Rosslare Mifare CP-R25 Mounting instructions

2012
March
CP-R25 & AS-B01
Mifare®Card Programmer/Fingerprint
Swipe Enrollment Station and Software
Hardware and Software Manual

Copyright © 2012 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to REL, RSP Inc. and/or
their related companies and/or subsidiaries’ (hereafter:”ROSSLARE”). Only ROSSLARE
and its customers have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of
ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or other
intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN THIS
DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS AND OTHER
LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND TRANSMITTAL TO THIRD
PARTIES WITHOUT EXPRESS WRITTEN PERMISSION MAY RESULT IN LEGAL
PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any third party any
license to these patents, trademarks, copyrights or other intellectual property rights,
except as expressly provided in any written agreement of ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time, without
being obliged to announce such revisions or changes beforehand or after the fact.

Table of Contents
CP-R25 Hardware and AS-B01 Software Manual iii
Table of Contents
1. Introduction....................................................................... 8
1.1 The CP-R25 System............................................................................. 8
1.2 Desktop Convenience ......................................................................... 8
1.3 Intuitive Software System.................................................................... 8
1.4 Compatibility...................................................................................... 9
1.5 Main Features..................................................................................... 9
1.6 CP-R25 Desktop Programmer.............................................................. 9
1.7 AS-B01 Software ................................................................................ 9
2. Specifications and Requirements.................................. 10
2.1 CP-R25 Hardware Specifications ....................................................... 10
2.2 AS-B01 Software Requirements ........................................................ 11
3. Installation ...................................................................... 12
3.1 Unpacking the Equipment................................................................. 12
3.2 CP-R25 Description........................................................................... 12
3.3 AS-B01 Software Installation............................................................. 12
3.4 Connecting the CP-R25 .................................................................... 15
4. AS-B01 Software Overview and LEDs ........................... 18
4.1 Software Overview ........................................................................... 18
4.2 Indication LEDs ................................................................................. 19
5. Programming Cards and Tags........................................ 21
5.1 Programming a Master Card ............................................................. 23
5.2 Programming a Configuration Card .................................................. 23
5.2.1 Sector Reader Configuration Cards ............................................................ 24
5.2.2 Fingerprint Swipe Reader Configuration Cards............................................ 25
5.3 Programming User Cards or Tags ...................................................... 26
5.3.1 Programming a Sector Reader User Card.................................................... 26
5.3.2 Programming and Enrolling Fingerprint User Card....................................... 27

Table of Contents
iv CP-R25 Hardware and AS-B01 Software Manual
6. Additional Programmer Utilities................................... 30
6.1 Card Utilities..................................................................................... 30
6.1.1 Reading a Configuration Card.................................................................... 30
6.1.2 Reading an ID from a User Card................................................................. 31
6.1.3 Programming a User Card ID...................................................................... 31
6.1.4 Changing the User Card KeyA in a Specific Sector ...................................... 32
6.1.5 Changing the User Card KeyA in All Sectors ............................................... 33
6.1.6 Erasing Specific User Card Data.................................................................. 34
6.1.7 Read Serial Number and Card Type ............................................................ 35
6.1.8 Changing KeyA and Erasing All Data.......................................................... 35
6.2 Fingerprint Utilities............................................................................ 36
6.2.1 Enrolling Fingerprints on a Pre-configured User Card .................................. 36
6.2.2 Verifying Fingerprint Enrollment on a User Card.......................................... 37
7. Global Options ................................................................ 39
7.1 Change Password ............................................................................. 39
7.2 Card Overwrite ................................................................................. 39
7.3 Updating Firmware ........................................................................... 40
A. Maintenance .................................................................... 42
B. Field Descriptions ........................................................... 43
C. Additional Mifare®Card Memory Map Information ... 45
C.1 Manufacture Block ........................................................................... 45
C.2 Data Blocks....................................................................................... 45
D. Sample Worksheets ........................................................ 47
E. Limited Warranty ............................................................ 48

List of Figures
CP-R25 Hardware and AS-B01 Software Manual v
List of Figures
Figure 1: The CP-R25...................................................................................... 8
Figure 2: CP-R25 Components ..................................................................... 12
Figure 3: AS-B01 Setup – Welcome Screen ................................................... 13
Figure 4: AS-B01 Setup – Select Installation Folder........................................ 14
Figure 5: ASB01 Setup – Disk Space Availability ............................................ 14
Figure 6: AS-B01 Login Dialog...................................................................... 15
Figure 7: AS-B01 – Main Window................................................................. 16
Figure 8: AS-B01 Connectivity – Connected.................................................. 17
Figure 9: AS-B01 – Main Window Layout...................................................... 18
Figure 10: AS-B01 Sector Reader Configuration Tab Areas............................ 22
Figure 11: CP-R25 Antenna Areas ................................................................ 22
Figure 12: Read Configuration Card ............................................................. 30
Figure 13: Read ID from User Card ............................................................... 31
Figure 14: Program ID into User Card ........................................................... 32
Figure 15: Change User Card KeyA on Selected Sector ................................. 32
Figure 16: Change User Card KeyA on All Sectors......................................... 33
Figure 17: Erase User Card Selected Block..................................................... 34
Figure 18: Read Serial Number and Card Type .............................................. 35
Figure 19: Change User Card KeyA and Erase Data – All Sectors ................... 36
Figure 20: Enroll Fingerprints to Card............................................................ 37
Figure 21: Verify Live Fingerprints ................................................................. 38
Figure 22: AS-B01 Change Password............................................................ 39
Figure 23: Enable Card Overwrite Popup Window ........................................ 40
Figure 24: AS-B01 Desktop Reader Firmware Programming .......................... 40
Figure 25: Disconnect USB Cable.................................................................. 41
Figure 26: Connect USB Cable...................................................................... 41
Figure 27: Mifare®1K Memory Diagram....................................................... 46

List of Tables
vi CP-R25 Hardware and AS-B01 Software Manual
List of Tables
Table 1: Indication LEDs................................................................................ 19
Table 2: Field Descriptions ............................................................................ 43

Notice and Disclaimer
CP-R25 Hardware and AS-B01 Software Manual vii
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or software
described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND
THE USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.
The system must not be used for purposes other than those for which it
was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.
ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or
subsidiaries’ (hereafter:"ROSSLARE") exclusive warranty and liability is
limited to the warranty and liability statement provided in an appendix at
the end of this document.
This manual describes the maximum configuration of the system with the
maximum number of functions, including future options. Therefore, not
all functions described in this manual may be available in the specific
system and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the
purpose of illustration and reference only.
In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss of
profits or revenue, cost of capital or loss of use of any property or capital
or injury).
All graphics in this manual are for reference only, some deviation between
the image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).

Introduction
8 CP-R25 Hardware and AS-B01 Software Manual
1. Introduction
Rosslare's CP-R25 is a desktop Mifare®and fingerprint card programmer for
Mifare®1K and 4K RFID proximity cards and tags.
The CP-R25 makes managing fingerprint and Mifare®cards easier and can help
facilitate the effective deployment and control of any facility code application,
including access control, intrusion, and time and attendance applications.
1.1 The CP-R25 System
The CP-R25 is built for high-security, portability and ease of use, enabling high
quality Mifare®and fingerprint enrollment at a low cost.
The CP-R25 programmer is controlled by computer using Rosslare's powerful
AS-B01 Programmer software package.
1.2 Desktop Convenience
The CP-R25 is small and lightweight, with a slim and attractive design. It is
built for convenience and portability, with a USB 2.0 computer interface, which
makes it quick to install and allows it to run without any additional power
source.
Figure 1: The CP-R25
Designed to sit safely on any desktop, the CP-R25 is sturdily built, with large
card and fingerprint trays and surface-gripping rubber feet.
1.3 Intuitive Software System
The AS-B01 is a software application intended for programming Mifare®cards,
tags and fingerprints using Rosslare's CP-R25 Desktop Programmer.
The system includes a security authentication system and a real-time
operations log.
Using this tool requires basic understanding of Mifare®cards memory
architecture and access condition mechanisms.

Introduction
CP-R25 Hardware and AS-B01 Software Manual 9
The software does not support all Mifare®cards features required by the
systems using the CP-R25 programmed Mifare®cards.
1.4 Compatibility
The CP-R25 Desktop Programmer and AS-B01 software are compatible with
other products, including but not limited to:
AY-W6260 and AY-W6360 Read-Sector, Smartcard, Read-Write Access
Control reader family
AY-Q6260 and AY-Q6360 Anti-vandal, read-sector, Smartcard, Read-
Write Access Control reader family
AY-Bx663 (X=1,3,4) Mifare®Smartcard Fingerprint Swipe Sensor family
1.5 Main Features
The CP-R25 Desktop Programmer is a feature-rich Mifare®card programmer
and fingerprint enroller.
1.6 CP-R25 Desktop Programmer
Enables the user to read, verify, and program Mifare®proximity cards
Uses a swipe type fingerprint sensor
Supports USB 2.0 computer connections
Utilizes LED and buzzer sub-systems to indicate programming, card, and
power supply status
Runs a thorough internal diagnostic self-test every time it is powered up
1.7 AS-B01 Software
Programs fingerprints on User cards
Programs ID data on User cards
Produces configuration cards for Rosslare Mifare®readers
Performs firmware updates on supported desktop programmers
Maintains a user log to provide feedback to the software user
Provides password protection
Indicates valid connections with Desktop Programmer

Specifications and Requirements
10 CP-R25 Hardware and AS-B01 Software Manual
2. Specifications and Requirements
2.1 CP-R25 Hardware Specifications
Data Specifications
Cards Mifare®Classic 1K and 4K
RF Frequency 13.56 MHz
Bit rate 106 kHz
Fingerprint Reader Specifications
Sensor type Swipe type UPEK TCS4C-TCD50A
Sensor ESD Rating Sensor technology – Capacitive sensor
Electrostatic Discharge: Up to +/- 15 kV air discharge on the sensor surface
FAR – False Accept Rate Actual values depend on specific user's finger, usage
condition and quality of enrollment.
Specification – 0.0010% (1/100000)
FRR – False Reject Rate Actual values depend on specific user's finger, usage
condition and quality of enrollment.
Specification – 2% (1/50)
Electrical Specifications
Operating Voltage 5 VDC Via USB
Input Current 75 mA (standby)
160 mA (maximum)
CP-R25 Physical Specifications
Dimensions
(L x W x H)
17.3 x 5.8 x 3.3 cm
6.18 x 2.28 x 1.30 inch
Weight 309 g (10.89 oz.)
Environmental Data
Operating Temperature 10ºC to 50ºC
(50ºF to 122ºF)
Operating Humidity 5% to 93% (non-condensing)

Specifications and Requirements
CP-R25 Hardware and AS-B01 Software Manual 11
2.2 AS-B01 Software Requirements
Minimum Software Requirements
Operating System Windows XP SP2
Framework Microsoft .NET 2
Processor 400 MHz Pentium or equivalent
RAM Memory 512 Mbytes
Free HD space: 1 Gigabyte
Connection Port USB

Installation
12 CP-R25 Hardware and AS-B01 Software Manual
3. Installation
3.1 Unpacking the Equipment
The CP-R25 programmer is ready to use immediately "out of the box" and
includes a USB cable and documentation.
Please confirm all the items listed below are received before beginning. If any
items are missing, contact your dealer immediately.
One CP-R25 Programmer
One Male A to Male B USB Cable
One Software CD
Instruction Manual
3.2 CP-R25 Description
The following figure illustrates the CP-R25 components:
Figure 2: CP-R25 Components
3.3 AS-B01 Software Installation
The AS-B01 software is included on the installation CD-ROM, which is
packaged with the CP-R25 hardware.

Installation
CP-R25 Hardware and AS-B01 Software Manual 13
To install the AS-B01 software for the first time:
1. Insert the CD into the computer's CD drive.
2. If the Autoloader does not initiate the installation, open My Computer,
double-click on the CD drive icon and then double-click the AS-B01 setup
file.
If Microsoft .NET 2 Framework is not installed on the computer, it is installed
automatically before beginning the AS-B01 installation.
The installation package extracts the installation files. After the files are
extracted, the Welcome to the CP-R25 Setup Wizard screen opens.
Figure 3: AS-B01 Setup – Welcome Screen
3. Click Next.
The Select Installation Folder screen opens.

Installation
14 CP-R25 Hardware and AS-B01 Software Manual
Figure 4: AS-B01 Setup – Select Installation Folder
4. [Optional]Click Disk Cost…. to ensure the computer has sufficient space.
The
AS-B01 Setup Disk Space window opens.
Figure 5: ASB01 Setup – Disk Space Availability
5. Select the users allowed to use the program, Everyone or Just me.
For security purposes it is suggested that Just me is selected.
6. [Optional] You can change the destination folder of the installation:
a. Click Browse.
The standard Windows Explorer window opens.
b. Navigate to and select the required folder.
7. Click Next to continue the installation process.
The
Confirm Installation screen opens.

Installation
CP-R25 Hardware and AS-B01 Software Manual 15
8. Click Next.
The installation process is initiated. When the process finishes, the
Installation Complete screen opens.
9. Click Close to complete the installation process.
3.4 Connecting the CP-R25
The CP-R25 unit does not require special installation. Follow the following
steps to prepare the unit for enrollment.
Before connecting the CP-R25 hardware, ensure that the ASB01 software is
installed and running.
To connect the CP-R25:
1. Click the AS-B01 icon on the desktop or select the program from the
Rosslare folder in the Start menu. The login dialog opens.
Figure 6: AS-B01 Login Dialog
2. Enter a password.
When using the application for the first time, use the default password of
"admin".
After initial use, make sure to change the default password to your
company’s approved password (see Section 7.1).
The AS-B01 software Main Window opens.

Installation
16 CP-R25 Hardware and AS-B01 Software Manual
Figure 7: AS-B01 – Main Window
At the bottom left of the main window, the connection indication is red
with the description “Disconnected”.
3. Connect the Desktop Programmer to a PC using the USB cable – one
cable end connects to the PC USB host port output and the other end
connects to the USB connector on the Desktop Programmer.
Windows®automatically installs the required drivers. The Desktop
Programmer receives its power through the USB; no external power
supply is required.
On the AS-B01 main window, the connection indicator at the bottom of
the window changes from red to green with the description
“Connected” to indicate that the CP-R25 Desktop Programmer is
connected. In addition, the CPR-26 tab that was previously visible closes,
leaving only the CPR-25 tab visible.

Installation
CP-R25 Hardware and AS-B01 Software Manual 17
Figure 8: AS-B01 Connectivity – Connected
The event log displays a connected message.
If the indicator does not turn green, and the description still indicates
Disconnected after the USB cable is connected, try disconnecting the USB
cable from the Desktop Programmer and reconnecting it.
When the hardware and software are disconnected, the software can only
function in demonstration mode.
Once the indicator is green and the description is Connected,the CP-R25
Desktop Programmer is ready for use.

AS-B01 Software Overview and LEDs
18 CP-R25 Hardware and AS-B01 Software Manual
4. AS-B01 Software Overview and
LEDs
This section describes the AS-B01 and CP-R25 LEDs.
4.1 Software Overview
Once the login is completed with the correct password, the main software
window opens.
Figure 9: AS-B01 – Main Window Layout
The AS-B01 main window consists of the following functional areas:
File menu area – Used for general operations such as setting global
options on the Desktop Programmer, getting version information, and
closing the software.
Configuration Tab area – The main working area, which is used for
entering and displaying all card and swipe configuration parameters.

AS-B01 Software Overview and LEDs
CP-R25 Hardware and AS-B01 Software Manual 19
Descriptions for fields requiring parameters under all the tabs are described in
Appendix A.
There are two programming tabs:
Sector reader – Used to configure and read sector reader cards. This
tab allows configuring both User ID/Card Serial number user cards as
well as Reader Configuration cards.
Swipe reader – Used to write and read cards containing fingerprint
templates. This tab also allows creating configuration cards for
fingerprint readers.
Message log area – The event log records all activities and provides the
user with real time system monitoring. The information messages may
either be operation success or failure messages, or instruction messages
such as during fingerprint enrollment.
Status information area – Indicates connection status with the CP-R25
Desktop Programmer hardware.
4.2 Indication LEDs
The following table describes LED behavior on the CP-R25 Programmer (see
Figure 2).
Table 1: Indication LEDs
Event Swipe Card Reader
LED
Fingerprint
Reader LED
Buzzer Fingerprint
Directional
Indication LED
General
Power on One red LED lights for several seconds followed by all the LEDs flashing and
the buzzer beeps 3 times for the duration of 3 seconds.
Card Programming
Card not
loaded
Green flashing All off Off All on
Card
loaded On card detection, green turns on for 1
second, then off
All off On card
detection short
beep, then off
All on
Write card
success
Green on for 3 sec All off 3 High tone
beeps
All on
Write card
fail
Red on for 3 seconds All off Long buzz All on

AS-B01 Software Overview and LEDs
20 CP-R25 Hardware and AS-B01 Software Manual
Event Swipe Card Reader
LED
Fingerprint
Reader LED
Buzzer Fingerprint
Directional
Indication LED
Fingerprint Scanning
Waiting
for
fingerprint
Off Green flashes Off Rolling LEDs in
circular mode to
indicate finger
swipe
Read
fingerprint
success
Off Green on for 3
sec 3 high-tone beeps Rolling LEDs in circular mode to
indicate finger
swipe
Read
fingerprint
fail
Off Red on for 3
sec Long buzz
Turning all LEDs
on, and then
according to
status, leaving all
on or going back
to circular mode
Read finger timeout – When no finger is passed over the scanner for 30
seconds, the CP-R25 Desktop Programmer goes back to Standby mode of
swipe LEDs.