Ross Synergy 1 SD User manual

4999DR-174 Rev. 1
Sony MiniDisc MDS-E12 MD Player
Requirements
• Audio Server Interface Software Option
• Serial Interface Cables (pins 4 and 6, and pins 7 and 8 are tied
together on the Sony MiniDisc)
Port Connections
Pinouts
Switcher Setup
To Set Up Communications
1. Press HOME Setup Installation Com Setup 
Type.
•UsetheCom Port knob to select the REMOTE Xport that
you connected the Sony MiniDisc to.
•UsetheDevice knob to select Audio Server.
2. Press Select Device.
•UsetheDevice knob to select MiniDisc.
3. Press Com Type.
•UsetheType knob to select RS-232 (RS-232 NULL on the
Synergy 1).
4. Press Com Settings.
•UsetheBaud knob to select 9600.
•UsetheParity knob to select NONE.
5. Press HOME Confirm.
Device Setup
Ensure the port on the Sony MiniDisc that is connected to the
switcher is configured for RS-232.
Compatibility
Switcher Audio Server
Communications REMOTE Port
(female) RS232C Port
Switcher Sony MiniDisc
2 (Tx) 2 (Rx)
3 (Rx) 3 (Tx)
5 Ground 5 Ground
Audio Server Version
Sony MiniDisc MDS-E12 --
Switchers
Synergy 1 SD --
Synergy Series SD --
Synergy MD/X --
Vision MD/X --
Vision QMD/X 17.0
Vision MultiPanel Support --
Automation
OverDrive 12.0
Port Expanders
BSS4 
Comtrol DeviceMaster 

14