Rosewill ZIRCON I User manual

1
PRODUCT OVERVIEW
Disassembly Chart (components vary by country)
Thank you for purchasing a Rosewill Case.
Please read the instruction manual before use and retain for future reference.
ZIRCON I
Dimensions: 210 x 440 x 470 mm (W x D x H)
Left Side View
Front View
440 mm210 mm
470 mm
Front Panel
Right Side Panel
120mm Fan
120mm Fan
Bottom Dust Filter
Left Side Panel
Rosewill/11-147-313_ZIRCON I/UM/單色雙面印刷/
左翻摺頁騎馬釘/完成尺寸:148x210mm(A5)/20190830
折線
正面
背面

2 3
INSTALLATION GUIDE
FRONT I/O
1
2. Install Power Supply
2-1. Set the power supply unit (PSU) at the bottom-rear of the case and secure with Screw-A
(Figure 2).
1. Open the Unit
1-1. Remove the thumb screws and take off panel R and L (Figure 1).
2
Accessory Box
FRONT I/O CABLE PINOUT
x8 x18 x8 x1
Screw-A
(6-32 x 6 mm)
Screw-B
(M3 x 5 mm)
Screw-C
(8mm)
VGA Holder
PSU
Add-on Card
Motherboard
2.5” HDD/SSD
3.5” HDD Vertical VGA
Installation
x1 x1 x5
Thumb screw Speaker Cable Tie
VGA Holder Motherboard Cable
Management
x9
Standoff
Motherboard
x2
Slot Cover
PCI-e Slot
Speaker
MIC
USB 3.0
Reset
LED
Power
USB 2.0
USB 3.0 CONNECTOR USB 2.0 CONNECTOR HD Audio CONNECTOR

4 5
3. Install Motherboard
3-1. Secure the motherboard onto the pre-installed standoffs with Screw-B (Figure 3).
4. Install Add-on Card
4-1. Bend to remove the slot covers, then install the add-on card and secure with Screw-A
Figure 4).
3
4
5. Install 3.5”/2.5” HDD/SDD
5-1. Slide the trays out from drive cage (Figure 5a).
5-2. Install SSD/HDD onto the trays and secure with Screw-B or C (Figure 5b/5c).
5b
5-3. Insert the trays back into drive cage (Figure 5d).
5-4. Alternatively, you can also install 2.5” SSD directly onto the front of chassis, securing
with Screw-B (Figure 5e).
5e
5d
5a 5c

6 7
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumb screws.
6-2. Clean the dust lters on top/bottom regularly to ensure adequate airow (Figure 6).
7. Options
7-1. Additional Fan Installation
The ZIRCON I features ample space for additional cooling fans. Please refer to the
Specications Table for options.
7-2. LED Light Mode
Briey press the LED light button to select desired mode:
Rainbow > Red > Green > Blue > Purple > Cyan > Lime > White > RGB-1 (seven-color-
breathing) > RGB-2 (seven-color-blinking) > Off
7-3. Vertical VGA Installation
The ZIRCON I supports vertical VGA installation:
7-3-1: Insert the VGA holder into the slot and twist it counterclockwise (Figure 7a/7b).
7-3-2: Bend to remove the vertical slot cover, then install the VGA card (optional, not
included). Adjust the position of VGA holder and secure with thumb screw (Figure 7c).
7a
7c
7-4. Liquid Cooling Radiator Installation
The ZIRCON I supports the option of installing a 360 mm radiator in the front (Figure
7d) and a 240 mm radiator on the top (Figure 7e) to more effectively cool high-
performance systems:
7d
7b
7e
6

SPECIFICATIONS TABLE
Model
Model Name ZIRCON I
Specifications
Type Mid Tower
Color Black
Case Material Steel/Plastic/Tempered Glass
With Power Supply No
Power Supply Mounted Bottom
Motherboard Compatibility ATX, Micro ATX, Mini ITX
With Side Panel Window Yes/Tempered Glass Side Window
Expansion
Internal 3.5" Drive Bays 2 (0)
Internal 2.5" Drive Bays 2/4
Expansion Slots 7+2
I/O Ports
Front Ports
2 x USB 3.0
2 x USB 2.0
Audio In/Out
LED Modes
Cooling System Options
120 mm Fans
3 x Front (1 x Black Fan pre-installed)
2 x Top (optional)
1 x Rear (1 x RGB Dual Ring Fan pre-installed)
140 mm Fans
2 x Front (optional)
2 x Top (optional)
1 x Rear (optional)
Physical Specifications
Dimensions 8.27 x 18.50 x 17.32 in (W x H x D)
Weight 15.43 lb
ZIRCON I_B
Technical Support Information [email protected] 1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product.