rosseto EZ-SERV User manual

Your EZ-SERV® Standing Dispenser comes with the 6-Wing 1 Tbsp Portion Wheel. This
portion wheel is perfect for dispensing items such as medium grind cookies, cereals &
granolas, trail mixes and coffee beans!
SETTING UP YOUR PRODUCT
1. Carefully remove all parts from packaging and poly bags:
•1 Table Stand
•1 Wooden Tray
•Depending on your model, 1-5 Containers each one with:
a. Lid
b. 6-Wing 1 Oz Portion Wheel
c. Container
d. Label Holder
e. Handle
2. Make sure you have all parts above before discarding packaging.
3.
4.
5.
Repeat Steps 5 thru 8 for the remaining containers.
Attach label holder (d) to bracket as shown in FIGURE A.
6.
7.
8.
9.
10. Dispense as you please!
EZ-SERV® TABLE-TOP DISPENSER WITH WOOD TRAY
FIGURE A
Please contact customer support at [phone] and we’ll be
happy to assist with any assembly questions, comments or concerns.
ROSSETO®3600 W. Pratt Avenue. Lincolnwood, IL 60712
Visitour website at: www.rosseto.com
NEEDASSISTANCE?
6-WING 1 OZ PORTION WHEEL
ITEM # EZP004
FULL CONTAINER (with LID)
ITEM # EZC014S
LABEL HOLDER
ITEM # EZM036
HANDLE
ITEM # EZH012
1. Hold Label Holder horizontally beneath the bracket., above the steel handle.
2. Slide the label holder forward into the slot alloted. There are 2 small wings on the back
portion that will glide over the metal until you can lock it into position.
3. Hold the bottom portion of the label holder
and pull gently until it clicks into place.
4. Insert the desired label.
b
c
d
e
a
Place table stand on a flat surface facing you.
Find the ridges on the underside of the wooden tray – these mark the back of the tray. Place the wooden tray on the base
of the table stand, with the smoother side of the tray facing you.
Fill containers with desired dry product and seal with the lid. (You may also choose to do this after Step 7.)
Hold the container above the stand with the handle facing you. Carefully lower the container down to the metal opening,
tilted at an angle that allows the handle to clear through first.
Note: The back of the container has a small key that aligns with bracket notch to prevent movement from side to side.
Once the handle is cleared through the metal opening, you may tilt the container carefully back to a full upright
position. Then, gently set the container down directly on the stand.
NOTE:
Recommended label size is 60 x 35 mm / 2.35" x 1.4"
1 2 3

CARING FOR YOUR CONTAINER
CLEANING INSTRUCTIONS:
1. Regularly wash all parts of thecontainer inwarm soapy water. Never use abrasive sponge orcloth.
2. When disassembling the container, handle allparts gently. Please refrain from using toomuch force.
2.
3.
4. Gently pull the handle from thefront of thecontainer.
5. Reach into container and remove portion wheel bygentlypulling upwards orturning container upside down.
HOW TO ASSEMBLE:
1. Place portion wheel into container, making sure the holes ofthe portion wheel align with the container’s holes.
2.
3.
4.
Insert handle through front of thecontainer, making sure topush through portion wheel and through the back of
the container.
Fill container with desired dry product and place lid securely onthe container.
Follow Steps 5 thru 10 on Page 1.
•Pro6-SM– 1tablespoon
•EZP005 – 1tablespoon
•EZP012 – 1teaspoon
•EZP013 – 2teaspoons
•EZP014 – 3 teaspoons
•EZP015 – 4teaspoons
The Rosseto interchangeable portion wheels deliver just the right
amount ofproduct every time. Test each wheel with your dry foods
to determine which works best for you!
HOW TO DISASSEMBLE:
3. Reassemble the unit only after all parts are completely dry.
Please contact customer support at(847)763-1215 and we’ll be
happy to assist with any assembly questions, comments or concerns.
ROSSETO®3600 W. Pratt Avenue. Lincolnwood, IL 60712
Visitour website at: www.rosseto.com
NEEDASSISTANCE?
RELATED ITEMS
Black Matte Table-Top Dispensers with Walnut Tray Nickel Metallic Table-Top Dispensers with Bamboo Tray
•EZ518: 1 pc 1.3-gallon container
•EZ529: 1 pc 2-gallon container
•EZ530: 1 pc 3.5-gallon container
•EZ541: 2 pcs 3.5-gallon containers
Need a different-sized portion wheel? We have 6 more options for you tochoose from!
•EZ520: 3 pcs 1.3-gallon containers
•EZ522: 5 pcs 1.3-gallon containers
•EZ545: 1 pc 1.3-gallon container
•EZ550: 1 pc 2-gallon container
•EZ551: 1 pc 3.5-gallon container
•EZ547: 3 pcs 1.3-gallon containers
1. Gently lift your container by a couple of inches, stopping before the steel handle hits the metal. Angle the top of
the container towards you until the back end of the handle shaft is cleared through the opening. After this, you
may clear the rest of the container through the opening. Handle your container with care by making sure the
steel handle does not hit the metal!
Remove lid from top of container. Make sure there is no remaining product inside that can spill over.
Other portion wheels available:
Set your container on a secure flat surface.
2014 February 12 IS010 - V3