Rosewill LINE User manual

User’s Manual

© All rights reserved by Rosewill
User's ManualLINE
CASE
1
Contents
Disassemble Chart P.2
P.3
Accessory Box
Installation Guide
Product Overview
P.10
Information
Opening Chassis P.4
Installing Power Supply P.4
Installing Motherboard P.5
P.7~8Installing External 5.25" Device
P.7~8Installing External 3.5" Device
P.9Installing 3.5”/2.5” HDD/SSD
P.6
Installing Add On Card

© All rights reserved by Rosewill
User's ManualLINE
CASE
( Please refer to your motherboard’s user’s manual to connect. )
Disassemble Chart
USB 3.0 CONNECTOR
USB2.0 CONNECTOR HD CONNECTOR
AC97 CONNECTOR
Top 1x 120mm fan＊
Rear 120mm fan＊
Tool-less kit for
5.25” device＊
Tool-less kit for
3.5” device＊
＊
Left side panel
Right side panel
Front 2x 120mm fan＊
Front panel
5.25” to 3.5”
adapter
one 3.5” to 2x 2.5” SSD adapter ＊
2
( For reference only. Models’ option may be varied by countries. )
＊= optional
USB+5V
LP
LP+
GND
NC
USB+5V
LP
LP+
GND
NO PIN
AUD GND
PRESENCE#
SENSE1 RETURN
NO PIN
SENSE2 RETURN
PORT1L
PORT1R
PORT2R
SENSE SEND
PORT2L
MIC
AUD GND
RET~R
NO PIN
RET~L
MIC
MIC~BIAA
FPOUT~R
+5V
FPOUT~L
NO PIN NO PIN
NO PIN

© All rights reserved by Rosewill
User's ManualLINE
CASE
Accessory Box
Motherboard
3.5” HDD
37 x Screw A
20 x Screw B 2.5” HDD
5.25” device
3.5” device
2 x PCI cover PCI slot
11 x Screw C PCI card
PSU
6 x MB stand-off
1 x PC SPEAKER Motherboard
Motherboard
5 x Cable tie Cables
1 x Stand-off socket Motherboard
Stand-off
3

© All rights reserved by Rosewill
User's ManualLINE
CASE
1.
2.
Unscrew to remove left and right panels.
Place the power supply from the left side into
the chassis and secure with screw-D.
NOTICE :
-If your power supply is equipped with single
fan (120mm, 135mm or 140mm), please have
the fan face to the bottom.
4

© All rights reserved by Rosewill
User's ManualLINE
CASE
3.
-Install motherboard stand-offs according to your motherboard’s form factor.
-Place the motherboard onto stand-offs and secure with screw-A.
* Install/Uninstall stand-offs by stand-off socket.
Motherboard stand-off position
12
5
M = Micro-ATX
A = ATX

© All rights reserved by Rosewill
User's ManualLINE
CASE
4.
-Bend to remove the PCI slot cover.
-Install the add-on card into its position.
-Secure with screw-D.
6
A
B
C

© All rights reserved by Rosewill
User's ManualLINE
CASE
5.
Confirm which bay(s) you want to install
device(s) then remove the bay cover.
Pull from the bottom to remove the front panel.
7

© All rights reserved by Rosewill
User's ManualLINE
CASE
-Put external 3.5” device onto the 5.25” to 3.5” adapter then secure with screw-B.
-Insert external 5.25” & 3.5 “ devices into position then secure with tool-less kits(or screw-B).
UNLOCK LOCK
6.
8

© All rights reserved by Rosewill
User's ManualLINE
CASE
7.
3.5” HDD
LOCK
UNLOCK
2.5” HDD/SSD
3.5” HDD
-Insert it into its slot and secure with tool-less kits(or screw-A).
2.5” HDD/SSD
-Install 2.5” HDD/SSD onto adapter with screw-B.
-Insert it into its slot and secure with tool-less kits(or screw-A).
9

© All rights reserved by Rosewill
User's ManualLINE
CASE
8.
Make sure all necessary cables and
wires are connected, then reinstall
side panels and secure with screws.
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at :http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any question while using our products, please visit our website : www.rosewill.com
for latest driver & user manual or feel free to contact us.
Support Phone Number: 800-575-9885
Support Email: [email protected]
10

www.rosewill.com