Rosewill Himars Instruction manual

Quick User Guide
Gaming Case

Table of Contents
Thank you for purchasing a Rosewill Computer Case
Please read the instruction manual before using and
retain it for your future reference.
1
• Product Overview
Product Diagram ................................................ 02
Front I/O Pin-out ................................................ 02
Front I/O Diagram .............................................. 03
Accessory Kit...................................................... 03
• Installation Guide
1. Open the Unit ................................................ 04
2. Install the Power Supply ................................ 05
3. Install the Motherboard ................................. 05
4. Install the Add-on Card ................................. 06
5. Install an External 5.25” Device ..................... 07
6. Install a 3.5” or 2.5” Drive .............................. 09
7. Care ............................................................... 11
8. Options .......................................................... 12
• Specications Table ........................................... 13

Gaming Case Quick User Guide
2
HIMARS
Product Overview
Product Diagram (Components vary by country)
Front I/O Pin-out
USB 3.0 CONNECTOR USB 2.0 CONNECTOR HD AUDIO CONNECTOR
Panel L
Dust Filter
HDD Tray
120mm Fan Panel R
Front Panel
HDD Door

3
Gaming Case Quick User GuideHIMARS
Accessory Kit
Front I/O Diagram
Image Part Name Oty Function/Component
Screw-A 4 PSU
Screw-B 19 Motherboard/ 3.5' HDD
Screw-C 20 2.5” HDD/SSD
Screw-D 4 ODD
Screw-E 4 Fan
Standoff 11 Motherboard
Nut Setter 1 Standoff Installation
Cable Tie 5 Cable Management
Power Button Reset Button
HD Audio
In / Out USB 3.0 USB 2.0

Gaming Case Quick User Guide
4
HIMARS
Installation Guide
1. Open the Unit
1-1. Remove the thumbscrews and slide out panels R and L (Figure 1).
1

5
Gaming Case Quick User GuideHIMARS
2. Install the Power Supply
2-1. Seat the power supply unit (PSU) in the bottom-rear of the case and secure with Screw-A
(Figure 2).
3. Install the Motherboard
3-1. Line up the standoffs with the screw holes on the motherboard (Figure 3a).
2
3a

Gaming Case Quick User Guide
6
HIMARS
4. Install the Add-on Card
4-1. Untwist the screws and remove the slot cover (Figure 4a).
3-2. Secure the motherboard down with Screw-B (Figure 3b).
4a
3b

7
Gaming Case Quick User GuideHIMARS
5. Install an External 5.25” Device
5-1. Remove the front panel (Figure 5a).
4-2. Install the add-on card and secure with the screws (Figure 4b).
5a
4b

Gaming Case Quick User Guide
8
HIMARS
5-2. Remove the 5.25” bay cover from the chassis (Figure 5b).
5-3. Insert the 5.25” drive and push it back into the case. Make sure it’s secured (Figure 5c).
5b
5c