Rosslare AYC-E 5 Series Assembly instructions

AYC-Ex5/T65 Series
Convertible Backlit Proximity & PIN
Readers/Controllers
Installation and Programming Manual
Ex5 Models:
AYC-E55
AYC-E65BB
AYC-E65BG
AYC-E65BW
T65 Models:
AYC-T65B
AYC-T65N
AYC-Ex5
AYC-T65

Copyright © 2019 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to
ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or
subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers
have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or by
any means, electronic or mechanical, for any purpose, without the express
written permission of ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or
other intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN
THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT
LAWS AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE,
REPRODUCTION, AND TRANSMITTAL TO THIRD PARTIES WITHOUT
EXPRESS WRITTEN PERMISSION MAY RESULT IN LEGAL PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any
third party any license to these patents, trademarks, copyrights or other
intellectual property rights, except as expressly provided in any written
agreement of ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time,
without being obliged to announce such revisions or changes beforehand or
after the fact.

Table of Contents
AYC-Ex5/T65 Series Installation and Programming Manual iii
Table of Contents
1. Introduction...........................................................................9
1.1 Reader/Controller Types............................................................ 9
1.2 Box Content ............................................................................. 10
1.3 Ancillary Equipment................................................................. 10
2. Installation ..........................................................................11
2.1 Mounting.................................................................................. 11
2.2 Wiring....................................................................................... 12
2.2.1 Wiring the Unit as a Reader.............................................................12
2.2.2 Wiring the Unit as a Controller.........................................................13
3. Reader Operation ................................................................16
3.1 General..................................................................................... 16
3.2 Programming as a Reader....................................................... 17
3.2.1 Entering Programming Mode..........................................................18
3.2.2 Exiting Programming Mode ............................................................18
3.2.3 Selecting Keypad Transmission Format........................................19
3.2.4 Selecting Proximity Card Transmission Format ...........................24
3.2.5 Changing the Programming Code ..................................................26
3.2.6 Changing the Facility Code..............................................................27
3.2.7 Setting the Backlight Behavior........................................................27
3.2.8 Return to Factory Default Settings .................................................28
3.2.9 Replacing a Lost Programming Code ............................................29
4. Controller Operation............................................................30
4.1 Normal, Secure, and Master Users.......................................... 30
4.2 Modes of Operation................................................................. 31

Table of Contents
iv AYC-Ex5/T65 Series Installation and Programming Manual
4.2.1 Normal Mode ....................................................................................31
4.2.2 Bypass Mode ....................................................................................31
4.2.3 Secure Mode.....................................................................................32
4.2.4 Changing the Modes of Operation .................................................32
4.3 Auxiliary Input and Output ....................................................... 34
4.4 Door Alarms............................................................................. 34
4.5 Internal Case and Back Tamper .............................................. 34
4.6 Lockout Feature (Keypad Tamper).......................................... 34
4.7 REX Function ........................................................................... 35
4.8 Secured Intelligent Power Supply............................................ 35
4.9 Programming as a Controller .................................................. 36
4.9.1 Entering Programming Mode..........................................................37
4.9.2 Exiting Programming Mode ............................................................37
4.9.3 Changing Lock Strike Code .............................................................38
4.9.4 Changing Auxiliary Code..................................................................38
4.9.5 Changing the Programming Code..................................................39
4.9.6 Changing the Normal/Secure Code ...............................................40
4.9.7 Changing the Normal/Bypass Code and Door Chime Settings...40
4.9.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike
Release Time ....................................................................................41
4.9.9 Defining the Auxiliary Input and Output .........................................43
4.9.10 Setting the Lockout Feature ............................................................48
4.9.11 Setting the Backlight Behavior........................................................49
4.9.12 Enrolling Primary and Secondary Codes........................................50
4.9.13 Deleting Primary and Secondary Codes ........................................54
4.9.14 Relay Codes Assignment.................................................................56
4.9.15 PIN Code Length/Factory Default Settings ...................................59
4.9.16 Replacing a Lost Programming Code ............................................59

Table of Contents
AYC-Ex5/T65 Series Installation and Programming Manual v
4.9.17 Exiting Secure Mode if Normal/Secure Code was Lost ...............60
5. Technical Specifications .....................................................61
A. Declaration of Conformity ...................................................63
B. Limited Warranty.................................................................64

List of Figures
vi AYC-Ex5/T65 Series Installation and Programming Manual
List of Figures
Figure 1: Drilling and Mounting Template..........................................................11
Figure 2: Controller Application Wiring Diagram...............................................14
Figure 3: Controller Wiring – Using the Internal Power ....................................15
Figure 4: Controller Wiring – Using the External Power ...................................15

List of Tables
AYC-Ex5/T65 Series Installation and Programming Manual vii
List of Tables
Table 1: Wiring the Reader to the Controller......................................................12
Table 2: Wiring the Unit as a Controller..............................................................13
Table 3: Reader Programming Menus ...............................................................17
Table 4: Controller Programming Menu.............................................................36
Table 5: Quick Reference Guide for Auxiliary Mode Setting ............................43

Notice and Disclaimer
8 AYC-Ex5/T65 Series Installation and Programming Manual
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or
software described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.
The system must not be used for purposes other than those for which it
was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.
ROSSLARE exclusive warranty and liability is limited to the warranty and
liability statement provided in an appendix at the end of this document.
This manual describes the maximum configuration of the system with
the maximum number of functions, including future options. Therefore,
not all functions described in this manual may be available in the
specific system and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or
any responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the
purpose of illustration and reference only.
All data contained herein subject to change without prior notice.
In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss
of profits or revenue, cost of capital or loss of use of any property or
capital or injury).
All graphics in this manual are for reference only, some deviation
between the image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).

Introduction
AYC-Ex5/T65 Series Installation and Programming Manual 9
1. Introduction
The AYC-Ex5/T65 series are integrated convertible readers and
controllers with a piezoelectric keypad. The units are vandal
resistant and water resistant, suitable for indoor or outdoor
mounting.
These units automatically determine whether to function as a
reader or as a controller. If the unit is connected to a standard
access control unit, then it functions as a reader. If the unit is
connected to a Rosslare secured intelligent power supply, it
functions as a secured controller.
As a controller, the units accept up to 500 users, and allow entry via
a personal identification number (PIN) and/or by presenting a
proximity card. The PIN code length for the controller has several
options. The PIN code length can be a set number of 4, 5, or 6 digits
or it can be a 4- to 8-digit code.
For information on how the unit functions as a reader, see
Chapter 3.
For information on how the unit functions as a controller, see
Chapter 4.
1.1 Reader/Controller Types
The different types of units described in this manual are:
Type E55 has PIN only
Types E65 and T65 have PIN and proximity card
Backlight
Keypad Type
Proximity
AYC-E55 Piezoelectric 
AYC-E65B Piezoelectric 
AYC-E65BB Piezoelectric 
AYC-T65 Piezoelectric 

Introduction
10 AYC-Ex5/T65 Series Installation and Programming Manual
1.2 Box Content
Before beginning verify that all of the following is in the box. If
anything is missing, please report the discrepancy to your nearest
Rosslare office.
One AYC-Ex5/T65 unit
Installation kit
Installation and operating instructions
1.3 Ancillary Equipment
The following equipment is required to complete your installation:
When functioning as a reader:
Compatible host controller (not supplied)– UL listed access
control unit, such as model AC-215U
When functioning as a controller:
Secured intelligent power supply – such as the PC-25T,
PS-A25T, PS-C25T, or PS-C25TU secure controllers
The controller connects to the following:
Electric lock strike mechanism or a magnetic lock device,
which implements fail safe (power to lock) or fail secure
(power to open) functions.
Request-to-Exit (REX) button – normally open type
Switch is closed when pressed.
Door monitor switch
Rosslare accessories can be found on www.rosslaresecurity.com.

Installation
AYC-Ex5/T65 Series Installation and Programming Manual 11
2. Installation
Installation of an RFID reader adjacent to metallic surfaces
might alter the reader’s specifications. To diminish this
interference, use a plastic spacer when mounting the reader.
2.1 Mounting
Before starting, select the location to mount the unit. This location
should be at shoulder height.
To mount the unit:
1. Peel off the back of the self-adhesive mounting label template
and place it on the required mounting location.
2. Using the template as a guide, drill two holes (of the size
indicated on the template) on the surface to mount the unit
(Figure 1).
Figure 1: Drilling and Mounting Template
AYC-Ex5 AYC-T65

Installation
12 AYC-Ex5/T65 Series Installation and Programming Manual
3. Insert the wall plugs into both mounting holes.
4. Drill a 10-mm (7/16”) hole for the cable. If the surface is metal,
place a grommet or electrical tape around the edge of the hole.
5. Insert the unit’s cable wire into the cable hole and wire the unit
as described in Section 2.2.
6. Using the two mounting screws, screw the unit to the wall
through the two wall plugs.
The unit can also be mounted using strong epoxy glue. After
application, firmly hold the unit in place until the glue dries.
2.2 Wiring
The unit is supplied with a 6-conductor 150-cm (60-in.) pigtail with
exposed wires coated with solder.
2.2.1 Wiring the Unit as a Reader
If you connect the unit to a standard access control unit, it
automatically functions as a reader.
To connect the unit as a reader (to a controller):
1. Select the appropriate connections according to Table 1.
Table 1: Wiring the Reader to the Controller
Wire Color Function
Black/Shield Ground (+)
Red Vin (-)
Green Data 0/Data (D0)
White Data 1/Clock (D1)
Brown LED control
Purple Tamper
2. Prepare the controller cable by cutting the cable jacket back 3.2
cm (1¼”) and strip the wire 1.3 cm (½”).

Installation
AYC-Ex5/T65 Series Installation and Programming Manual 13
3. Splice the reader’s pigtail wires to the corresponding controller
wires and cover each joint with insulating tape.
4. If the tamper output is being utilized, connect the purple wire to
the correct input on the controller.
5. Trim and cover all conductors that are not used.
•The individual wires extending from the reader are color-coded
according to the required Wiegand standard.
•When using a separate power supply for the reader, this supply and
the controller’s power supply must have a common ground. A linear
power supply is recommended.
•Attach the cable shield wire on the reader to an earth ground (best),
or to a signal ground connection at the panel or power supply end
of the cable. This configuration is best for shielding the reader
cable from external interference.
2.2.2 Wiring the Unit as a Controller
If you connect the unit to a Rosslare secured power supply, it
automatically functions as a controller.
To connect the unit as a controller:
1. Select the appropriate connections according to Table 2.
Table 2: Wiring the Unit as a Controller
Controller Wire Color Function Note
- Red +DC Input Wired to the PS-x25x
+ Black Ground Wired to the PS-x25x
C 1 White Communication Wired to the PS-x25x
C 2 Green Communication Wired to the PS-x25x
AUX. IN Brown AuxiliaryInput Wired to input
N/A Purple Not in use N/A

Installation
14 AYC-Ex5/T65 Series Installation and Programming Manual
Attach the cable shield wire on the unit to an earth ground (best).
You can also attach it to a signal ground connection at the panel
or power supply end of the cable. This configuration is best for
shielding the controller cable from external interference.
2. Prepare the secured power supply’s cable by cutting the cable
jacket back 3.2 cm (1¼”) and strip the wire 1.3 cm (½”).
3. Splice the controller pigtail wires to the corresponding secured
power supply’s wires and cover each joint with insulating tape.
4. Trim and cover all conductors not used.
5. To connect the unit to the desired power supply option, refer to
the relevant wiring diagrams that follow.
Figure 2 shows the wiring for the controller application using a dual
relay secured intelligent power supply.
Figure 2: Controller Application Wiring Diagram

Installation
AYC-Ex5/T65 Series Installation and Programming Manual 15
Figure 3 shows the auxiliary output connection using the internal
power.
Figure 3: Controller Wiring – Using the Internal Power
Figure 4 shows the auxiliary output connection using the external
power.
Figure 4: Controller Wiring – Using the External Power

Reader Operation
16 AYC-Ex5/T65 Series Installation and Programming Manual
3. Reader Operation
The AYC-Ex5/T65 series can function both as a reader and as a
controller. If the unit is connected to standard access controller, it
functions as a reader, indicated by one beep immediately after
power-on reset.
The use of a proximity card is not relevant for the AYC-E55
model.
3.1 General
The default mode of the reader is Standby mode. In Standby mode,
the unit is ready to receive data from a presented proximity card or
an entered PIN code.
Programming the reader is done via the unit's keypad driven
programming menu system (Section 3.2).
Keypad data can be sent via one of eight keypad transmission
formats. For more information, see Section 3.2.3.
Rosslare proximity cards presented to the reader can output card
data as Wiegand 26-Bit, Clock & Data, and Wiegand + PIN. See
Section 3.2.4 for more information.
When the reader is in Standby mode, the left LED
is red and the right LED is off.
When the reader is in Programming mode, the
left LED is off and the right LED is green.
When a proximity card is presented or a keypad
entry is being transmitted, the left LED flashes
green.
Red
Green
Green

Reader Operation
AYC-Ex5/T65 Series Installation and Programming Manual 17
3.2 Programming as a Reader
Programming is done solely via the unit's keypad driven
Programming Menu System. During the manufacturing process,
certain codes and settings are pre-programmed. These settings are
called the default factory settings.
Table 3 shows the names of all the reader programming menus.
Default factory settings are marked by a "*" sign.
Table 3: Reader Programming Menus
Menu Description Default
1 Selecting Keypad Transmission Format
Single Key, Wiegand 6-Bit (Rosslare Format)
Single Key, Wiegand 6-Bit with Nibble + Parity Bits
Single Key, Wiegand 8-Bit, Nibbles Complemented
4 Keys Binary + Facility Code, Wiegand 26-Bit
1 to 5 Keys + Facility Code, Wiegand 26-Bit
6 Keys BCD and Parity Bits, Wiegand 26-Bit
1 to 8 Keys BCD, Clock & Data
*
2 Selecting Card Transmission Format
Wiegand 26-Bit
Clock & Data
Wiegand Card + PIN
*
3 Changing the Programming Code 1234
4 Changing the Facility Code 0
6 Backlight Options
Off
On (default)
Off until key press when on for 10 seconds
Dimmed until key press when on for 10 seconds
*
0 Return to Factory Default Settings

Reader Operation
18 AYC-Ex5/T65 Series Installation and Programming Manual
3.2.1 Entering Programming Mode
To reach the Programming Menu System, the unit must first be
placed into Programming mode.
•The factory 4-digit Programming code is 1234.
•If a Programming code is not entered within 30 seconds, the unit
returns to Standby mode.
To enter Programming mode:
1. Press #four times.
The left LED turns off and the right LED turns
red.
2. Enter your 4-digit Programming code.
If the Programming code is valid, the right
LED turns green.
If the Programming code is invalid, you hear a long beep and
the reader returns to Standby mode.
If no key is pressed for 30 seconds while in Programming
mode, the unit returns to Standby mode
3.2.2 Exiting Programming Mode
To exit Programming mode:
1. Press #to exit Programming mode at any time.
You hear a beep.
The left LED turns red and the right LED turns
off.
This indicates that the unit has returned to Standby mode.
Red
Green
Red

Reader Operation
AYC-Ex5/T65 Series Installation and Programming Manual 19
3.2.3 Selecting Keypad Transmission Format
There are seven keypad transmission formats.
More information on each of the keypad transmission formats is
presented in Section 3.2.3.1.
Only one keypad transmission format can be active at any one time.
To select the keypad transmission format:
1. Enter Programming mode.
2. Press 1to enter Menu 1.
The left LED turns red.
3. Enter one of the following options:
1– Single Key, Wiegand 6-Bit (Rosslare Format) (default)
2– Single Key, Wiegand 6-Bit with Nibble + Parity Bits
3– Single Key, Wiegand 8-Bit, Nibbles Complemented
4– 4 Keys Binary + Facility Code, Wiegand 26-Bit
5– 1 to 5 Keys + Facility Code, Wiegand 26-Bit
6– 6 Keys BCD and Parity Bits, Wiegand 26-Bit
8– 1 to 8 Keys BCD, Clock & Data Single Key
When selecting Option 8, the right LED turns orange and an
additional input is required to specify the number of keys in
the PIN code.
You hear three beeps.
The system returns to Standby mode.
Green
Red
Green
Red

Reader Operation
20 AYC-Ex5/T65 Series Installation and Programming Manual
If an incorrect option number is entered, the reader returns to
Standby mode and the keypad transmission format remains
unchanged.
3.2.3.1 Keypad Transmission Formats
Option 1: Single Key, Wiegand 6-Bit (Rosslare Format)
Each key press immediately sends 4 bits with 2 parity bits added –
even parity for the first 3 bits and odd parity for the last 3 bits.
0 = 1 1010 0 = "A" in Hexadecimal 6 = 1 0110 0
1 = 0 0001 0 7 = 1 0111 1
2 = 0 0010 0 8 = 1 1000 1
3 = 0 0011 1 9 = 1 1001 0
4 = 1 0100 1 = 1 1011 1 = "B" in Hexadecimal
5 = 1 0101 0 # = 0 1100 1 = "C" in Hexadecimal
Option 2: Single Key, Wiegand 6-Bit Nibble and Parities
Each key press immediately sends 4 bits with 2 parity bits added –
even parity for the first 3 bits and odd parity for the last 3 bits.
0 = 0 0000 1 6 = 1 0110 0
1 = 0 0001 0 7 = 1 0111 1
2 = 0 0010 0 8 = 1 1000 1
3 = 0 0011 1 9 = 1 1001 0
4 = 1 0100 1 = 1 1010 0 = "A" in Hexadecimal
5 = 1 0101 0 # = 1 1011 1 = "B" in Hexadecimal