
SSRX1-
SSRX1+
ground
SSTX1-
SSRX1+
ground
D1-
D1+
None
None
VBUS
SSRX2-
SSRX2+
ground
SSTX2-
SSTX2+
ground
D2-
D2+

3© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
Accessory Kit
6Motherboard
8Power Supply
Add-in Card
18
Motherboard
5.25” Device
Floppy
83.5” HDD
1
M/B Standoff
Screw A
Screw C
Screw B
PC Speaker Motherboard
Figure FunctionPart’s Name Qty

4© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
1-1. Untwist the thumbscrews and
slide out panels R and L (Figure 1).
2-1. Secure the power supply under the
top panel with Screw-A (Figure 2).
1
2
1. Open the Unit
2. Install the Power Supply
Installation Guide
Figure 1
Figure 2

3. Install the Mainboard
© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
3-1. Line up the standoffs with the
screw holes on the mainboard
(Figure 3a).
3-2. Screw the mainboard down with
Screw-C (Figure 3b).
5
Figure 3a
Figure 3b

© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
4-2. Install the add-in card and secure with the
Screw-B (Figure 4b).
4-1. Untwist the screws and remove the
slot cover (Figure 4a).
4. Install the Add-in Card
6
Figure 4a
Figure 4b

© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
5. Install the 5.25” Device
5-1. Pull the front panel out and remove it
(Figure 5a).
5-2. Remove the slot covers (Figure 5b).
5-3. Insert the 5.25” drive and push it back
into the case. Secure with Screw-C
(Figure 5c).
7
Figure 5c
Figure 5b
Figure 5a

© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
6-1. Insert the external 3.5” device and push it back
into the case. Secure with Screw B (Figure 6a).
6-2. Insert the internal 3.5” drive and push it back
into the case. Secure with Screw B (Figure 6b).
6. Install the 3.5” Drive
8
Figure 6a
Figure 6b

© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
To prevent damage, all panels should remain
closed and secured.
7-1. Slide the side panels back into place and
secure with thumbscrews (Figure 7).
1
2
7. Care
9
Figure 7

© All rights reserved by Rosewill
User’s Manual
FBM-05CASE
8. Specification Table
10
Model
Model Name
Item Number
Specs
Type
Color
Case Material
Power Supply Mounted
Motherboard Compatibility
With Side Panel Window
Expansion
External 5.25" Drive Bays
Internal 3.5" Drive Bays
Internal 2.5" Drive Bays
Expansion Slots
Front Ports
Front Ports
Cooling System
80mm Fans
120mm Fans
Side Air duct
Physical Specs
Dimensions
FBM-05
11-147-246
Mini Tower
Black
Steel/Plastic
Top
Micro ATX, Mini ITX
No
2
1
2
4
1 x USB 2.0, 1 x USB 3.0, Audio In/Out
1 x Rear (pre-installed)
1 x Top (pre-installed)
No
6.89" x 13.86" x 14.96" (W x H x D)

www.rosewill.com